• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Tootja: JP GROUP
• Lisainfo: Shock Absorber

• Installatsiooni pool: Esisild
• Height [mm]: 205
• Material: Rubber
• for OE number: 525447, 55700767
• Tootja: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Material: Rubber
• Quantity per axle: 2
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Tootja: AUTO-GH

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AB-PL-002
• Tootja: NTY

• Ehitusaasta kuni: 10.2012, 06.2013
• Sõidukitüüp: Grande Punto, Punto
• Installatsiooni pool: Esisild, kahepoolne
• Plokieraldus:
• Ehitusaasta alates: 10.2005
• Quality: OE Performance
• Colour: silver
• Weight [g]: 131
• Tootja: GATES

• Fitting Position: Front Axle
• Height [mm]: 205
• Required quantity: 2
• Tootja: MAX

Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid OPEL P. CORSA D -06

• Height [mm]: 195
• Inner Diameter 1 [mm]: 67
• Fitting Position: Front Axle
• Weight [kg]: 0.086
• Inner Diameter 2 [mm]: 80
• Required quantity: 2
• Nimetus: Kaitsemts/kaitsekumm,amort
• Tootja: TED

• Fitting Position: Front Axle
• Height [mm]: 207
• Material: Rubber
• Weight [g]: 185
• Diameter 1 [mm]: 63.8
• Diameter 2 [mm]: 77.8
• Nimetus: IM 25723
• Tootja: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Height [mm]: 205
• Inner Diameter 1 [mm]: 66
• Inner Diameter 2 [mm]: 80
• Tootja: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle
• Height [mm]: 205
• Diameter [mm]: 80, 66
• Required quantity: 2
• replacement in pairs recommended:
• Tootja: MEY

Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid OPEL P. CORSA D

• Fitting Position: Front Axle
• Weight [kg]: 0.254
• Packaging length [cm]: 21
• Packaging width [cm]: 10.6
• Packaging height [cm]: 10.6
• Tootja: FEBEST

• Length [mm]: 205
• Inner Diameter [mm]: 80, 66
• Material: Rubber
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.13
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid OPEL P. CORSA D

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Tootja: KAMOKA AMORTYZATORY

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• ei ole sõiduki varustusvariandi jaoks: Classic Line
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Tootja: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: SMA0165, SMA0166
• Shock Absorber Design: Telescopic Shock Absorber
• Tootja: ASHIKA
• Lisainfo: MA-W0004

• Fabrication Number: A-FT-005
• Fitting Position: Rear Axle Left, Rear Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Observe technical data:
• Replace in pairs only:

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Tootja: DENCKERMANN AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Tootja: DACO GERMANY

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• for OE number: 55700452
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Tootja: AUTO-GH

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Fitting Position: Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Suspension: for vehicles with standard suspension
• Shock Absorber System: Twin-Tube
• max. length [mm]: 649
• Tootja: FAST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Tootja: OYODO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: SMJ0165, SMJ0166
• Shock Absorber Design: Telescopic Shock Absorber
• Tootja: JAPKO

• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Nimetus: Gas shock absorber
• Kvaliteediklass: PJ

Šassii: sportvedrustusega sõidukile, tavavedrustusega sõidukile Lisainfo: "Tootja: SRL
GRANDE PUNTO/CORSA D
(kvaliteediklass: PJ)"

• soovitava lisavarustuse artiklinumber: 2147410003
• Šassii: tavavedrustusega sõidukile
• ei ole sõiduki varustusvariandi jaoks: ClassicLine
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-1210
• Nimetus: AMORT
• Tootja: MAX

• Nimetus: Gas shock absorber
• Kvaliteediklass: PJ

Lisainfo: "Tootja: MAGNETI MARELLI
FIAT GRANDE PUNTO
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Nimetus: BM SA1878
• Tootja: BREMSI

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Tootja: KAVO

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Fabrication Number: A-PL-025

• Fitting Position: Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Damper without Rebound Spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• max. length [mm]: 648
• Tootja: FAST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: SM0165, SM0166
• Shock Absorber Design: Telescopic Shock Absorber
• Nimetus: AMORT
• Tootja: JPA

• Kogus pakendis: 2
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 39
• Length 1 [mm]: 640
• Length 2 [mm]: 396
• Piston Rod Diameter [mm]: 12
• Quantity per axle: 1
• Observe technical data:
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Tootja: KAMOKA

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-1746
• paired article number: 11-0374
• Nimetus: AMORT
• Tootja: MAX
• Lisainfo: MGA-5732

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 11-0375
• Article number of recommended accessories: 72-1746
• Nimetus: AMORT
• Tootja: MAX

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Weight [kg]: 1.514
• Packaging length [cm]: 49
• Packaging width [cm]: 5.2
• Packaging height [cm]: 4.2
• Tootja: FEBEST

• soovitava lisavarustuse artiklinumber: 214 741 0003, 214 741 0004
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: 714 740 0000
• Replace in pairs only:
• Nimetus: AMORT
• Tootja: MEY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Tootja: DRIVE

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Tootja: JP GROUP
• Lisainfo: Shock Absorber

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Tootja: JP GROUP
• Lisainfo: Shock Absorber

• Fitting Position: Rear Axle
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Spring Type: for vehicles with coil spring suspension
• Nimetus: Amort
• Tootja: MAG

• Fabrication Number: A-FT-019
• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: A-FT-020
• Observe technical data:
• Replace in pairs only:

• Fabrication Number: A-FT-020
• Fitting Position: Front Axle Left
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: A-FT-019
• Observe technical data:
• Replace in pairs only:

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top eye
• Fabrication Number: A-FT-006

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Fabrication Number: A-FT-007

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension: for vehicles with standard suspension
• Tootja: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension: for vehicles with standard suspension
• Tootja: KAMOKA AMORTYZATORY

• Installatsiooni pool: Tagasild
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.8
• Bore Diameter [mm]: 25
• Length 1 [mm]: 394
• Length 2 [mm]: 650
• Piston Rod Diameter [mm]: 12.4
• Article number of recommended accessories: MK384R, MK385L, PK018
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Tootja: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Tootja: DENCKERMANN AMORTYZATORY

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Installatsiooni pool: Esisild
• Šassii: tavavedrustusega sõidukile
• ei ole sõiduki varustusvariandi jaoks: Classic Line
• Mudeliaasta kuni: 2009
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Tootja: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Esisild
• Šassii: tavavedrustusega sõidukile
• Mudeliaasta kuni: 2009
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Right
• Shock Absorber Mounting Type: Top pin
• paired article number: 232-01-098
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Esisild
• Šassii: tavavedrustusega sõidukile
• Mudeliaasta kuni: 2009
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Left
• Shock Absorber Mounting Type: Top pin
• paired article number: 232-01-099
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Spring Type: for vehicles with coil spring suspension
• Tootja: MAGNETI MARELLI

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Nimetus: AMORT
• Tootja: KYB

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Installatsiooni pool: Esisild
• Šassii: tavavedrustusega sõidukile
• ei ole sõiduki varustusvariandi jaoks: Classic Line
• Mudeliaasta kuni: 2009
• Fitting Position: Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Parameter: SFE32/22X177A
• Shock Absorber Mounting Type: Top pin
• Nimetus: CFD 452372R
• Tootja: DACO

• Installatsiooni pool: Esisild
• Šassii: tavavedrustusega sõidukile
• ei ole sõiduki varustusvariandi jaoks: Classic Line
• Mudeliaasta kuni: 2009
• Fitting Position: Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Parameter: SFE32/22X177A
• Shock Absorber Mounting Type: Top pin
• Nimetus: CFD 452372L
• Tootja: DACO

• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Right
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Nimetus: Gas shock absorber right
• Kvaliteediklass: PJ

Šassii: sportvedrustusega sõidukile, tavavedrustusega sõidukile Lisainfo: "Tootja: SRL
GRANDE PUNTO/CORSA D
(kvaliteediklass: PJ)"

• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Left
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Nimetus: Gas shock absorber left
• Kvaliteediklass: PJ

Šassii: sportvedrustusega sõidukile, tavavedrustusega sõidukile Lisainfo: "Tootja: SRL
GRANDE PUNTO/CORSA D
(kvaliteediklass: PJ)"

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Tootja: KAMOKA

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Tootja: KAMOKA

• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Piston Rod Diameter [mm]: 22
• paired article number: MA-00823
• Article number of recommended accessories: SMA0149
• Shock Absorber Mounting Type: Top pin
• Tootja: ASHIKA-AMORTYZATORY

• Ehitusaasta kuni: 10.2012
• Installatsiooni pool: Esisild, paremal
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Tootja: OYODO

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Fitting Position: Front Axle Right
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• paired article number: 351938070200
• Spring Type: for vehicles with coil spring suspension
• Nimetus: AMORT
• Tootja: MAG

• Fitting Position: Front Axle Left
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• paired article number: 351938070100
• Spring Type: for vehicles with coil spring suspension
• Nimetus: AMORT
• Tootja: MAG

• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: MA-00173
• Piston Rod Diameter [mm]: 20
• Article number of recommended accessories: SMA0149
• Shock Absorber Mounting Type: Top pin
• Tootja: ASHIKA-AMORTYZATORY

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• max. length [mm]: 653
• min. length [mm]: 418
• Standpipe Diameter [mm]: 40
• Piston Rod Diameter [mm]: 12
• Piston Rod Thread: M10X125
• Tootja: SNR AMORTYZATORY

• Fitting Position: Front Axle Left
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: MA-00174
• Piston Rod Diameter [mm]: 20
• Article number of recommended accessories: SMA0149
• Shock Absorber Mounting Type: Top pin
• Tootja: ASHIKA

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• ei ole sõiduki varustusvariandi jaoks: Classic Line
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV27/13X252A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Nimetus: AMORT
• Tootja: SAA

• Installatsiooni pool: Esisild, vasakul
• Ehitusaasta kuni: 10.2012
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Tootja: OYODO

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Fitting Position: Front Axle Left
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: MJ00174
• Piston Rod Diameter [mm]: 20
• Article number of recommended accessories: SMJ0149
• Shock Absorber Mounting Type: Top pin
• Tootja: JAPKO

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: MJ00173
• Piston Rod Diameter [mm]: 20
• Article number of recommended accessories: SMJ0149
• Shock Absorber Mounting Type: Top pin
• Tootja: JAPKO

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• paired article number: SSA-10003
• Tootja: KAVO