• Tootmise kuupäev alates: 2007
• tootmise kuupäev kuni: 2011
• Fitting Position: Front Axle
• Nimetus: Kaitsemts/kaitsekumm,amort
• Tootja: MAX

• Fitting Position: Front Axle
• Required quantity: 2
• Material: Thermoplast
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AB-MZ-011
• Tootja: NTY

• Height [mm]: 245
• Weight [kg]: 0.07
• Fitting Position: Front Axle
• Inner Diameter 2 [mm]: 70
• Inner Diameter 1 [mm]: 61
• Required quantity: 2
• Nimetus: TG TED63230
• Tootja: TEDGUM

• Riikide valik: Euroopa
• Fitting Position: Rear Axle
• Bellows Material: Thermoplast
• Height [mm]: 238
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 241
• Inner Diameter [mm]: 72, 65
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.17
• Nimetus: Kaitsemts/kaitsekumm,amort
• Tootja: FEB
• Kogus pakendis: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta kuni: 12.2010
• Fitting Position: Front Axle
• Weight [kg]: 0.125
• Packaging length [cm]: 24
• Packaging width [cm]: 8
• Packaging height [cm]: 8
• Tootja: FEBEST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Suspension Strut
• Nimetus: CFD 564111
• Tootja: DACO

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Tootja: DENCKERMANN AMORTYZATORY

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Article number of recommended accessories: 72-2439
• Nimetus: AMORT
• Tootja: MAX
• Lisainfo: MGA-5697

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: SMA0021
• Shock Absorber Design: Telescopic Shock Absorber
• Tootja: ASHIKA

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: SMJ0021
• Shock Absorber Design: Telescopic Shock Absorber
• Tootja: JAPKO

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Tootja: JAPKO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Tootja: ASHIKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Tootja: JP GROUP
• Lisainfo: Shock Absorber

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Tootja: AUTO-GH

• Šassii: tavavedrustusega sõidukile
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Nimetus: Gas shock absorber
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
VOLVO S40 04-
(kvaliteediklass: PJ)"

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: SM0021
• Shock Absorber Design: Telescopic Shock Absorber
• Nimetus: AMORT
• Tootja: JPA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Nimetus: AMORT
• Tootja: JPA

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Nimetus: CFD 454810R
• Tootja: DACO

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Nimetus: CFD 454810L
• Tootja: DACO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Thread Size: M8x1.25
• Piston Rod Length [mm]: 246
• Suspension: for vehicles with standard suspension
• Piston Rod Diameter [mm]: 11
• Suspension Strut Outer Diameter [mm]: 38
• Tootja: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• paired article number: 11-0338
• Article number of recommended accessories: 72-2439
• Nimetus: AMORT
• Tootja: MAX

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• paired article number: 11-0339
• Article number of recommended accessories: 72-2439
• Nimetus: AMORT
• Tootja: MAX

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Tootja: JP GROUP
• Lisainfo: Shock Absorber

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Tootja: JP GROUP
• Lisainfo: Shock Absorber

• Installatsiooni pool: Esisild
• Šassii: sportvedrustusega sõidukile
• Fitting Position: Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Tootja: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Esisild
• Šassii: sõidukitele koos komfortvedrustusega
• Fitting Position: Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Tootja: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Esisild
• Šassii: tavavedrustusega sõidukile
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Right
• Shock Absorber Mounting Type: Top pin
• paired article number: 232-01-068
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Esisild
• Šassii: sõidukitele koos komfortvedrustusega
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Left
• Shock Absorber Mounting Type: Top pin
• paired article number: 232-01-067
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Length [mm]: 689
• Length 2 [mm]: 476
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 38
• Diameter 2 [mm]: 25
• Spring Type: for vehicles with coil spring suspension
• Tootja: MAGNETI MARELLI
• Nimetus: MM 3022G

• Installatsiooni pool: Esisild
• Šassii: tavavedrustusega sõidukile
• OE-numbri kontrollimine:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Right
• paired article number: 11-0472
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: MAX
• Lisainfo: MGA-5828

• Installatsiooni pool: Esisild
• Šassii: tavavedrustusega sõidukile
• OE-numbri kontrollimine:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Left
• paired article number: 11-0471
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: MAX
• Lisainfo: MGA-5829

• Fitting Position: Front Axle, Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• paired article number: GH-354850V
• Article number of recommended accessories: GH-694702
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Tootja: AUTO-GH

• Fitting Position: Front Axle, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• paired article number: GH-354850H
• Article number of recommended accessories: GH-694702
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Tootja: AUTO-GH

• Šassii: tavavedrustusega sõidukile
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Right
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Nimetus: Gas shock absorber right
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
MAZDA 3/FORD C-MAX
(kvaliteediklass: PJ)"

• Šassii: tavavedrustusega sõidukile
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Left
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Nimetus: Gas shock absorber left
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
MAZDA 3/FORD C-MAX
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• paired article number: 11-0682
• Shock Absorber System: Twin-Tube
• Nimetus: Amort
• Tootja: MAX

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• paired article number: 11-0681
• Shock Absorber System: Twin-Tube
• Nimetus: Amort
• Tootja: MAX

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• paired article number: MJ00538
• Article number of recommended accessories: SMJ0001
• Shock Absorber Mounting Type: Top pin
• Tootja: JAPKO

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• paired article number: MJ00539
• Article number of recommended accessories: SMJ0001
• Shock Absorber Mounting Type: Top pin
• Tootja: JAPKO

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• paired article number: MA-00539
• Article number of recommended accessories: SMA0001
• Shock Absorber Mounting Type: Top pin
• Tootja: ASHIKA

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• paired article number: MA-00538
• Article number of recommended accessories: SMA0001
• Shock Absorber Mounting Type: Top pin
• Tootja: ASHIKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: 714 740 0006
• Replace in pairs only:
• Nimetus: AMORT
• Tootja: MEY

• Kogus pakendis: 2
• Quantity per axle: 1
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Length 1 [mm]: 682
• Length 2 [mm]: 476
• Supplementary Article/Supplementary Info: without accessories
• Weight [kg]: 3.5
• Observe technical data:
• Tootja: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Nimetus: AMORT
• Tootja: KYB

• Tootmise kuupäev alates: 2007
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.646
• Packaging length [cm]: 53.5
• Packaging width [cm]: 4.3
• Packaging height [cm]: 4.3
• Tootja: FEBEST

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 714 641 1014, 714 640 0008
• Replace in pairs only:
• paired article number: 526 623 0006
• Nimetus: AMORT
• Tootja: MEY

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 714 641 1014, 714 640 0008
• Replace in pairs only:
• paired article number: 526 623 0007
• Nimetus: AMORT
• Tootja: MEY

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Nimetus: AMORT
• Tootja: BIL
• Kvaliteediklass: Q

Lisainfo: "Tootja: BILSTEIN
VOLVO S40 04-
(kvaliteediklass: Q)"

• Fitting Position: Front Axle Right
• Length [mm]: 540
• Length 2 [mm]: 371
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 52
• Diameter 2 [mm]: 32
• paired article number: 357209070200
• Spring Type: for vehicles with coil spring suspension
• Tootja: MAGNETI MARELLI
• Nimetus: MM 7209GR

• Fitting Position: Front Axle Left
• Length [mm]: 540
• Length 2 [mm]: 371
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 52
• Diameter 2 [mm]: 32
• paired article number: 357209070100
• Spring Type: for vehicles with coil spring suspension
• Tootja: MAGNETI MARELLI
• Nimetus: MM 7209GL

• Ehitusaasta kuni: 12.2010
• Installatsiooni pool: Tagasild
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.82
• Bore Diameter [mm]: 25
• Piston Rod Diameter [mm]: 11
• Article number of recommended accessories: MK394, PK184
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Tootja: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Ehitusaasta kuni: 12.2010
• Installatsiooni pool: esisild vasakul
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4
• Bore Diameter [mm]: 35
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK282, PK156
• paired article number: G8811
• Packaging length [cm]: 71.2
• Packaging width [cm]: 21.5
• Packaging height [cm]: 21.7
• Tootja: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Ehitusaasta kuni: 12.2010
• Installatsiooni pool: esisild paremal
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4
• Bore Diameter [mm]: 35
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK282, PK156
• paired article number: G8812
• Packaging length [cm]: 71.2
• Packaging width [cm]: 21.5
• Packaging height [cm]: 21.7
• Tootja: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Kogus pakendis: 2
• Quantity per axle: 1
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Length 1 [mm]: 500
• Length 2 [mm]: 312
• Piston Rod Diameter [mm]: 22
• Observe technical data:
• Tootja: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• OE-numbri kontrollimine:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV27/13X218A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Nimetus: AMORT
• Tootja: SAA

SVHC: No information available, please contact the manufacturer!

• Šassii: tavavedrustusega sõidukile
• OE-numbri kontrollimine:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE32/22X164A
• Fitting Position: Front Axle Left
• paired article number: 313 665
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: SAA

SVHC: No information available, please contact the manufacturer!

• Šassii: sportvedrustusega sõidukile
• OE-numbri kontrollimine:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE32/22X164A
• Fitting Position: Front Axle Right
• paired article number: 313 667
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• paired article number: 334842
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: KYB

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• paired article number: 334843
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: KYB

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• paired article number: 22-112811
• Shock Absorber System: Twin-Tube
• Tootja: BILSTEIN
• Nimetus: BI 22-112880
• Kvaliteediklass: Q

Lisainfo: "Tootja: BILSTEIN
F.FOCUS II/MAZDA 3
(kvaliteediklass: Q)"

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• paired article number: 22-112880
• Shock Absorber System: Twin-Tube
• Nimetus: AMORT
• Tootja: BIL
• Kvaliteediklass: Q

Lisainfo: "Tootja: BILSTEIN
F.FOCUS II/MAZDA 3
(kvaliteediklass: Q)"

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Nimetus: BI 24-196529
• Tootja: BILSTEIN

Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• paired article number: 35-110743
• Shock Absorber System: Single Tube Upside Down
• Tootja: BILSTEIN
• Nimetus: Sport shock absorber left
• Kvaliteediklass: Q

Lisainfo: "Tootja: BILSTEIN
FOCUS C-MAX 03-
(kvaliteediklass: Q)"

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• paired article number: 35-110736
• Shock Absorber System: Single Tube Upside Down
• Tootja: BILSTEIN
• Nimetus: Sport shock absorber right
• Kvaliteediklass: Q

Lisainfo: "Tootja: BILSTEIN
FOCUS C-MAX 03-
(kvaliteediklass: Q)"

• Šassii: sportvedrustusega sõidukile
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• paired article number: 35-110774
• Shock Absorber System: Single Tube Upside Down
• Tootja: BILSTEIN
• Nimetus: BI 35-110767
• Kvaliteediklass: Q

Lisainfo: "Tootja: BILSTEIN
VOLVO S40 II
(kvaliteediklass: Q)"