Tootekategooriad
Filter Pidurid Šassii Roolimine Jahutus/kliima Elektrisüsteem Lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütusesüsteemi seadmed Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)

- Installatsiooni pool: ees
- Sõidukivarustus: Kliimaseadmega sõidukile
- Värv: must
- Pistikkontaktide arv: 2
-
Tootja: JP GROUP A/
S -
Lisainfo: Sensor,
exterior temperature

-
Supplementary Article/Info 2: without sensor,
without cable, with a plug - Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Fitting Position: Front
-
Supplementary Article/Info 2: with plug,
without cable - Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Supplementary Article/Info 2: with plug
- Conductor Number: 2
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Fitting Position: Front
- Colour: black
- Vehicle Equipment: for vehicles with air conditioning
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Connector Shape: D Shape
-
Fabrication Number: ECT-
AU- 001 - Tootja: NTY
-
Nimetus: NTY ECT-
AU- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Ühenduste arv: 2
- Materjal: Plastik
-
Kaal (kg): 0,
01 - Tootja: FEBI
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- General Information: temperature sensor
- Tootja: VIKA

- Installatsiooni pool: esisild paremal
- Anduritüüp: Aktiivne andur
- kasutatud klemmide arv: 2
-
Nimetus: DE SS21505-
12B1 - Tootja: DELPHI

- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: without cable
- Number of pins: 2
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

-
Supplementary Article/Info 2: with plug,
without cable - for OE number: 4D0971993
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Fitting Position: Front Axle Left
- Number of pins: 2
- Supplementary Article/Info 2: without cable
-
paired article number: hca-
vw- 013 -
Fabrication Number: HCA-
VW- 012 - Tootja: NTY
-
Nimetus: NTY HCA-
VW- 012
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Number of pins: 2
-
Supplementary Article/Info 2: without sensor,
with plug, without cable - Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: without cable
- Number of pins: 2
-
paired article number: hca-
vw- 012 -
Fabrication Number: HCA-
VW- 013 - Tootja: NTY
-
Nimetus: NTY HCA-
VW- 013
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

-
Fitting Position: Front Axle Left,
Rear Axle Left - Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Number of pins: 2
-
paired article number: hca-
vw- 029 -
Fabrication Number: HCA-
VW- 028 - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

-
Fitting Position: Behind the radiator,
Fuel pump to filter -
Thread Size: M12x1,
5 mm - Sensor Type: NTC Sensor
- Number of pins: 2
- Connector Shape: oval
- Guarantee: 3 years guarantee
- Socket colour: black
- Weight [kg]: 0.01
- Always compare old and new part (in particular OE No.):
- Nimetus: CE 17SKV673
- Tootja: ESEN SKV

- Ühenduste arv: 2
- Värv: must
-
Kaal (kg): 0,
003 - Tootja: FEBI
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Installatsiooni pool: esisild vasakul
- OE-numbri jaoks: 7H0927803
- Pistikkontaktide arv: 2
- Kinnitusaukude hulk: 1
- Tootja: MAGNETI MARELLI
- Nimetus: MM MWSS027

- Installatsiooni pool: esisild paremal
- OE-numbri jaoks: 7H0927804
- Pistikkontaktide arv: 2
- Kinnitusaukude hulk: 1
- Tootja: MAGNETI MARELLI
- Nimetus: MM MWSS028

-
Supplementary Article/Info 2: with plug,
with cable - for OE number: 4D0971993
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Ühenduste arv: 2
- Värv: must
-
Kaal (kg): 0,
003 - Nimetus: SW 33 10 2105
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Installatsiooni pool: Tagasild
- OE-numbri jaoks: 2K0927807
- Pistikkontaktide arv: 2
- Kinnitusaukude hulk: 1
- Tootja: MAGNETI MARELLI
- Nimetus: MM MWSS077
- Lisainfo: MM MWSS077

- vajaminev tükihulk: 2
-
PR-numbri jaoks: 1BA,
2MH, 2MK, 7X0, 7X1 - Installatsiooni pool: Tagasild
- Supplementary Article/Info 2: without cable
- Tootja: DENCKERMANN FILTRY

- Installatsiooni pool: Tagasild
- OE-numbri jaoks: WHT003864A
- Nimetus: MM MWSS141
- Tootja: MAGNETI MARELLI

- Length [mm]: 66
- Sensor Type: Active sensor
- paired article number: FT80422
- Fitting Position: Front Axle Left
- Tootja: FAST

- Installatsiooni pool: esisild vasakul
- Supplementary Article/Info 2: without cable
- Tootja: DENCKERMANN FILTRY

-
Fitting Position: Front Axle,
Front Axle Right -
paired article number: GH-
709912V -
Tootja: AUTO-
GH

-
Fitting Position: Front Axle,
Front Axle Left -
paired article number: GH-
709912H -
Tootja: AUTO-
GH

- Installatsiooni pool: esisild paremal
- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 2
-
Lisainfo: ABS sensor,
front, right

- Installatsiooni pool: esisild vasakul
- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 2
-
Lisainfo: ABS sensor,
front, left

- Fitting Position: Right Rear
- General Information: ABS speed sensor; rear right
- Tootja: VIKA

- Fitting Position: Rear Axle
- Length [mm]: 38
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Colour: black
- Always compare old and new part (in particular OE No.):
- Tootja: SKV GERMANY

- Weight [kg]: 0.12
- Number of connectors: 2
- Fitting Position: Front Axle Right
- General Information: ABS speed sensor; front right
- Tootja: VIKA

- Installatsiooni pool: esisild paremal
- Supplementary Article/Info 2: without cable
- Tootja: DENCKERMANN FILTRY

- Mootorikood: DFSB
-
Thread Size: M12x1,
5 - Spanner Size: 17
- Nimetus: EP 1.830.378
- Tootja: EPS

-
Fitting Position: Front Axle Right,
Rear Axle Right - Number of pins: 2
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Mootorikood: DFSB
-
Keermemõõt: M12x1,
5 - Võtmekaugus: 17
- Tootja: FACET

- vajaminev tükihulk: 2
-
PR-numbri jaoks: 1BA,
2MH, 2MK, 7X0, 7X1 - Fitting Position: Rear Axle
- Length [mm]: 75
- Sensor Type: Active sensor
- Tootja: KAVO PARTS

- Weight [kg]: 0.12
- Number of connectors: 2
- Fitting Position: Front Axle Left
- General Information: ABS speed sensor; front left
- Tootja: VIKA

- Length [mm]: 66
- Sensor Type: Active sensor
- paired article number: FT80421
- Fitting Position: Front Axle Right
- Tootja: FAST

- Installatsiooni pool: Tagasild paremal
- Anduritüüp: Aktiivne andur
- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: ilma kaablita
- Tootja: JP GROUP
-
Lisainfo: ABS sensor,
front/ rear, right

- Installatsiooni pool: Tagasild vasakul
- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: ilma kaablita
- Tootja: JP GROUP
-
Lisainfo: ABS sensor,
front/ rear, left

- Installatsiooni pool: Tagasild
- Piirangutega toode/piirangu info 2: ilma kaablita
- Tootja: DELLO AUTOMEGA

- vajaminev tükihulk: 1
- Installatsiooni pool: esisild paremal
- Supplementary Article/Info 2: without cable
- Colour: black
- Tootja: BREMI

- vajaminev tükihulk: 1
- Installatsiooni pool: esisild vasakul
- Supplementary Article/Info 2: without cable
- Colour: black
- Tootja: BREMI

- Connector Shape: D Shape
- Supplementary Article/Info 2: without cable
- Colour: black
- Number of pins: 2
- Fitting Position: Front
- Vehicle Equipment: for vehicles with air conditioning
- Power [W]: 0.06
- Tootja: METZGER

- vajaminev tükihulk: 2
-
PR-numbri jaoks: 1BH,
1BJ, 7X0, 7X1 - Installatsiooni pool: Tagasild
- Supplementary Article/Info 2: without cable
- Tootja: DENCKERMANN FILTRY

- Läbimõõt [mm]: 25
- Kõrgus (mm): 52
- Ühenduste arv: 2
- Tootja: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Pistikkontaktide arv: 2
- Pistikukatte kuju: ristkülik
- Piirangutega toode/piirangu info 2: ilma kaablita
- Sõidukivarustus: Kliimaautomaatikaga sõidukile
- OE-numbri jaoks: 1K0907543G
- Tootja: MEAT&DORIA

- Mootorikood: DFSB
- Värv: must
- Pistikute teostus: Kruvikontakt
- Nimetus: EP 1.830.377
- Tootja: EPS

- Mootorikood: DFSB
- Värv: must
- Pistikute teostus: Kruvikontakt
- Tootja: FACET

-
Fitting Position: Front Axle Left,
Rear Axle Left - Number of pins: 2
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Number of pins: 2
- for OE number: 1K0 907 543 G
- Width [mm]: 20
- Length [mm]: 50
- Guarantee: 3 years guarantee
- Tootja: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

-
PR-numbri jaoks: 1BH,
1BJ, 7X0, 7X1, 7X5, 7X6, 7X7, 7X9 - vajaminev tükihulk: 2
- Plokieraldus:
- Fitting Position: Rear Axle
- Length [mm]: 75
- Sensor Type: Active sensor
- Tootja: KAVO PARTS

-
Installatsiooni pool: Tagasild vasakul,
Tagasild - vajaminev tükihulk: 1
- Kogupikkus [mm]: 66
- Anduritüüp: Aktiivne andur
- Pistikkontaktide arv: 2
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 6PU012679931
- Tootja: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

-
Installatsiooni pool: Tagasild paremal,
Tagasild - vajaminev tükihulk: 1
- Kogupikkus [mm]: 66
- Anduritüüp: Aktiivne andur
- Pistikkontaktide arv: 2
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 6PU012679941
- Tootja: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- Keermemõõt: M 12x1.5
- Pistikkontaktide arv: 2
- Korpusevärv: pruun
- Tootja: FAE

- Fitting Position: Front
- Sensor Type: Ultrasonic Sensor
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Installatsiooni pool: esisild paremal
- Pistikkontaktide arv: 2
-
Pistikukatte kuju: D-
kuju - Pikkus (mm): 66
- Piirangutega toode/piirangu info 2: ilma kaablita
- Anduritüüp: Hallsensor
-
Installatsiooni sügavus (mm): 27,
5 - OE-numbri jaoks: 7H0927804
- Tootja: MEAT & DORIA

- Installatsiooni pool: esisild vasakul
- Pistikkontaktide arv: 2
- Anduritüüp: Aktiivne andur
- Piirangutega toode/piirangu info 2: ilma kaablita
- Installatsiooni sügavus (mm): 28
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Tootja: AUTOFREN SEINSA
- Nimetus: SE DS0001

- Fitting Position: Right Front
- General Information: Wheel speed sensor; front right
- Tootja: BORSEHUNG

- Fitting Position: Left Front
- General Information: Wheel speed sensor; front left
- Tootja: BORSEHUNG

- for OE number: 04E 919 501 B
- Length [mm]: 40
- Guarantee: 3 years guarantee
- Number of pins: 2
- Voltage [V]: 12
- Tootja: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

-
Installatsiooni pool: vasakul,
piki, paremal, sees, väljas - Sõidukivarustus: sõidukitele tahavaate kaamera süsteemiga
-
Fitting Position: Front,
Rear - Voltage [V]: 12
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.02
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Nimetus: CE 28SKV015
- Tootja: ESEN SKV

- Pikkus (mm): 36
- Laius (mm): 17
- Kõrgus (mm): 13
- Sõidukivarustus: Kliimaseadmega sõidukile
- Pistikkontaktide arv: 2
- Tootja: VEMO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Installatsiooni pool: esisild paremal
- Pistikkontaktide arv: 2
- Anduritüüp: Aktiivne andur
- Piirangutega toode/piirangu info 2: ilma kaablita
- Installatsiooni sügavus (mm): 28
- OE-numbri jaoks: 7H0927804
- Tootja: AUTOFREN SEINSA
- Nimetus: SE DS0002

- Weight [kg]: 0.02
- Width [mm]: 31
- Number of connectors: 3
- Length [mm]: 69
- Colour: black
- Supplementary Article/Info 2: with screw
- Required quantity: 1
- General Information: impulse sender; crackshaft; black
- Tootja: VIKA

- Pistikkontaktide arv: 3
-
Nimetus: DE SS12308-
12B1 - Tootja: DELPHI

- Length [mm]: 66
- Sensor Type: Active sensor
- paired article number: FT80423
-
Fitting Position: Rear Axle Right,
Front Axle Right - Tootja: FAST

- Weight [kg]: 0.02
- Number of connectors: 3
- Supplementary Article/Info 2: with screw
- Required quantity: 1
- General Information: impulse sender; crackshaft
- Tootja: VIKA

- Installatsiooni pool: taga
- Värv: must
- Piirangutega toode/piirangu info: koos tihendiga
- Nimetus: MM SDP107
- Tootja: MAGNETI MARELLI

- Installatsiooni pool: esisild vasakul
-
paaris tootenumbrid: 06-
S055 - Anduritüüp: Aktiivne andur
-
Installatsiooni sügavus (mm): 27,
7 - Tootja: OPTIMAL ZAWIESZENIE

- Mootorikood: DFSB
-
Keermemõõt: M12x1,
5 - Võtmekaugus: 16
- Tootja: FACET

-
Anduritüüp: NTC-
andur - Montaaživiis: Kruviühendus
-
Pistikukatte kuju: D-
kuju - Pistikkontaktide arv: 2
- Pistiku värv: must
- OE-numbri jaoks: 04E919501B
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Tootja: NRF

- Fitting Position: Rear
- General Information: ABS speed sensor; rear
- Tootja: VIKA

- General Information: impulse sender; crackshaft
- Tootja: VIKA

- Number of pins: 2
- Socket Width [mm]: 1.5
- Plug Type: Female
- Number of circuits: 2
-
Material: CuSn
(copper- tin) - Cable Length [mm]: 500
- Cable cross-section from [mm²]: 0.75
- Cable cross-section to [mm²]: 0.75
- Cable insulation material: Silicone
- Supplementary Article/Supplementary Info: with shrink squeeze connector
- Tootja: METZGER
Installatsiooni pool: esisild vasakul, esisild paremal, Tagasild vasakul, Tagasild paremal

-
Installatsiooni pool: Tagasild,
Tagasild paremal, Tagasild vasakul - Pikkus (mm): 75
- Pistikkontaktide arv: 2
-
Pistikukatte kuju: D-
kuju - Piirangutega toode/piirangu info 2: ilma kaablita
- Anduritüüp: Hallsensor
-
Installatsiooni sügavus (mm): 37,
8 - OE-numbri jaoks: 2K0927807
- Tootja: MEAT&DORIA

- Fitting Position: Left
- General Information: ABS speed sensor; left
- Tootja: VIKA

-
Fabrication Number: ECP-
VW- 009 - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Installatsiooni pool: Tagasild vasakul
- Overall Length [mm]: 66
- Length [mm]: 28
- Sensor Type: Active sensor
- Socket colour: grey
- paired article number: 30146
- Weight [kg]: 0.09
- Tootja: ABS

- Weight [kg]: 0.02
- Width [mm]: 31
- Number of connectors: 3
- Length [mm]: 69
- Colour: grey
- Supplementary Article/Info 2: with screw
- Required quantity: 1
- General Information: impulse sender; crackshaft
- Tootja: VIKA

- Pistikkontaktide arv: 2
- Pistikukatte kuju: ovaalne
- Pistiku värv: must
-
Keermemõõt: M12x1,
5 -
Anduritüüp: NTC-
andur - Võtmekaugus: 17
- OE-numbri jaoks: 04L919824C
- Tootja: MEAT & DORIA

- Mootorikood: DFSB
- Installatsiooni pool: esisild vasakul
- vajaminev tükihulk: 1
-
Pikkus, mõõteandur [mm]: 27,
5 - Tootja: FACET

- Pistikkontaktide arv: 3
- Tootja: DELPHI
- Nimetus: DE SS11480

- Length [mm]: 66
- Sensor Type: Active sensor
- paired article number: FT80424
-
Fitting Position: Rear Axle Right,
Front Axle Right - Tootja: FAST

- Ühenduste arv: 2
- Värv: must
-
Kaal (kg): 0,
013 - OE-numbri jaoks: 04E 919 501 B
- Tootja: FEBI
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

-
Fitting Position: Front,
Rear - Tootja: FAST

- Mootorikood: DFSB
- Installatsiooni pool: esisild paremal
- vajaminev tükihulk: 1
-
Pikkus, mõõteandur [mm]: 27,
5 - Tootja: FACET

- Fitting Position: Rear
- General Information: Wheel speed sensor; rear
- Tootja: BORSEHUNG

- Fitting Position: Right Rear
- General Information: Wheel speed sensor; rear right
- Tootja: BORSEHUNG

- vajaminev tükihulk: 1
- Installatsiooni pool: Tagasild vasakul
- Supplementary Article/Info 2: without cable
- Colour: grey
- Tootja: BREMI

- vajaminev tükihulk: 1
- Installatsiooni pool: Tagasild paremal
- Supplementary Article/Info 2: without cable
- Colour: grey
- Tootja: BREMI

-
Fitting Position: Front,
Rear - Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Always compare old and new part (in particular OE No.):
- Nimetus: CE 28SKV096
- Tootja: ESEN SKV

- vajaminev tükihulk: 2
-
PR-numbri jaoks: 1BA,
2MH, 2MK, 7X0, 7X1 - Installatsiooni pool: Tagasild
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Nominaalpinge (V): 12
- Värv: must
-
Anduritüüp: Hallsensor,
Aktiivne andur - Pistikkontaktide arv: 2
- Ühenduste arv: 2
- Piirangutega toode/piirangu info 2: ilma kaablita
-
Pistikukatte kuju: D-
kuju - Tootja: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Pistikkontaktide arv: 3
- Anduritüüp: Hallsensor
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 6PU358380651
- Tootja: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- Anduritüüp: Aktiivne andur
- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: ilma kaablita
- Vastab originaalosa värvile: must
- Installatsiooni pool: esisild paremal
- Tootja: FAE

- Installatsiooni pool: esisild vasakul
- Anduritüüp: Aktiivne andur
- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: ilma kaablita
- Vastab originaalosa värvile: must
- Tootja: FAE ELEKTRYKA

- Installatsiooni pool: esisild vasakul
-
PR-numbri jaoks: 1ZA,
1ZE - Overall Length [mm]: 66
- Length [mm]: 28
- Sensor Type: Active sensor
- Socket colour: black
- paired article number: 30018
- Weight [kg]: 0.1
- Tootja: ABS

- Mootorikood: DFSB
- Käigukasti liik: Käigukast
- Tootja: FACET

- Installatsiooni pool: esisild vasakul
- Hulk: 1
- Anduritüüp: Aktiivne andur
- kasutatud klemmide arv: 2
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE SS20035

- Installatsiooni pool: esisild paremal
- Hulk: 1
- Anduritüüp: Aktiivne andur
- kasutatud klemmide arv: 2
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE SS20036
- Kvaliteediklass: PJ

-
Installatsiooni pool: Tagasild vasakul,
esisild vasakul - Pistikkontaktide arv: 2
-
Pistikukatte kuju: D-
kuju - Piirangutega toode/piirangu info 2: ilma kaablita
- Anduritüüp: Hallsensor
-
Installatsiooni sügavus (mm): 27,
5 - Kvaliteet: OE EQUIVALENT
- OE-numbri jaoks: 7L0927807B
- Tootja: MEAT & DORIA

- Number of pins: 3
-
Fabrication Number: ECS-
VW- 000 - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Installatsiooni pool: esisild paremal
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Nominaalpinge (V): 12
-
Kõrgus (mm): 27,
5 - Värv: must
-
Anduritüüp: Hallsensor,
Aktiivne andur - Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: ilma kaablita
-
Pistikukatte kuju: D-
kuju - Kinnitusaukude hulk: 1
- Tootja: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Installatsiooni pool: Tagasild paremal
- Pistikkontaktide arv: 2
- Anduritüüp: Aktiivne andur
- Installatsiooni sügavus (mm): 28
- Piirangutega toode/piirangu info 2: ilma kaablita
- Tootja: AUTOFREN SEINSA
- Nimetus: SE DS0035

- Mootorikood: DFSB
- Käigukasti liik: Käigukast
- Nimetus: EP 1.953.778
- Tootja: EPS

- Ühenduste arv: 3
-
Kaal (kg): 0,
01 - OE-numbri jaoks: 04L 145 049 AF SK
- Nimetus: SW 33 10 8053
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Mootorikood: DFSB
- Käigukasti liik: Käigukast
- Tootja: FACET

- Ehitusaasta kuni: 09.2020
- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 3
- Piirangutega toode/piirangu info 2: ilma kaablita
- Tootja: FAE ELEKTRYKA

- Installatsiooni pool: esisild paremal
- paaris tootenumbrid: 23824
- Ühenduste arv: 2
-
Kaal (kg): 0,
12 - Tootja: FEBI HAMULCE
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Mootorikood: DFSB
- Käigukasti liik: Käigukast
- Tootja: EPS

- Välisläbimõõt [mm]: 12
- Ühenduste arv: 3
-
Kaal (kg): 0,
015 - OE-numbri jaoks: 05E 907 601 D
- Tootja: FEBI
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Tootja: BOSCH

- Installatsiooni pool: esisild vasakul
- paaris tootenumbrid: 23822
- Ühenduste arv: 2
-
Kaal (kg): 0,
12 -
Tootja: FEBI-
UKLAD HAMULCOWY
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Kaablipikkus (mm): 995
- Pistikkontaktide arv: 2
- Installatsiooni pool: Tagasild
- Tootja: KAMOKA

-
Fabrication Number: ECP-
AU- 018 - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Anduritüüp: Hallsensor
- Piirangutega toode/piirangu info 2: ilma kaablita
-
Installatsiooni pool: Tagasild paremal,
Tagasild vasakul - Kvaliteet: OE EQUIVALENT
- OE-numbri jaoks: WHT003864A
- Tootja: MEAT&DORIA

- Mootorikood: DFSB
- Nimetus: EP 1.953.774
- Tootja: EPS

- Mootorikood: DFSB
- Tootja: FACET

- Installatsiooni pool: Tagasild vasakul
- Ehitusaasta kuni: 09.2020
- Anduritüüp: Aktiivne andur
- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: ilma kaablita
-
Pistikukatte kuju: D-
kuju - Tootja: FAE

- General Information: pressure sensor
- Tootja: VIKA

- Installatsiooni pool: esisild vasakul
- paaris tootenumbrid: 32 92 3822
- Ühenduste arv: 2
-
Kaal (kg): 0,
12 - Nimetus: SW 32 92 3824
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Installatsiooni pool: esisild paremal
- paaris tootenumbrid: 32 92 3824
- Ühenduste arv: 2
-
Kaal (kg): 0,
12 - Nimetus: SW 32 92 3822
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Installatsiooni pool: Tagasild
- Anduritüüp: Aktiivne andur
- Pistikkontaktide arv: 2
- Tootja: FAE

- Installatsiooni pool: Tagasild paremal
- Hulk: 1
- Anduritüüp: Aktiivne andur
- kasutatud klemmide arv: 2
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE SS20063

- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Tootja: VDO

- General Information: hall sender camshaft
- Tootja: VIKA

-
Installatsiooni pool: esisild vasakul,
Esisild - vajaminev tükihulk: 1
- Kinnitusaukude hulk: 1
- Kogupikkus [mm]: 66
- Pinge [V]: 12
- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: ilma kaablita
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 6PU012039011
- Tootja: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- vajaminev tükihulk: 1
- Kinnitusaukude hulk: 1
- Kogupikkus [mm]: 66
- Pinge [V]: 12
- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: ilma kaablita
-
Installatsiooni pool: esisild paremal,
Tagasild paremal - Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 6PU012039021
- Tootja: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- Installatsiooni pool: Tagasild vasakul
- Hulk: 1
- Anduritüüp: Aktiivne andur
- kasutatud klemmide arv: 2
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE SS20062

- Fitting Position: Right
- Length [mm]: 28
- Weight [kg]: 0.01
- Socket colour: black
- Colour: black
- Material: Plastic
- Sensor Type: Active sensor
- Number of pins: 2
- Tootja: METALCAUCHO

-
Installatsiooni pool: vasakul,
Tagasild -
Tootja: SNR /
NTN- SNR/ - Nimetus: SN ASB154.30

-
Installatsiooni pool: vasakul,
Tagasild, Esisild - Kaablipikkus (mm): 66
- Nimetus: SN ASB157.01
-
Tootja: NTN-
SNR

- Fuel Mixture Formation: Direct Injection
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.07
- Always compare old and new part (in particular OE No.):
- Tootja: SKV GERMANY
- Nimetus: CE 17SKV409

- Väljalaskesüsteem: enne tahmafiltrit
-
Pistikukatte kuju: D-
kuju - Pistikkontaktide arv: 3
- Surve alates (Pa): −14 000
- Surve (Pa) kuni: 100 000
- Tootja: NRF

- Mootorikood: DFSB
- Värv: hall
- Korpusevärv: must
- Tootja: FACET

Tootja: BOSCH

- Installatsiooni pool: Tagasild paremal
- Overall Length [mm]: 66
- Length [mm]: 28
- Sensor Type: Active sensor
- Socket colour: grey
- paired article number: 30145
- Weight [kg]: 0.09
- Tootja: ABS

- Pistikkontaktide arv: 3
- Surve alates [kPA]: 50
- Tootja: DELPHI ELEKTRONIKA

- Installatsiooni pool: Tagasild paremal
- paaris tootenumbrid: 30 93 2862
- Ühenduste arv: 2
-
Kaal (kg): 0,
01 - Nimetus: SW 30 93 2861
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Mootorikood: DFSB
- Installatsiooni pool: Tagasild vasakul
- vajaminev tükihulk: 1
- Sensor Length [mm]: 27.5
- Nimetus: EP 1.960.172
- Tootja: EPS

- Mootorikood: DFSB
- Installatsiooni pool: Tagasild paremal
- vajaminev tükihulk: 1
-
Pikkus, mõõteandur [mm]: 27,
5 - Tootja: FACET

- Mootorikood: DFSB
- Installatsiooni pool: Tagasild vasakul
- vajaminev tükihulk: 1
-
Pikkus, mõõteandur [mm]: 27,
5 - Tootja: FACET

- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 3
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 6PU013122871
- Tootja: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- General Information: Pressure difference sensor
- Tootja: BORSEHUNG

- Mootorikood: DFSB
- Pressure from [kPA]: 29
- Pressure to [kPA]: 400
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.48
- Nimetus: EP 1.993.327
- Tootja: EPS

- Mootorikood: DFSB
- Surve alates [kPA]: 29
- Surve kuni [kPA]: 400
-
Väljundpinge alates [V]: 0,
25 -
Väljundpinge kuni [V]: 4,
48 - Tootja: FACET

- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Always compare old and new part (in particular OE No.):
- Tootja: SKV

- Mootorikood: DFSB
- Väljalaskesüsteem: enne tahmafiltrit
-
Väljundpinge alates [V]: 0,
5 -
Väljundpinge kuni [V]: 4,
5 - Tootja: FACET

- Weight [kg]: 0.05
- Number of connectors: 3
- Required quantity: 1
- General Information: hall sender camshaft
- Tootja: VIKA

- Montaaživiis: kruvitud
- Piirangutega toode/piirangu info: koos tihenditega
- Pistikkontaktide arv: 3
- Anduritüüp: Impulssandur
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 6PU013122221
- Tootja: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

-
Fabrication Number: EPO-
AU- 006 - Tootja: NTY
-
Nimetus: NTY EPO-
AU- 006
Lisainfo: AUDI A3 1.6TDI 2015-,Q3 2.0TDI 2014-,SEAT ALHAMBRA 2.0TDI 2015-,LEON 1.6TDI,2.0TDI 2012-,SKODA OCTAVIA III 1.6TDI,2.0TDI 2015-,VW GOLF VII 1.6TDI,2.0TDI 2015-,PASSAT B8 1.6TDI,2.0TDI 2014-,TIGUAN 2.0TDI 2007-
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- programmeeritav:
- Värv: hõbedane
- Sagedusala [MHz]: 433
- Materjal: Metall
- Tootja: BOSCH UK£ADY HAMULCOWE
- Nimetus: BS F026C00466

- Installatsiooni pool: Tagasild
- vajaminev tükihulk: 2
-
PR-numbri jaoks: 1BA,
2MH, 2MK, 7X0, 7X1 - Supplementary Article/Info 2: without cable
- MAPP code available:
- Tootja: ATE

- programmeeritav:
- Värv: titaan
- Sagedusala [MHz]: 433
- Materjal: Metall
- Tootja: BOSCH
- Nimetus: BS F026C00467
- Lisainfo: F026C00467 BOSCH

- programmeeritav:
- Värv: must
- Sagedusala [MHz]: 433
- Materjal: Kumm
- Tootja: BOSCH
- Nimetus: BS F026C00469

- programmeeritav:
- Värv: must
- Sagedusala [MHz]: 433
- Materjal: Metall
- Tootja: BOSCH

- Pistikkontaktide arv: 3
- Surve alates [kPA]: 48
-
Nimetus: DE PS20074-
12B1 - Tootja: DELPHI

- Weight [kg]: 0.05
-
Test Mark: CE,
FCC, IC - Frequency Range [MHz]: 433
- Valve colour: silver
- Housing Colour: grey
- Mounting Type: Bolted
- Installation Information: TPMS sensor needs to be programmed before use.
- Tootja: HUF

- Pistikkontaktide arv: 3
- Surve alates (Pa): 48 500
- Surve (Pa) kuni: 400 000
- Tootja: FAE

- Installatsiooni pool: esisild paremal
- Anduritüüp: Aktiivne andur
- Piirangutega toode/piirangu info 2: ilma kaablita
- pikkus üle kõige (mm): 66
- temperatuurivahemik alates [°C]: −40
- Temperatuurivahemik kuni [°C]: 150
- Tootja: BOSCH
- Nimetus: BS 0986594505

- Weight [kg]: 0.05
-
Test Mark: CE,
FCC, IC - Frequency Range [MHz]: 433
- Valve colour: silver
- Housing Colour: black
- Mounting Type: Bolted
- Installation Information: TPMS sensor needs to be programmed before use.
- Tootja: HUF

- vajaminev tükihulk: 2
-
Installatsiooni pool: kahepoolne,
väljas, ees, taga - Sõidukivarustus: sõidukitele poolautomaatse parkimisabi süsteemiga
-
PR-numbri jaoks: 7X5,
7X6 - Pistikkontaktide arv: 3
- keem.omadus: värvitav
- Montaaživiis: Pealis
- Pistiku värv: beež
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Anduritüüp: Ultraheliandur
- Nimetus: HE 6PX358270471
- Tootja: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- Installatsiooni pool: esisild vasakul
- Anduritüüp: Aktiivne andur
- Piirangutega toode/piirangu info 2: ilma kaablita
- pikkus üle kõige (mm): 66
- temperatuurivahemik alates [°C]: −40
- Temperatuurivahemik kuni [°C]: 150
- Tootja: BOSCH
- Nimetus: BS 0986594504

- Pistikkontaktide arv: 3
-
Pistikukatte kuju: D-
kuju - Ühenduste arv: 1
- OE-numbri jaoks: 04L906051B
- Tootja: MEAT&DORIA

- Installatsiooni pool: esisild paremal
- Anduritüüp: Aktiivne andur
- Piirangutega toode/piirangu info: koos lisadega
- Pikkus (mm): 66
- paaris tootenumbrid: GBS2515
-
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Tootja: TRW

- Installatsiooni pool: esisild vasakul
- Anduritüüp: Aktiivne andur
- Piirangutega toode/piirangu info: koos lisadega
- Pikkus (mm): 66
- paaris tootenumbrid: GBS2516
-
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Tootja: TRW

- Pistikkontaktide arv: 3
-
Pistikukatte kuju: D-
kuju - Ühenduste arv: 2
- Kvaliteet: OE EQUIVALENT
- OE-numbri jaoks: 03L906051B
- Tootja: MEAT & DORIA

- Number of pins: 3
- Connector Shape: D Shape
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

Tootja: NRF KLIMATYZACJA

-
Fabrication Number: EPO-
AU- 013 - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- vajaminev tükihulk: 8
-
Installatsiooni pool: sees,
keskel vasakul, keskel paremal, ees, taga - Pistikkontaktide arv: 3
- keem.omadus: ülevärvitav
- Montaaživiis: pistetud
- Pistiku värv: must
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Tootja: HELLA ELEKTRYKA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- Installatsiooni pool: Tagasild vasakul
- Anduritüüp: Aktiivne andur
- Piirangutega toode/piirangu info 2: ilma kaablita
- pikkus üle kõige (mm): 66
- temperatuurivahemik alates [°C]: −40
- Temperatuurivahemik kuni [°C]: 150
- Tootja: BOSCH

- Housing Type: with housing
- Housing material: Plastic
- Voltage [V]: 12
- Length [mm]: 110
-
Fabrication Number: EPP-
AU- 016 - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Kütusesüsteemi seadmed: Common Rail
- Surve (bar) kuni: 2 200
- Pistikkontaktide arv: 3
- Pistiku värv: must
- Tootja: FAE ELEKTRYKA

- Installatsiooni pool: Tagasild paremal
- Anduritüüp: Aktiivne andur
- Piirangutega toode/piirangu info 2: ilma kaablita
- pikkus üle kõige (mm): 66
- temperatuurivahemik alates [°C]: −40
- Temperatuurivahemik kuni [°C]: 150
- Tootja: BOSCH

- Installatsiooni pool: ees
- Anduritüüp: Ultraheliandur
- Pistikkontaktide arv: 3
- Pistikukatte kuju: ovaalne
- OE-numbri jaoks: 5Q0919275
- Tootja: MEAT&DORIA

- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.24
- Always compare old and new part (in particular OE No.):
- Nimetus: CE 07SKV159
- Tootja: ESEN SKV

- Number of pins: 2
-
Fabrication Number: EGT-
VW- 084 - Cable Length [mm]: 530
- Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- General Information: oil level sensor
- Tootja: VIKA

- vajaminev tükihulk: 2
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1BH,
1BJ, 7X0, 7X1 - Supplementary Article/Info 2: without cable
- MAPP code available:
- Tootja: ATE

- Väljalaskesüsteem: enne tahmafiltrit
- Pistikkontaktide arv: 3
- Avamisrõhk [kPa]: 14
- Tootja: DELPHI ELEKTRONIKA

- Colour: black
- Number of pins: 3
- Tootja: ERA

- Fitting Position: before exhaust turbocharger
- Cable Length [mm]: 600
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.09
- Always compare old and new part (in particular OE No.):
- Nimetus: CE 30SKV444
- Tootja: ESEN SKV

- Weight [kg]: 0.05
-
Test Mark: CE,
FCC, IC - Colour: Orange
-
Vehicle Equipment: for vehicles with tyre-
pressure monitoring system - Frequency Range [MHz]: 433
- Valve colour: silver
- Mounting Type: Bolted
- Installation Information: TPMS sensor needs to be programmed before use.
- Tootja: HUF
- Lisainfo: UVS4050

- Väljalaskesüsteem: enne tahmafiltrit
- Montaaživiis: kruvitud
- Pistikkontaktide arv: 3
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 6PP009409161
- Tootja: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- for OE number: 04L 907 601
- Width [mm]: 67
- Height [mm]: 68
- Length [mm]: 40
- Guarantee: 3 years guarantee
- Voltage [V]: 12
- Tootja: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

- Supplementary Article/Info 2: without cable
- Fitting Depth [mm]: 24
- Number of pins: 3
- Version: IAM
- Tootja: METZGER

- Montaaživiis: kruvitud
- Pistikkontaktide arv: 3
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 6PP009409591
- Tootja: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- OE-numbri jaoks: 03L 906 461 A
- Tootja: KAMOKA

- Pistikkontaktide arv: 3
-
Pistikukatte kuju: D-
kuju - Ühenduste arv: 2
- OE-numbri jaoks: 03L906051D
- Tootja: MEAT&DORIA

- Mootorikood: DFSB
- Tootja: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Mootorikood: DFSB
- Anduritüüp: Rõhuerinevuse andur
- Väljundpinge kuni [V]: 5
- Mõõtepiirkond alates [kPa]: −14
- Mõõtepiirkond kuni [kPa]: 100
- Pistikkontaktide arv: 3
- Kinnitusaukude hulk: 1
- Piirangutega toode/piirangu info: ilma lisavarustuseta
- Installatsiooni pool: Tahmaosakeste filter
- Tootja: PIERBURG

-
Installatsiooni pool: ees,
taga - Sensor Type: Ultrasonic Sensor
- Colour: black
- Surface: primed
- Number of pins: 3
- Shape: angled
- Chemical Properties: Paintable
- Tootja: AIC
Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

- Ühenduste arv: 3
- Materjal: Plastik
- Anduritüüp: Rõhuerinevuse andur
-
Kaal (kg): 0,
03 - OE-numbri jaoks: 03L 906 051 D
- Nimetus: SW 30 10 0853
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Spanner Size: 17
- Number of pins: 2
-
Fabrication Number: EGT-
SK- 002 - Cable Length [mm]: 730
- Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Installatsiooni pool: katalüsaatori ees
- Piirangutega toode/piirangu info: sünteetilise määrdega
- Tootja: NRF

- Ühenduste arv: 3
- Materjal: Plastik
- Anduritüüp: Rõhuerinevuse andur
-
Kaal (kg): 0,
03 - OE-numbri jaoks: 03L 906 051 D
- Tootja: FEBI
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- for OE number: 04L 906 088 DD
-
Cable Length [mm]: 1,
040 - Number of pins: 2
- Connector Shape: D Shape
- Guarantee: 3 years guarantee
- Exhaust System: before soot particulate filter
- Socket colour: brown
- Weight [kg]: 0.1
- Shape: L Shape
- Always compare old and new part (in particular OE No.):
- Tootja: SKV GERMANY

- Piirangutega toode/piirangu info 2: koos kaabliga
- Kaablipikkus (mm): 650
- pikkus üle kõige (mm): 760
- Pistikkontaktide arv: 2
- Pistikukatte kuju: ovaalne
- Pistiku värv: must
-
Keermemõõt: M14 x 1,
5 - Võtmekaugus: 17
-
Anduritüüp: NTC-
andur - Tootja: VALEO

- Piirangutega toode/piirangu info: koos tihendiga
- Pistikkontaktide arv: 3
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 6PR013680021
- Tootja: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- Mootorikood: DFSB
- Korpusevärv: must
-
Pikkus, mõõteandur [mm]: 66,
9 - Tootja: FACET

Tootja: BOSCH

Tootja: BOSCH

- Fitting Position: before soot particulate filter
-
Cable Length [mm]: 1,
040 - Number of pins: 2
- Connector Shape: D Shape
- Socket colour: brown
- Tootja: FAST

- Väljalaskesüsteem: pärast tahmafiltrit
- Tootja: JAPKO

- Number of pins: 3
- Connection Diameter (pressure side) [mm]: 8
- Connection Diameter (suction side) [mm]: 8
- Number of connectors: 2
- Tootja: METZGER

-
Fabrication Number: EGT-
AU- 043 - Cable Length [mm]: 650
- Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- General Information: Exhaust Gas Temperature Sensor
- Tootja: VIKA

- Väljalaskesüsteem: enne tahmafiltrit
- Kaablipikkus (mm): 1 050
- Pistikkontaktide arv: 2
-
Nimetus: DE TS30319-
12B1 - Tootja: DELPHI

- Mootorikood: DFSB
- Korpusetüüp: koos korpusega
- Length [mm]: 110
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 80
- Nimetus: EP 1.991.446
- Tootja: EPS

- Voltage [V]: 12
- Vehicle Equipment: for vehicles with air conditioning
- Colour: black
- Material: Plastic
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

-
Lambda andur: Sond,
Lineaarne lambda andur, soojendatud - Installatsiooni pool: katalüsaatori ees
- Kaablipikkus (mm): 650
-
Nimetus: DE ES21322-
12B1 - Tootja: DELPHI

- Voltage [V]: 12
- Cable Length [mm]: 735
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.06
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Tootja: SKV GERMANY
- Nimetus: CE 30SKV228

- Lambda andur: Sond
- Installatsiooni pool: katalüsaatori ees
- Ülekandeliinide arv: 3
- pikkus üle kõige (mm): 650
- Tootja: BOSCH

-
vajaminev tükihulk: 2,
8 - Sõidukivarustus: sõidukitele poolautomaatse parkimisabi süsteemiga
-
PR-numbri jaoks: 7X5,
7X6 - Anduritüüp: Ultraheliandur
- keem.omadus: värvitav
- Pikkus (mm): 41
- Laius (mm): 23
-
Kõrgus (mm): 28,
7 - Pistikkontaktide arv: 3
-
Läbimõõt [mm]: 15,
5 - Tootja: VALEO
- Nimetus: VA 890019
- Lisainfo: 890019 VALEO
Installatsiooni pool: väljas, sees, kahepoolne, keskel vasakul, keskel paremal, ees, taga

- vajaminev tükihulk: 2
- Sõidukivarustus: sõidukitele poolautomaatse parkimisabi süsteemiga
-
PR-numbri jaoks: 7X5,
7X6 - Anduritüüp: Ultraheliandur
- keem.omadus: värvitav
- Pikkus (mm): 41
- Laius (mm): 23
-
Kõrgus (mm): 28,
7 - Pistikkontaktide arv: 3
-
Läbimõõt [mm]: 15,
5 - Nimetus: VA 890010
- Tootja: VALEO
Installatsiooni pool: väljas, kahepoolne, ees, taga, küljepoolne sisseehitus

- Mootorikood: DFSB
-
Installatsiooni pool: ees,
katalüsaatori ees -
Lambda andur: Sond,
Keere eelmääritud - Pikkus (mm): 570
- Pistikkontaktide arv: 5
-
Pistikukatte kuju: D-
kuju - Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
- Tootja: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Väljalaskesüsteem: pärast tahmafiltrit
- Kaablipikkus (mm): 710
- Pistikkontaktide arv: 2
-
Nimetus: DE TS30341-
12B1 - Tootja: DELPHI

-
Oxygen Sensor: Switching-
type Oxygen Sensor - Voltage [V]: 12
- Colour: red
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Tootja: SKV GERMANY
- Nimetus: CE 09SKV905

- Mootorikood: DFSB
- Installatsiooni pool: katalüsaatori ees
- Lambda andur: Sond
- Cable Length [mm]: 650
- Conductor Number: 5
- Number of circuits: 5
- Nimetus: EP 1.998.413
- Tootja: EPS
Oxygen Sensor: Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

- Mootorikood: DFSB
- Installatsiooni pool: katalüsaatori ees
- Kaablipikkus (mm): 650
- Ühendushulk: 5
- Ülekandeliinide arv: 5
- Tootja: FACET
Lambda andur: Sond, soojendatud, Titaanandur, Lineaarne lambda andur, Keere eelmääritud

-
Installatsiooni pool: B-
piilar, C- piilar - Fitting Position: lateral installation
- Version: CRASHSENSOR
- Airbag: for side airbag
- Tootja: METZGER

- Kvaliteet: OE EQUIVALENT
- OE-numbri jaoks: 0281002956
- Tootja: MEAT&DORIA

- Korpusetüüp: koos korpusega
- Pistikkontaktide arv: 4
- Pistikute teostus: Male
- Korpusevärv: must
- Pinge [V]: 12
- soovitatav remondimahtu suurendamine: Õhufilter
- Tootja: DELPHI
-
Nimetus: DE AF10397-
12B1

- Väljalaskesüsteem: katalüsaatori ees
- Kaablipikkus (mm): 645
- Pistikkontaktide arv: 2
-
Nimetus: DE TS30339-
12B1 - Tootja: DELPHI

-
Oxygen Sensor: Switching-
type Oxygen Sensor - Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Nimetus: CE 09SKV915
- Tootja: ESEN SKV

- Montaaživiis: Toruotsakud
- Pistikkontaktide arv: 4
- Läbimõõt õhuvõtuühendus [mm]: 80
- Monteerimist/demonteerimist peab tegema spetsialist!:
-
SVHC: 7439-
92- 1; plii - Nimetus: HE 8ET009149441
- Tootja: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- Installatsiooni pool: katalüsaatori ees
- Kuju: gewinkelt
- Pistikkontaktide arv: 2
-
Pistikukatte kuju: D-
kuju - temperatuurivahemik alates [°C]: −40
- Temperatuurivahemik kuni [°C]: 900
- Tootja: VEMO GERMANY
Üldine informatsioon: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.

- Installatsiooni pool: pärast tahmafiltrit
- Montaaživiis: kruvitud
- Pistikkontaktide arv: 2
- Kaablipikkus (mm): 880
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 6PT358226431
- Tootja: HELLA

- soovitatav remondimahtu suurendamine: Õhufilter
- Tootja: BOSCH
- Nimetus: BS 0281002956

- Fitting Position: before exhaust turbocharger
- Cable Length [mm]: 530
- Number of pins: 2
- Tootja: METZGER

- Installatsiooni pool: enne heitgaaside turbokompressorit
- Kaablipikkus (mm): 530
- Piirangutega toode/piirangu info: sünteetilise määrdega

- Anduritüüp: Hallsensor
- Montaaživiis: Kruviühendus
- Kuju: ovaalne
- Ühenduste arv: 3
- Installatsiooni sügavus (mm): 24
- Piirangutega toode/piirangu info 2: koos rõngastihendiga