• Fitting Position: Front Axle Left, Front Axle Right
• Tootja: JP GROUP
• Lisainfo: Protective Cap/Bellow, shock absorber

• Hulk: 2
• Installatsiooni pool: Esisild
• Kaal (kg): 0,07
• Materjal: Termoplast
• vajaminev tükihulk: 2
• Välisläbimõõt [mm]: 68, 80
• Üldine informatsioon: protective pipe; front
• Tootja: VIKA

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Nimetus: Kaitsemts/kaitsekumm,amort
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mudeliaasta alates: 2016
• Fitting Position: Front Axle
• Weight [kg]: 0.108
• Packaging length [cm]: 19
• Packaging width [cm]: 7.8
• Packaging height [cm]: 7.8
• Height [mm]: 200
• Tootja: FEBEST

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Nimetus: SW 30 93 6006
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• Materjal: Termoplast
• Tootja: FAST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Twin-Tube
• Tootja: KAMOKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Twin-Tube
• Tootja: KAMOKA AMORTYZATORY

• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-kinnitusliik: silm üleval, Silma all
• Amort-süsteem: kaks toru
• Amort-Ehitusliik: Teleskoop-amort
• Tootja: ASHIKA-AMORTYZATORY

• Nimetus: Gas shock absorber
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
VW CADDY III
(kvaliteediklass: PJ)"

• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-kinnitusliik: silm üleval, Silma all
• Amort-süsteem: kaks toru
• Amort-Ehitusliik: Teleskoop-amort
• Tootja: JAPKO

• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Teleskoop-amort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: silm üleval, Silma all
• Tootja: KAVO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Nimetus: AMORT
• Tootja: JPA

• Telg: tugevdatud käändmik
• Kandevõime: kõrgendtud kandevõime jaoks
• Installatsiooni pool: Tagasild, Tagasild paremal, Tagasild vasakul
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: silm üleval, Silma all
• Tootja: AUTO-GH

Šassii: tavavedrustusega sõidukile, tugevdatud šassiiga sõidukile, madaldatud vedrustusega sõidukile

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Tootja: KAMOKA AMORTYZATORY

• Telg: tugevdatud käändmik
• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Vedruamort-välisläbimõõt [mm]: 55
• Tootja: AUTO-GH

Šassii: tavavedrustusega sõidukile, tugevdatud šassiiga sõidukile, madaldatud vedrustusega sõidukile

• Šassii: madaldatud vedrustusega sõidukile
• Sõiduki varustusvariant: Eco
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Nimetus: AMORT
• Tootja: MAX

• Telg: tugevdatud käändmik
• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Rõngaskinnituse all, ülemine tihvt
• Tootja: DRIVE

Šassii: tavavedrustusega sõidukile, tugevdatud šassiiga sõidukile, madaldatud vedrustusega sõidukile

• Installatsiooni pool: Esisild
• Šassii: tugevdatud šassiiga sõidukile
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Tihvti all
• Amort-süsteem: kaks toru
• Korpuse läbimõõt klemmide piirkonnas [mm]: 55
• Tootja: DENCKERMANN AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Replace in pairs only:
• Nimetus: AMORT
• Tootja: MEY

• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Korpuseläbimõõt (mm): 55
• Tootja: OYODO

• Installatsiooni pool: Esisild
• Šassii: tugevdatud šassiiga sõidukile
• Amort-Ehitusliik: Vedruamort
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt
• Läbimõõt [mm]: 55
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Length [mm]: 475
• Length 2 [mm]: 302
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 45
• Diameter 2 [mm]: 30
• Spring Type: for vehicles with coil spring suspension
• Tootja: MAGNETI MARELLI

• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Läbimõõt 1/Läbimõõt 2 (mm): 25/55
• soovitava lisavarustuse artiklinumber: SMA0148
• Amort-kinnitusliik: ülemine tihvt
• Tootja: ASHIKA

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Tootja: JP GROUP
• Lisainfo: Shock Absorber

Šassii: tavavedrustusega sõidukile, tugevdatud šassiiga sõidukile

• Installatsiooni pool: Esisild
• Šassii: madaldatud vedrustusega sõidukile
• Sõiduki varustusvariant: Eco
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Korpuseläbimõõt (mm): 55
• Amort-kinnitusliik: Tihvti all
• Amort-süsteem: kaks toru
• Tootja: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Tagasild
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Weight [kg]: 1.8
• Bore Diameter [mm]: 25
• Length 1 [mm]: 314
• Length 2 [mm]: 452
• Piston Rod Diameter [mm]: 12.4
• Article number of recommended accessories: PK448
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Tootja: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Läbimõõt 1/Läbimõõt 2 (mm): 25/55
• soovitava lisavarustuse artiklinumber: SMJ0148
• Amort-kinnitusliik: ülemine tihvt
• Tootja: JAPKO
• Lisainfo: MJ00031 JAPKO

• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Esisild
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Plaadi all, ülemine tihvt
• Amort-süsteem: kaks toru
• Kvaliteediklass: PJ
• Nimetus: Gas shock absorber

Šassii: madaldatud vedrustusega sõidukile, tugevdatud šassiiga sõidukile

• Telg: tugevdatud käändmik
• Kandevõime: kõrgendtud kandevõime jaoks
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Nimetus: AMORT
• Tootja: KYB

Šassii: tavavedrustusega sõidukile, tugevdatud šassiiga sõidukile, madaldatud vedrustusega sõidukile

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Diameter 1/Diameter 2 [mm]: 25/55
• Article number of recommended accessories: SM0148
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: JPA

• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt
• Läbimõõt [mm]: 25, 54
• Tootja: KAVO

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 100 640 0007, 100 412 2039/S, 100 412 2039
• Replace in pairs only:
• Nimetus: AMORT
• Tootja: MEY

Šassii: tavavedrustusega sõidukile, tugevdatud šassiiga sõidukile

• Installatsiooni pool: Esisild
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4
• Bore Diameter [mm]: 32
• Observe technical data:
• Length 1 [mm]: 391
• Length 2 [mm]: 553
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK194, PK163
• Packaging length [cm]: 51.5
• Packaging width [cm]: 16.2
• Packaging height [cm]: 16.2
• Housing diameter in clamping area [mm]: 55
• Tootja: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Telg: tugevdatud käändmik
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 55
• Piston Rod Diameter [mm]: 25
• Nimetus: AMORT
• Tootja: KYB
• Lisainfo: KYB335808

Šassii: tavavedrustusega sõidukile, tugevdatud šassiiga sõidukile, madaldatud vedrustusega sõidukile Technical Information: Please refer to the technical drawing in "Documents"

• Installatsiooni pool: Tagasild
• Šassii: tugevdatud šassiiga sõidukile
• OE-numbri kontrollimine:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SE30/12X158A
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Nimetus: AMORT
• Tootja: SAA
• Lisainfo: 313 320

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• max. length [mm]: 562
• min. length [mm]: 390
• Standpipe Diameter [mm]: 55
• Piston Rod Diameter [mm]: 25
• Piston Rod Thread: M14X150
• Nimetus: SN SA65443.21
• Tootja: SNR

• Installatsiooni pool: Esisild
• Šassii: madaldatud vedrustusega sõidukile
• Sõiduki varustusvariant: Eco
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X157A
• Housing Diameter [mm]: 55
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: SAA

• Installatsiooni pool: Esisild
• Šassii: tavavedrustusega sõidukile
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X164A
• Housing Diameter [mm]: 55
• Shock Absorber Mounting Type: Top pin
• Nimetus: Amort
• Tootja: SAA

• Installatsiooni pool: Esisild
• Šassii: madaldatud vedrustusega sõidukile
• ei ole sõiduki varustusvariandi jaoks: Eco
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X157A
• Housing Diameter [mm]: 55
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: SAA

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Nimetus: AMORT
• Tootja: BIL
• Kvaliteediklass: Q

Šassii: madaldatud vedrustusega sõidukile, tugevdatud šassiiga sõidukile Lisainfo: "Tootja: BILSTEIN
VW TIGUAN 07-
(kvaliteediklass: Q)"