• Number of pins: 2
• Colour: blue
• Tootja: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins

• for OE number: 6160 70, 963 505 72 80, 9635080680
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Fabrication Number: ECP-CT-016
• Tootja: NTY
• Nimetus: NTY ECP-CT-016

Tootja: FAST

• Mootorikood: 220 A 2.000
• Number of pins: 2
• Tootja: KAVO PARTS

• Connector Shape: rectangular
• Colour Coding: blue
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 2
• Switch Point [°C]: 140
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Socket colour: light blue
• Connector Shape: rectangular
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 60800167
• Tootja: MEAT&DORIA

• Thread Size: M12x1.5
• Spanner Size: 19
• Tootja: FAST

• Mudeliaasta kuni: 2000
• Number of pins: 2
• Housing Colour: green
• Colour Coding: yellow
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.02
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: white
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Material: Plastic
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 17SKV789
• Tootja: ESEN SKV

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 60573388
• Supplementary Article/Supplementary Info: with gaskets/seals
• Tootja: NRF

• Thread Size: M12 x 1,5
• Number of pins: 2
• Tootja: ERA

• for OE number: 13 62 1 709 967
• Width [mm]: 45
• Height [mm]: 40
• Length [mm]: 75
• Weight [g]: 25
• Guarantee: 3 years guarantee
• Number of pins: 2
• Tootja: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring
• Tootja: NRF

• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Number of mounting bores: 1
• Tootja: MAGNETI MARELLI

• Number of pins: 2
• Colour: blue
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Tootja: ERA

• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Colour: white
• Material: Plastic
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mootorikood: 220 A 2.000
• Number of pins: 2
• Height [mm]: 51.8
• Weight [kg]: 0.029
• Supplementary Article/Info 2: with seal ring
• Thread Size: M12x1,5
• Housing Colour: blue
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Käigukasti liik: Automaatkäigukast
• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• for OE number: 6160 70
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M12x1.5
• Tootja: VERNET

• Thread Size: M12x1,5
• Housing Colour: blue
• Tootja: FAE

• Tightening torque to [Nm]: 22
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour Coding: blue
• Tootja: MAGNETI MARELLI
• Nimetus: MM SPA104

• Mootorikood: 220 A 2.000
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Nimetus: EP 1.830.128
• Tootja: EPS

• Mootorikood: 220 A 2.000
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 7.8113, 7.8114, 7.8149, 7.8151
• Tootja: FACET

• Length [mm]: 51
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 11
• Spanner Size: 19
• Number of connectors: 2
• Colour Coding: blue
• Switch Point [°C]: 20
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 355
• Number of pins: 3
• Tootja: DELPHI
• Nimetus: DE SS10897

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Tootja: DELPHI
• Nimetus: DE TS10250

• Ehitusaasta alates: 09.1999
• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• for OE number: 616024
• Tootja: MEAT&DORIA

• Ehitusaasta kuni: 05.2000
• Thread Size: M 12x1,5
• Number of pins: 2
• Housing Colour: green
• Colour Coding: yellow
• Tootja: FAE

• Length [mm]: 51
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 11
• Spanner Size: 19
• Number of connectors: 2
• Colour: blue
• Colour Coding: blue
• Switch Point [°C]: 20
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Nimetus: SW 40 91 7695
• Tootja: SWAG
• Lisainfo: 40 91 7695 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: 220 A 2.000
• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 302
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: blue
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: blue
• Manufacturer Restriction: Bosch
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PT009107361
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 25.5
• Connector Shape: rectangular
• Weight [kg]: 0.04
• Resistor M[ohm]: 2
• Tootja: ERA

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-CT-008
• Tootja: NTY

Tootja: 3RG

• Ehitusaasta kuni: 05.2000
• Tootja: BOSCH

• Mootorikood: 220 A 2.000
• Resistor [Ohm]: 900
• Overall Length [mm]: 435
• Cable Length [mm]: 400
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Weight [kg]: 0.111
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta kuni: 12.2003
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 700
• Weight [kg]: 0.08
• Tootja: VALEO
• Nimetus: VA 254048

• Ehitusaasta alates: 09.1997
• Ehitusaasta kuni: 05.2000
• Fitting Position: Rear Axle Right, Rear Axle Left
• Cable Length [mm]: 850
• Sensor Type: Passive sensor
• Number of pins: 2
• Tootja: AUTOFREN SEINSA
• Nimetus: SE DS0314

• Ehitusaasta alates: 06.1997
• Ehitusaasta kuni: 12.1999
• Fitting Position: Front Axle
• Length [mm]: 760
• Number of pins: 2
• Plug Type: Female
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.15
• Operating Mode: Electric
• Socket colour: grey
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 06SKV271
• Tootja: ESEN SKV

• Installatsiooni pool: Esisild
• Ehitusaasta alates: 06.1997
• Overall Length [mm]: 865
• Length [mm]: 26
• Sensor Type: Passive sensor
• Socket colour: grey
• Cable Length [mm]: 765
• paired article number: 30469
• Weight [kg]: 0.18
• Tootja: A.B.S.

• Ehitusaasta alates: 05.1997
• Ehitusaasta kuni: 12.1999
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Number of pins: 2
• Cable Length [mm]: 813
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ehitusaasta kuni: 12.2004
• Fitting Position: Rear Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 907
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild
• ettevõttenumber alates jaoks: 07481
• ettevõttenumber kuni jaoks: 09050
• Ehitusaasta alates: 06.1997
• Overall Length [mm]: 966
• Length [mm]: 36
• Sensor Type: Passive sensor
• Socket colour: grey
• Cable Length [mm]: 875
• paired article number: 30497
• Weight [kg]: 0.19
• Tootja: A.B.S.

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Tootja: NTY
• Nimetus: NTY ESL-SK-000

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Tootja: NTY

• Ehitusaasta alates: 06.2004
• Käigukasti ID: MC
• Plokieraldus:
• Number of connectors: 3
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Tootja: FEBI BILSTEIN

Käigukasti liik: Käigukast, käigukast 6 käiku, automaatselt käivitatav General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe
• Fabrication Number: ESL-FR-011
• Cable Length [mm]: 525

• Installatsiooni pool: Esisild
• Ehitusaasta alates: 05.1997
• Ehitusaasta kuni: 12.1999
• Kerenumber (VIN) alates: VET7480->VET8420
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 830
• Tootja: DELPHI LOCKHEED HAMULCE

• Mootorikood: 220 A 2.000
• Number of pins: 3
• Tootja: FAE ELEKTRYKA

• Ehitusaasta alates: 06.2004
• Käigukasti ID: MC
• Plokieraldus:
• Number of connectors: 3
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Nimetus: SW 62 93 8684
• Tootja: SWAG

Käigukasti liik: Käigukast, käigukast 6 käiku, automaatselt käivitatav General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Version: IAM
• Tootja: METZGER

• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 780
• Number of pins: 2
• Fitting Depth [mm]: 27
• Tootja: ERA

• Ehitusaasta alates: 06.2004
• Käigukasti ID: MC
• Plokieraldus:
• Transmission Code: MA / MA S, BVA MB3
• Number of pins: 3
• Connector Shape: rectangular
• Weight [kg]: 0.04
• Tootja: VEMO GERMANY

Käigukasti liik: Käigukast, käigukast 6 käiku, automaatselt käivitatav General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: paremal, vasakul, Esisild
• Cable Length [mm]: 841
• Nimetus: SN ASB166.10
• Tootja: NTN-SNR

• vajaminev tükihulk: 2
• Installatsiooni pool: Tagasild
• Length [mm]: 1,502
• MAPP code available:
• Tootja: ATE

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 720
• Overall Length [mm]: 830
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Weight [kg]: 0.1
• Nimetus: VA 369004
• Tootja: VALEO

• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,500
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.18
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Tootja: ESEN SKV
• Lisainfo: 09SKV657 SKV

• Ehitusaasta kuni: 05.2000
• Kerenumber (VIN) kuni: 8574
• Lambda andur: Sond
• Väljalaskesüsteem: eelkatalüsaatori jaoks
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Oxygen Sensor: Heated, Finger probe, Oxygen Sensor
• Gross Weight [g]: 149
• Tootja: DENSO
• Nimetus: DN DOX-0120
• Kvaliteediklass: Q

Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Length [mm]: 1,550
• Number of pins: 4
• Technical Information Number: Universal 77008
• Tootja: FAE

• Lambda andur: Sond
• Cable Length [mm]: 1,500
• Oxygen Sensor: Planar probe, Heated
• Tootja: DELPHI

• Tootmise kuupäev alates: 15.08.2001
• Required quantity: 2
• Fitting Position: Rear Axle
• Tootja: METZGER

• Ehitusaasta kuni: 05.2000
• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Tootja: BOSCH
• Nimetus: BS 0258986506

• Mootorikood: 220 A 2.000
• Lambda andur: Sond
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Finger probe, Heated, Thread pre-greased
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Tootja: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda andur: Sond
• Mudeliaasta kuni: 2000
• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,500
• Weight [kg]: 0.17
• for OE number: 1628.2T
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta alates: 05.2000
• Kerenumber (VIN) alates: 8574
• Lambda andur: Sond
• Väljalaskesüsteem: eelkatalüsaatori jaoks
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Tootja: DENSO
• Nimetus: DN DOX-0150
• Kvaliteediklass: Q

Oxygen Sensor: Heated, Planar probe, Thread pre-greased, Oxygen Sensor Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda andur: Sond
• Cable Length [mm]: 317
• Oxygen Sensor: Finger probe, Heated
• Tootja: DELPHI

• Ehitusaasta kuni: 05.2000
• Kerenumber (VIN) kuni: 8574
• Lambda andur: Sond
• Väljalaskesüsteem: eelkatalüsaatori jaoks
• for OE number: 9628448280
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,485
• Number of pins: 4
• Weight [g]: 149
• Oxygen Sensor: Heated, Finger probe, Oxygen Sensor
• Gross Weight [g]: 179
• Tootja: DENSO

• Ehitusaasta alates: 05.2000
• Kerenumber (VIN) alates: 8574
• OE-numbri jaoks: 9635978980
• Lambda andur: Sond
• Väljalaskesüsteem: eelkatalüsaatori jaoks
• for OE number: 8677894
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,250
• Number of pins: 4
• Weight [g]: 102
• Gross Weight [g]: 135
• Tootja: DENSO
• Nimetus: DN DOX-2045
• Lisainfo: DOX-2045 DENSO

Oxygen Sensor: Heated, Planar probe, Thread pre-greased, Oxygen Sensor

• Ehitusaasta kuni: 05.2000
• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Number of circuits: 4
• Overall Length [mm]: 1,520
• Available as universal article as well, see article no.: 0258986506
• Recommended change interval [km]: 100,000
• Tootja: BOSCH