• Tootja: FAST
• Lisainfo: FASFT75105

• Ehitusaasta kuni: 12.2012
• Korpusevärv: must
• Weight [kg]: 0.021
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: K9K 892
• Korpusevärv: must
• Nimetus: EP 1.830.337
• Tootja: EPS

for article number: 1.880.666, 1.880.703S, 1.880.706, 1.880.710S, 1.880.716, 1.880.718, 1.880.719, 1.880.720, 1.880.737, 1.880.782, 1.880.785, 1.880.883, 7.8916, 1.880.930

• Mootorikood: K9K 892
• Korpusevärv: must
• Tootja: FACET

for article number: 7.8666, 7.8703S, 7.8706, 7.8710S, 7.8716, 7.8718, 7.8719, 7.8720, 7.8737, 7.8782, 7.8785, 7.8883, 7.8916, 7.8930

Tootja: MAGNETI MARELLI

• Fabrication Number: ECM-RE-006
• Tootja: NTY

Lisainfo: ENG. 0.9-2.5D RENAULT CLIO 12-,MEGANE 03-,TRAFIC 06-, OPEL MOVANO 06-,VIVARO 01-,NISSAN MICRA III 05-12,NOTE 06-12,FIAT 500 09-,DOBLO 10-,DACIA DUSTER 10-,LOGAN 10-,DOKKER 12-,ALFA ROMEO 159 09-12, GIULIETTA 10-

Tootja: FAST

• Sensor Type: Hall Sensor
• Number of pins: 3
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Tootja: JPN

• Sensor Length [mm]: 28.2
• Tootja: JPN

• Number of pins: 2
• Tootja: JPN

• vajaminev tükihulk: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BREMI

• Pressure from [bar]: 0.11
• Pressure to [bar]: 3.06
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• vajaminev tükihulk: 1
• Tootja: BREMI

• Height [mm]: 28.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Tootja: VERNET

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• for OE number: 223650001R
• Tootja: DELLO AUTOMEGA

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Alternative Repair Kit: 550897
• Tootja: ERA

• Mootori number kuni: 090601
• Number of pins: 3
• Tootja: DELPHI
• Nimetus: DE SS11005

• Mootorikood: K9K 892
• vajaminev tükihulk: 1
• Thread Size: M12x1,25
• Spanner Size: 24
• Nimetus: EP 1.957.224
• Tootja: EPS

• Number of pins: 3
• Pressure from [kPA]: 27
• Tootja: DELPHI
• Nimetus: DE PS10130

• Ehitusaasta alates: 11.2010
• Ehitusaasta kuni: 11.2012
• Diameter [mm]: 12.6
• Weight [kg]: 0.02
• Tootja: VALEO

• Mootorikood: K9K 892
• vajaminev tükihulk: 1
• Thread Size: M12x1,25
• Spanner Size: 24
• Tootja: FACET

• Mootorikood: K9K 892
• Number of pins: 2
• Connector Shape: rectangular
• Thread Size: M12x1,25
• Spanner Size: 24
• for OE number: 2206000Q0A
• Tootja: MEAT & DORIA

• Thread Size: M12x1.25
• Spanner Size: 24
• Number of pins: 2
• Connector Shape: rectangular
• Tootja: FAST

• Mootorikood: K9K 892
• Nimetus: EP 1.953.616
• Tootja: EPS

• Mootorikood: K9K 892
• Tootja: FACET

• Mootori number alates: 090601
• Number of pins: 3
• Tootja: DELPHI
• Nimetus: DE SS11142
• Lisainfo: SS11142 DELPHI

• Ehitusaasta alates: 11.2010
• Ehitusaasta kuni: 11.2012
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Tootja: VALEO
• Nimetus: VA 253803

• Number of pins: 3
• Tootja: JPN

• Heitgaaside normatiiv: Euro 5
• Number of pins: 3
• Tootja: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mootorikood: K9K 892
• Pressure from [kPA]: 11
• Pressure to [kPA]: 306
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Nimetus: EP 1.993.121
• Tootja: EPS

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 27.8
• Housing Colour: black
• Tootja: FAE

• Mootorikood: K9K 892
• Pressure from [kPA]: 11
• Pressure to [kPA]: 306
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Tootja: FACET

• Ehitusaasta kuni: 12.2015
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 17SKV656
• Tootja: ESEN SKV

• Ehitusaasta kuni: 12.2012
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PU013122541

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Tootja: FAE

• Number of connectors: 3
• Tootja: 3RG

• Ehitusaasta kuni: 12.2015
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Tootja: BOSCH

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.052
• Tootja: ERA

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Tootja: VDO

• Ehitusaasta kuni: 12.2012
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PP358152301
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Tootja: DELPHI
• Nimetus: DE AS10236

• Number of pins: 3
• Guarantee: 5 years guarantee
• Nimetus: HU 137422
• Tootja: HUECO / HITACHI

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Mootorikood: K9K 892
• Colour: black
• Number of pins: 3
• Tootja: VDO

• Number of pins: 3
• General Information: Sold in Hitachi brand: printing and packaging
• Nimetus: HI 2507422
• Tootja: HITACHI

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Material: Plastic
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Andurite arv: 2
• Height [mm]: 28
• Number of connectors: 3
• Required quantity: 1
• Supplementary Article/Info 2: for camshaft, without cable, with seal ring
• Colour: black
• Operating Mode: Electric
• Sensor Type: Active sensor, Hall Sensor
• Number of pins: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 28
• Connector Shape: oval
• Number of mounting bores: 1
• Weight [kg]: 0.034
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Fuel Rail
• Number of pins: 3
• Fuel Mixture Formation: Common Rail (CR)
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: FAE

• Transmission Type: Manual Transmission
• for OE number: 60 01 548 477, 82 00 386 506
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of pins: 6
• Connector Shape: rectangular
• Number of mounting bores: 3
• Fabrication Number: EAP-RE-000
• Tootja: NTY
• Nimetus: NTY EAP-RE-000

• Number of pins: 3
• Colour: black
• Pressure [Pa] to: 150,000
• Supplementary Article/Info 2: without connection line
• Tootja: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of connectors: 3
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 27.8
• Connector Shape: oval
• Tootja: METZGER

• for OE number: 82 00 929 533
• Overall Length [mm]: 380
• Number of pins: 2
• Socket colour: brown
• Fabrication Number: EGT-RE-014
• Cable Length [mm]: 225

• Housing Type: with housing
• Fabrication Number: EPP-PL-024
• Tootja: NTY

• Versioon: 401
• for OE number: 82 00 688 566
• Overall Length [mm]: 400
• Cable Length [mm]: 260
• Number of pins: 2
• Connector Shape: rectangular
• Guarantee: 3 years guarantee
• Exhaust System: after catalytic converter
• Socket colour: green
• Weight [kg]: 0.08
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 30SKV376

• Mootorikood: K9K 892
• Väljalaskesüsteem: pärast turbokompressorit
• Voltage [V]: 12
• Cable Length [mm]: 225
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 30SKV250
• Tootja: ESEN SKV

• Number of pins: 2
• Tootja: JPN

• Väljalaskesüsteem: turbokompressori ees
• Voltage [V]: 12
• Cable Length [mm]: 230
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 30SKV249
• Tootja: ESEN SKV

• for OE number: 82 01 028 744
• Overall Length [mm]: 365
• Number of pins: 2
• Socket colour: grey
• Fabrication Number: EGT-RE-013
• Cable Length [mm]: 235
• Tootja: NTY

• Installatsiooni pool: Tahmaosakeste filter
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: grey
• Spanner Size: 17
• Thread Pitch [mm]: 1.25
• Thread Size: M 12
• Overall Length [mm]: 366
• Cable Length [mm]: 235
• Supplementary Article/Info 2: with cable
• Bolt Head-/Nut Design: Hexagon
• Shape: straight
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 82 01 028 744
• Overall Length [mm]: 365
• Cable Length [mm]: 235
• Number of pins: 2
• Guarantee: 3 years guarantee
• Exhaust System: after catalytic converter
• Socket colour: grey
• Weight [kg]: 0.07
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 30SKV354

• Väljalaskesüsteem: katalüsaatori ees
• Cable Length [mm]: 240
• Number of pins: 2
• Nimetus: DE TS30384-12B1
• Tootja: DELPHI

• Ehitusaasta kuni: 12.2012
• vajaminev tükihulk: 1
• Number of pins: 2
• Tightening Torque [Nm]: 22
• Spanner Size: 24
• Thread Size: M12 x 1,25
• Sensor Type: Piezoelectric Sensor
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PG009108881
• Tootja: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Fitting Position: Fuel Rail
• Supplementary Article/Info 2: High Pressure Side
• Tootja: METZGER

• Housing Type: with housing
• Housing material: Plastic
• Number of pins: 4
• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Tootja: JPN

• Heitgaaside normatiiv: kuni Euro 5
• Number of pins: 3
• Number of connectors: 1
• Supplementary Article/Info 2: without connection line
• Tootja: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Mootorikood: K9K 892
• Korpusetüüp: koos korpusega
• Length [mm]: 110
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Tootja: EPS

• Ehitusaasta kuni: 12.2015
• Tootja: BOSCH

• Versioon: 401
• Fitting Position: before soot particulate filter
• Cable Length [mm]: 260
• Thread Size: M12 x 1,5
• Number of pins: 2
• Tootja: METZGER

• Number of pins: 4
• New Part:
• Used part return not required:
• Recommended additional repairs: Air Filter
• Weight [kg]: 0.184
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: katalüsaatori ees
• Cable Length [mm]: 235
• Number of pins: 2
• Tootja: METZGER

• Number of pins: 2
• Socket colour: grey
• Cable Length [mm]: 235
• Overall Length [mm]: 365
• for OE number: 8201028744
• Tootja: MEAT&DORIA

• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Nimetus: DE AF10653-12B1
• Tootja: DELPHI

• Cable Length [mm]: 270
• Number of pins: 2
• Fitting Depth [mm]: 57
• Tootja: ERA

• Cable Length [mm]: 250
• Number of pins: 2
• Fitting Depth [mm]: 28
• Tootja: ERA

• Käigukasti liik: Käigukast
• Number of pins: 6
• Colour: black
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Tootja: METZGER

Vehicle Equipment: for vehicles with electronic accelerator pedal (DbW)

• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PV010946191

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Ehitusaasta kuni: 12.2012
• Mounting Type: Pipe-neck
• Number of pins: 4
• Suction pipe connector diameter [mm]: 69
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: K9K 892
• Operating Mode: Electric
• Voltage [V]: 12
• Tootja: PIERBURG

• Emission Standard: Euro 5
• Number of pins: 4
• for OE number: 8200651315
• Tootja: MEAT&DORIA

• Number of pins: 4
• Inlet Ø [mm]: 70
• Outlet Ø [mm]: 70
• Tootja: ERA

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring