• Fitting Position: Front Axle both sides
• Number of Teeth: 49
• Material: Steel
• Inner Diameter [mm]: 72
• Outer Diameter [mm]: 82
• Fabrication Number: NZA-VV-002
• Tootja: NTY
• Nimetus: NTY NZA-VV-002

• Kerenumber (VIN) kuni: 190962, 213000
• Installatsiooni pool: esisild vasakul, esisild paremal
• Mudeliaasta kuni: 2015
• Plokieraldus:
• Kerenumber (VIN) alates: 190963, 213001
• Sensor Type: Hall Sensor
• Braking/Drive Dynamics: for vehicles without ESP
• Tootja: JP GROUP
• Lisainfo: Sensor, wheel speed

Sõidukivarustus: ilma kokkupõrke vältimise süsteemita sõidukite jaoks, kokkupõrke vältimise süsteemiga sõidukite jaoks

• Fitting Position: Front Axle both sides
• Number of Teeth: 48
• Inner Diameter [mm]: 71.9
• Thickness [mm]: 8.6
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-FR-011
• Tootja: NTY
• Nimetus: NTY HCA-FR-011

• Installatsiooni pool: esisild paremal
• Overall Length [mm]: 50
• Length [mm]: 25
• Sensor Type: Active sensor
• Socket colour: grey
• Weight [kg]: 0.05
• Tootja: A.B.S.
• Lisainfo: FE31253

• Fitting Position: Front Axle
• Sensor Type: Hall Sensor
• Number of pins: 2
• Connector Shape: angular
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: esisild mõlemapoolselt
• Inner Diameter [mm]: 71.9
• Width [mm]: 8.6
• Outer Diameter [mm]: 81.5
• Number of Teeth, ABS ring: 48
• Tootja: TRISCAN
• Lisainfo: VOLVO

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-VV-017
• Tootja: NTY

• vajaminev tükihulk: 2
• Installatsiooni pool: Tagasild
• Supplementary Article/Info 2: without cable
• Tootja: DENCKERMANN FILTRY

• Installatsiooni pool: esisild vasakul, Esisild
• Plokieraldus:
• Number of pins: 2
• Tootja: DELLO AUTOMEGA

Sõidukivarustus: kokkupõrke vältimise süsteemiga sõidukite jaoks, ilma kokkupõrke vältimise süsteemita sõidukite jaoks

• vajaminev tükihulk: 2
• Installatsiooni pool: Esisild
• Supplementary Article/Info 2: without cable
• Tootja: DENCKERMANN FILTRY

• Installatsiooni pool: esisild paremal
• Sensor Type: Active sensor
• Length [mm]: 25
• Socket colour: grey
• Tootja: JP GROUP

• Sõidukivarustus: kokkupõrke vältimise süsteemiga sõidukite jaoks
• Fitting Position: Front Axle Left
• Fabrication Number: HCA-VV-014
• Tootja: NTY

• Installatsiooni pool: esisild paremal
• Sõidukivarustus: kokkupõrke vältimise süsteemiga sõidukite jaoks
• Kerenumber (VIN) kuni: 213000
• Plokieraldus:
• Kerenumber (VIN) alates: 213001
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: esisild paremal, esisild vasakul
• Sensor Type: Active sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Braking/Drive Dynamics: for vehicles without ESP
• Fitting Depth [mm]: 25
• Tootja: AUTOFREN SEINSA
• Nimetus: SE DS0021

• Sõidukivarustus: kokkupõrke vältimise süsteemiga sõidukite jaoks
• vajaminev tükihulk: 1
• Installatsiooni pool: esisild vasakul
• Supplementary Article/Info 2: without cable
• Tootja: BREMI

• Installatsiooni pool: esisild vasakul
• Colour: black
• Sensor Type: Active sensor
• Length [mm]: 25
• Tootja: JPN

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Tootja: AUTO-GH

• Fitting Position: Front Axle
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Voltage [V]: 12
• Weight [kg]: 0.02
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Tootja: ENERGY

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Number of pins: 2
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Kerenumber (VIN) kuni: 190962, 213000, 213026
• Plokieraldus:
• Kerenumber (VIN) alates: 190963, 213001
• Varustusaste: RL01, RL06, RL07
• Supplementary Article/Info 2: without cable
• Length [mm]: 42
• Tootja: TOPRAN HANS PRIES

Sõidukivarustus: ilma Active City Stop süsteemita sõidukite jaoks, kokkupõrke vältimise süsteemiga sõidukite jaoks General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Length [mm]: 55
• Weight [kg]: 0.022
• Packaging length [cm]: 9
• Packaging width [cm]: 5
• Packaging height [cm]: 4.5
• Tootja: FEBEST

• Fitting Position: Front Axle
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.02
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 06SKV001
• Tootja: ESEN SKV

• Installatsiooni pool: esisild vasakul
• Overall Length [mm]: 55
• Length [mm]: 25
• Sensor Type: Active sensor
• Socket colour: black
• paired article number: 30130
• Weight [kg]: 0.08
• Tootja: A.B.S.

• Mootorikood: B 4204 T7
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• vajaminev tükihulk: 2
• Sensor Length [mm]: 14
• Nimetus: EP 1.960.018
• Tootja: EPS

• Fitting Position: Front Axle
• Rated Voltage [V]: 12
• Guarantee: 5 years guarantee
• Nimetus: HU 131655
• Tootja: HUECO / HITACHI

• Mootorikood: B 4204 T7
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• vajaminev tükihulk: 2
• Sensor Length [mm]: 14
• Tootja: FACET

• Installatsiooni pool: esisild vasakul
• Overall Length [mm]: 55
• Braking/Drive Dynamics: for vehicles with ABS
• Sensor Type: Active sensor
• Rated Voltage [V]: 12
• Weight [kg]: 0.008
• Socket colour: black
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: esisild paremal
• Hulk: 1
• Sõidukivarustus: kokkupõrke vältimise süsteemiga sõidukite jaoks
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE SS20581

• Installatsiooni pool: Tagasild
• Hulk: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE SS20677

• Installatsiooni pool: Tagasild
• Overall Length [mm]: 38
• Length [mm]: 14
• Sensor Type: Active sensor
• Socket colour: grey
• paired article number: 30421
• Weight [kg]: 0.05
• Tootja: A.B.S.

• Sõidukivarustus: kokkupõrke vältimise süsteemiga sõidukite jaoks
• vajaminev tükihulk: 1
• Installatsiooni pool: esisild paremal
• Supplementary Article/Info 2: with cable
• Tootja: BREMI

• Mootorikood: B 4204 T7
• Installatsiooni pool: esisild vasakul, esisild paremal
• vajaminev tükihulk: 2, 1
• Plokieraldus:
• Sensor Length [mm]: 24.9
• Nimetus: EP 1.960.005
• Tootja: EPS

Sõidukivarustus: ilma kokkupõrke vältimise süsteemita sõidukite jaoks, kokkupõrke vältimise süsteemiga sõidukite jaoks

• Mootorikood: B 4204 T7
• Installatsiooni pool: esisild vasakul, esisild paremal
• vajaminev tükihulk: 2, 1
• Plokieraldus:
• Sensor Length [mm]: 24.9
• Tootja: FACET

Sõidukivarustus: ilma kokkupõrke vältimise süsteemita sõidukite jaoks, kokkupõrke vältimise süsteemiga sõidukite jaoks

• Installatsiooni pool: esisild paremal
• Number of connectors: 2
• Weight [kg]: 0.009
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Plokieraldus:
• Number of connectors: 2
• Weight [kg]: 0.009
• Tootja: FEBI BILSTEIN

Sõidukivarustus: kokkupõrke vältimise süsteemiga sõidukite jaoks, ilma kokkupõrke vältimise süsteemita sõidukite jaoks General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Plokieraldus:
• Number of connectors: 2
• Weight [kg]: 0.009
• Tootja: BLUE PRINT ELEKTRYKA

Sõidukivarustus: kokkupõrke vältimise süsteemiga sõidukite jaoks, ilma kokkupõrke vältimise süsteemita sõidukite jaoks General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild, esisild vasakul
• mudeli koodi jaoks: (-)Collision Warning, (+)Collision Warning
• Plokieraldus:
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE SS20104

• Sõidukivarustus: kokkupõrke vältimise süsteemiga sõidukite jaoks
• Fitting Position: Brake Booster
• Brake System: ATE
• Tootja: ATE

• Ehitusaasta alates: 11.2010
• vajaminev tükihulk: 2
• Voltage [V]: 12
• Fitting Position: Front Axle
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PU012039961

Sõidukivarustus: ilma kokkupõrke vältimise süsteemita sõidukite jaoks Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 38
• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.01
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front Axle Left
• paired article number: GH-704814H
• Tootja: AUTO-GH

• Installatsiooni pool: esisild vasakul, esisild paremal
• Plokieraldus:
• Kerenumber (VIN) kuni: 213000
• Number of pins: 2
• Corresponds to the original part in colour: black
• Tootja: METZGER

Sõidukivarustus: ilma kokkupõrke vältimise süsteemita sõidukite jaoks

• Mootorikood: B 4204 T7
• Installatsiooni pool: esisild paremal
• vajaminev tükihulk: 1
• Sõidukivarustus: kokkupõrke vältimise süsteemiga sõidukite jaoks
• Sensor Length [mm]: 24.9
• Nimetus: EP 1.960.181
• Tootja: EPS

• Mootorikood: B 4204 T7
• Installatsiooni pool: esisild paremal
• vajaminev tükihulk: 1
• Sõidukivarustus: kokkupõrke vältimise süsteemiga sõidukite jaoks
• Sensor Length [mm]: 24.9
• Tootja: FACET

• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Weight [kg]: 0.008
• Fitting Position: Rear Axle
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta kuni: 07.2014
• Installatsiooni pool: esisild paremal
• Tootja: BOSCH

• Ehitusaasta alates: 11.2010
• vajaminev tükihulk: 1
• Sõidukivarustus: kokkupõrke vältimise süsteemiga sõidukite jaoks
• Voltage [V]: 12
• Sensor Type: Active sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fitting Position: Front Axle Right
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Ehitusaasta kuni: 07.2014
• Installatsiooni pool: Tagasild
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Overall Length [mm]: 38
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Tootja: BOSCH

• Installatsiooni pool: Esisild, esisild vasakul
• vajaminev tükihulk: 2, 1
• Plokieraldus:
• Net weight [kg]: 0.01
• Tootja: NK

Sõidukivarustus: ilma kokkupõrke vältimise süsteemita sõidukite jaoks, kokkupõrke vältimise süsteemiga sõidukite jaoks

• Fitting Position: Front Axle Left, Front Axle Right
• Number of pins: 2
• Fitting Depth [mm]: 24.5
• Weight [kg]: 0.01
• Resistor M[ohm]: 1.3
• Tootja: ERA

• Installatsiooni pool: esisild paremal
• Sõidukivarustus: kokkupõrke vältimise süsteemiga sõidukite jaoks
• Kerenumber (VIN) kuni: 213000
• Plokieraldus:
• Kerenumber (VIN) alates: 213001
• Supplementary Article/Info 2: without cable
• Tootja: METZGER

• Installatsiooni pool: esisild paremal
• Kerenumber (VIN) alates: 213001
• Length [mm]: 55
• Sensor Type: Active sensor
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Tagasild
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Length [mm]: 38
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Sõidukivarustus: kokkupõrke vältimise süsteemiga sõidukite jaoks
• Fitting Position: Brake Booster
• Connector Shape: D Shape
• Number of pins: 3
• for OE number: 163 540 12 17
• Brake System: ATE
• Weight [kg]: 0.064
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.