• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Switch Point [°C]: -40, 150
• Thread Size: M12x1,5
• Spanner Size: 22
• Colour: black
• Number of pins: 2
• Tootja: JP GROUP
• Lisainfo: Temperature sensor for cooling system

• Mootorikood: N52 B25 A, N52 B25 B, N52 B25 BF
• Lambda andur: Diagnoosisond
• Installatsiooni pool: pärast katalüsaatorit, silindritele 4-6
• Number of circuits: 4
• Overall Length [mm]: 502
• Recommended change interval [km]: 250,000
• Tootja: BOSCH
• Lisainfo: 0258010414 BOSCH

• Length [mm]: 48
• Spanner Size: 22
• Fitting Position: Cylinder Head
• Housing Colour: black
• Tootja: KAMOKA

• Mootorikood: N52 B25 A
• Spanner Size: 24
• Number of pins: 1
• Tootja: KAVO

• Mootorikood: N52 B25 A
• Värv: pruun
• Surve (bar) kuni: 0,5
• Surve alates (bar): 0,2
• Pressure [bar]: 0.3
• Thread Size: M12x1,5
• Spanner Size: 24
• Tootja: FACET

• Connector Shape: rectangular
• Operating Mode: Hydraulic
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 1
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• Supplementary Article/Info 2: with seal ring
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ECT-BM-011
• Tootja: NTY

• Mootorikood: N52 B25 A
• Värv: pruun
• Surve (bar) kuni: 0,5
• Surve alates (bar): 0,2
• Pressure [bar]: 0.3
• Thread Size: M12x1,5
• Spanner Size: 24
• Nimetus: EP 1.800.071
• Tootja: EPS

• Switch point from [bar]: 0.2
• Length [mm]: 41
• Switch point to [bar]: 0.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: black
• Connector Shape: angular
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M 12x1,5
• Number of pins: 1
• Housing Colour: brown
• Tootja: FAE

• Pressure [bar]: 5
• Housing Colour: brown
• Thread Size: M12×1.5?6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Tootja: DELPHI
• Nimetus: DE SW90027

Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621433076
• Supplementary Article/Info 2: with seal ring
• Tootja: NRF

• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M 12 x 1,5
• Pressure [bar]: 0.3
• for OE number: NUC100350
• Tootja: MEAT&DORIA

• Thread Size: M12x1,5
• Colour: brown
• Weight [kg]: 0.043
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S22
• Thread Size: M12*1,5
• Tootja: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Thread Size: M12x1.5
• Tootja: VERNET

• Pressure [bar]: 0.35
• Thread Size: M12 x 1,5
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Tootja: ERA

• Switch Pressure [bar]: 0.3
• Thread Size: M12x1.5
• Sensor Type: Closed-type Sensor
• Tootja: VERNET

• Housing Colour: black
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 22
• Tootja: DELPHI
• Nimetus: DE TS10270

• Length [mm]: 49
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Fitting Position: Cylinder Head
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• vajaminev tükihulk: 1
• Manufacturer Restriction: für Heizkörper, für Verdampfer
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV695

• Length [mm]: 49
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Fitting Position: Cylinder Head
• Weight [kg]: 0.028
• Supplementary Article/Info 2: with seal ring
• Tootja: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 48.5
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Fitting Position: Cylinder Head
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Nimetus: SW 20 92 9344
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 2
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Latching Connection
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• for OE number: 13621433077
• Supplementary Article/Info 2: with seal ring
• Tootja: NRF

• Mootorikood: N52 B25 A
• Thread Size: M12x1,5
• Spanner Size: 22
• Tootja: FACET

• Mootorikood: N52 B25 A
• Thread Size: M12x1,5
• Spanner Size: 22
• Nimetus: EP 1.830.272
• Tootja: EPS

• Housing Colour: black
• Number of pins: 2
• Thread Size: M 12x1,5
• Tootja: FAE

• Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of pins: 2
• Tootja: ERA

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0
• Nimetus: NI 207010
• Tootja: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Mootorikood: N52 B25 A
• Tootja: FACET

• Mootorikood: N52 B25 A
• Nimetus: EP 1.830.279
• Tootja: EPS

• Thread Size: M12x1,5
• Spanner Size: 22
• Sensor Type: NTC Sensor
• Number of pins: 2
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PT009107851
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 13 62 7 525 014
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Number of mounting bores: 1
• Fabrication Number: ECP-BM-005
• Tootja: NTY

• Fabrication Number: ECP-BM-001
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Colour: black
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Tootja: NTY

• Mootorikood: N52B25A
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Tootja: ESEN SKV

• Sensor Type: Hall Sensor
• Number of pins: 3
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• vajaminev tükihulk: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BREMI

• vajaminev tükihulk: 2
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BREMI

• Mootorikood: N52 B25 A
• Alternatively:
• Number of pins: 3
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Rated Voltage [V]: 12
• Weight [kg]: 0.021
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Height [mm]: 27.9
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Tootja: VERNET

• Mootorikood: N52 B25 A
• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Alternative Repair Kit: 550470
• Rated Voltage [V]: 12
• Tootja: ERA

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Tootja: NTY
• Nimetus: NTY ESL-SK-000

• Number of pins: 3
• Tootja: DELPHI
• Nimetus: DE SS11247

• Number of connectors: 3
• Weight [kg]: 0.025
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Tootja: KAMOKA

• Fitting Position: Intake Manifold
• Number of pins: 2
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Number of mounting bores: 1
• Fitting Depth [mm]: 28
• for OE number: 13627525014
• Tootja: MEAT & DORIA

• Oxygen Sensor: Diagnostic Probe
• Fabrication Number: ESL-FR-011
• Cable Length [mm]: 525
• Tootja: NTY

• Fabrication Number: ESS-BM-001
• Number of pins: 4
• Tootja: NTY

• Mootorikood: N52 B25 A
• vajaminev tükihulk: 2
• Tootja: FACET

• vajaminev tükihulk: 2
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Tootja: VALEO
• Nimetus: VA 366149

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PU009163301

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Tootja: DELPHI

• Mootorikood: N52 B25 A
• vajaminev tükihulk: 2
• Nimetus: EP 1.953.523
• Tootja: EPS

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Alternative Repair Kit: 550604
• Tootja: ERA

• Number of pins: 3
• Tootja: FAE

• Installatsiooni pool: ees vasakul, pärast katalüsaatorit
• Lambda andur: Diagnoosisond
• vajaminev tükihulk: 1
• Number of pins: 4
• Cable Length [mm]: 340
• Oxygen Sensor: Heated
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PA358221501
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 5
• Connector Shape: oval
• Fabrication Number: EPP-BM-017
• Tootja: NTY

• Number of pins: 3
• Housing Colour: black
• Sensor Type: Hall Sensor
• Tootja: VDO

• Voltage [V]: 12
• Housing Type: without housing
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY

• Housing Type: without housing
• Number of pins: 5
• Used part return not required:
• Fabrication Number: EPP-BM-015
• Tootja: NTY

• Length [mm]: 49
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• vajaminev tükihulk: 2
• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PU009121011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Tootja: FAE

• Mootorikood: N52 B25 A, N52NB25A
• Colour: black
• Number of pins: 3
• Tootja: VDO

• Installatsiooni pool: pärast katalüsaatorit
• Oxygen Sensor: Heated, Diagnostic Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 460
• Weight [kg]: 0.086
• Nimetus: SW 33 10 3200
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Tootja: MAGNETI MARELLI

• Installatsiooni pool: ees paremal, pärast katalüsaatorit
• Lambda andur: Diagnoosisond
• Hulk: 1
• Cable Length [mm]: 614
• Oxygen Sensor: Planar probe, Heated
• Tootja: DELPHI
• Nimetus: DE ES20368-12B1

• Mootorikood: N52 B25 A, N52 B25 B, N52 B25 BF
• Lambda andur: Diagnoosisond
• Plokieraldus:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Tootja: BOSCH
• Nimetus: BS 0258986602

Installatsiooni pool: pärast katalüsaatorit, silindritele 1-3, silindritele 4-6