• PR-numbri jaoks: 1ZA
• Length [mm]: 400
• Tootja: JP GROUP A/S

• Fitting Position: Rear Axle
• Length [mm]: 390
• Brake System: TRW
• Lisainfo: Sensor, brake pad wear

• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Component Number: G17
• Nimetus: Andur,v„listemperatuur
• Tootja: HAN

Housing material: Plastic, GRP (Glass fibre Reinforced Plastic), Polyamid 6.6 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• pidurikettaläbimõõdule (mm): 318, 338
• Fitting Position: Front Axle
• Length [mm]: 283
• Brake System: ATE
• Tootja: JP GROUP
• Lisainfo: Sensor, brake pad wear

• Supplementary Article/Info 2: without sensor, without cable, with a plug
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front
• Supplementary Article/Info 2: with plug, without cable
• Number of pins: 3
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Connector Shape: D Shape
• Consult accessories list for recommended additional repairs:
• Nimetus: NIVOOLšLITI, PESUVEEKOGUS
• Tootja: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Info 2: without sensor, with plug, without cable
• Number of pins: 2
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Üldine informatsioon: temperature sensor
• Tootja: VIKA

• Fabrication Number: ECT-AU-003
• Tootja: NTY

• Supplementary Article/Info 2: with plug, without cable
• for OE number: 4D0971993
• Number of pins: 3
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: without sensor, with plug, without cable
• Number of pins: 2
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: outer
• Nimetus: Andur,v„listemperatuur
• Tootja: MAX

• Fitting Position: Front
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 17SKV702
• Tootja: ESEN SKV

• Weight [g]: 15
• Nimetus: IM 5309
• Tootja: ORIGINAL IMPERIUM

• Number of connectors: 2
• Colour: black
• Fitting Position: Front
• Weight [kg]: 0.004
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Üldine informatsioon: temperature sensor
• Tootja: VIKA

• Sõidukivarustus: sõidukitele poolautomaatse parkimisabi süsteemiga
• PR-numbri jaoks: 7X5
• Surface: primed
• Sensor Type: Ultrasonic Sensor
• Fitting Position: both sides, Rear, inner, Front, outer, Centre
• Fabrication Number: EPDC-AU-016
• Tootja: NTY
• Nimetus: NTY EPDC-AU-016

• Üldine informatsioon: temperature sensor
• Tootja: VIKA

• for OE number: 4D0971993
• Supplementary Article/Info 2: with plug, with cable
• Number of pins: 3
• Nimetus: Kaabliparanduskomplekt, ktuserohu andur
• Tootja: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild
• Hulk: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Nimetus: DE SS21285-12B1
• Tootja: DELPHI

• Number of pins: 2
• Plug Type: Blade Terminal
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Mootorikood: CWGD
• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Tootja: NISSENS

• Number of pins: 2
• Sensor Type: NTC Sensor
• Fitted Diameter [mm]: 12
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Connector Shape: oval
• Supplementary Article/Supplementary Info: with gasket/seal
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: without cable
• Socket colour: black
• Fabrication Number: ESS-VW-000
• Tootja: NTY

• General Information: temperature sensor
• Tootja: BORSEHUNG

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Nimetus: SW 30 92 9318
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta kuni: 11.2019
• Installatsiooni pool: Tagasild
• vajaminev tükihulk: 2
• Sensor Type: Hall Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PU358218481

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Installatsiooni pool: ees
• Pistikkontaktide arv: 2
• Võimsus [W]: 0,06
• Tootja: METZGER

• Ehitusaasta kuni: 11.2019
• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Sensor Type: Hall Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Quantity per axle: 2
• Length [mm]: 76
• Braking/Drive Dynamics: for vehicles with ABS
• Connector Shape: D Shape
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• for OE number: 030 905 377 C, YM21 12A699 BA
• Tootja: MEAT&DORIA

• Length [mm]: 24
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fabrication Number: ECP-AU-029
• Tootja: NTY

• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Fitting Position: Front Axle Right, Front Axle Left
• Fitting Depth [mm]: 47.5
• Number of pins: 2
• Nimetus: Andur, rattap””rete arv
• Tootja: MAX

• Installatsiooni pool: Esisild
• Overall Length [mm]: 75
• Length [mm]: 48
• Sensor Type: Active sensor
• Socket colour: black
• paired article number: 32059
• Weight [kg]: 0.02
• Tootja: A.B.S.

• Installatsiooni pool: Tagasild
• Overall Length [mm]: 70
• Tootja: BOSCH

• Hulk: 1
• Number of pins: 3
• Fitting Depth [mm]: 24
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MAX

• Fitting Position: Rear
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Nimetus: Sensor, parkimisabi
• Tootja: MAG

• Installatsiooni pool: vasakul, piki, paremal, sees, väljas
• Fitting Position: Front, Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY

• Installatsiooni pool: ees, taga, kese
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Connector Shape: rectangular
• Chemical Properties: Paintable
• for OE number: 5Q0919275B
• Tootja: DELLO AUTOMEGA

• Mootorikood: CWGD
• Korpusevärv: hall
• Korpusetüüp: Alumiiniumkorpus
• Tootja: FACET

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.01
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: väljas, taga, sees
• Anduritüüp: Ultraheliandur
• Pistikkontaktide arv: 3
• OE-numbri jaoks: 5Q0 919 275 B GRU
• Värv: must
• Kuju: gewinkelt
• Piirangutega toode/piirangu info: koos tihendiga
• Pealispind: krundeeritud
• Ühenduste arv: 3
• Kvaliteediklass: PJ
• Nimetus: Parking sensor

Lisainfo: (kvaliteediklass PJ)

• Installatsiooni pool: Esisild
• Overall Length [mm]: 80
• Tootja: BOSCH

• Mootorikood: CWGD
• Korpusevärv: hall
• Korpusetüüp: Alumiiniumkorpus
• Nimetus: ANDUR, KšTUSETEMPERATUUR
• Tootja: EPS

• Fitting Position: Rear
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Tootja: MAGNETI MARELLI

• Installatsiooni pool: vasakul, paremal, sees, väljas
• Fitting Position: Front, Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 28SKV071

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: FAE ELEKTRYKA

• Number of pins: 2
• Sensor Type: NTC Sensor
• Connector Shape: angled
• Fitting Position: Air duct, to interior blower
• Housing material: GRP (Glass fibre Reinforced Plastic), PA 6 GF 30
• Always compare old and new part (in particular OE No.):
• Vehicle Equipment: for vehicles with air conditioning
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• tootmise kuupäev kuni: 06.02.2023
• Installatsiooni pool: Sisselaskepool, Väljalaskepool
• paigaldatud tükihulk: 4, 2
• Plokieraldus:
• Tootmise kuupäev alates: 06.02.2023
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MEY

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.01
• Nimetus: SW 33 10 8160
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Üldine informatsioon: impulse sender; crackshaft
• Tootja: VIKA

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.01
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• for OE number: 04C 907 601K, 958 907 601 00
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Hall Sensor
• Tootja: FAE ELEKTRYKA

• Number of pins: 2
• Tootja: DELPHI
• Nimetus: DE AS10169

• Installatsiooni pool: Esisild
• Hulk: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Nimetus: DE SS20794
• Tootja: DELPHI

• Installatsiooni pool: ees, sees, väljas
• Plokieraldus:
• Colour Code: GRU
• Colour: black
• Surface: primed
• Number of pins: 3
• Chemical Properties: Paintable
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Always compare old and new part (in particular OE No.):
• Tootja: TOPRAN HANS PRIES

kombineeritud PR-numbrile: GP1+7X2+K8B, GP1+7X2+K8D, GP1+7X2+K8X, GP1+7X5+K8B, GP1+7X5+K8D, GP1+7X5+K8X, GP1+7X2+K8B+2K3, GP1+7X2+K8D+2K3, GP1+7X2+K8B+2K7, GP1+7X2+K8D+2K7, GP1+7X5+K8B+2K3, GP1+7X5+K8D+2K3, GP1+7X5+K8B+2K7, GP1+7X5+K8D+2K7 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Nimetus: DETONATSIOONIANDUR
• Tootja: BOS

• Number of pins: 3
• Sensor Type: Hall Sensor
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Tootja: HUCO

• vajaminev tükihulk: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BREMI

• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Nimetus: Kaabli remondikomplekt, tagatuli
• Tootja: HBE

• General Information: pressure difference sender
• Tootja: BORSEHUNG

• Installatsiooni pool: ees, küljepoolne paigaldus
• PR-numbri jaoks: 7X5
• Colour Code: GRU
• Surface: primed
• Number of pins: 3
• Chemical Properties: Paintable
• for OE number: 5Q0 919 297B
• Supplementary Article/Supplementary Info: with gasket/seal
• Always compare old and new part (in particular OE No.):
• Tootja: TOPRAN

Vehicle Equipment: for vehicles with full-autom. park assist (parallel parking) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: väljas, vasakul, paremal, ees
• vajaminev tükihulk: 2
• Sõidukivarustus: sõidukitele poolautomaatse parkimisabi süsteemiga
• PR-numbri jaoks: 7X5
• Nimetus: Sensor, parkimisabi
• Tootja: TRI

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Tootja: VALEO

• Installatsiooni pool: väljas, taga, sees, küljepoolne paigaldus, ees
• Plokieraldus:
• PR-numbri jaoks: 7X5, 7X2
• Colour Code: GRU
• Colour: black
• Surface: primed
• Chemical Properties: Paintable
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Always compare old and new part (in particular OE No.):
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: kahepoolne
• Anduritüüp: Ultraheliandur
• OE-numbri jaoks: 000 905 55 04
• keem.omadus: värvitav
• Garantii: 3 aastat garantii
• Pikkus (mm): 74
• Pinge [V]: 12
• Korpuse materjal: Plastik
• Kaal (g): 29
• Laius (mm): 46
• Kõrgus (mm): 26
• Rakendustüüp: elektriline
• Tootja: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Mootorikood: CWGD
• Number of pins: 2
• Colour: black
• Nimetus: Detonatsiooniandur
• Tootja: VDO

• tootmise kuupäev kuni: 17.07.2023
• Tootja: DR.MOTOR AUTOMOTIVE

• Heitgaaside normatiiv: Euro 5
• Manufacturer Restriction: VAG
• Number of pins: 4
• Cable Length [mm]: 175
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Nimetus: Kaabli remondikomplekt, ohumassimootja
• Tootja: HBE

• Frequency Range [MHz]: 433
• Valve colour: black, silver
• Tightening Torque [Nm]: 8
• Mounting Type: Bolted
• Supplementary Article/Info 2: with groove, with valves
• Permissible maximum speed [km/h]: 250
• Housing Colour: black
• Nimetus: Rattaandur, rehvirohu kontrollssteem
• Tootja: SKF

• Ehitusaasta kuni: 11.2019
• vajaminev tükihulk: 2
• Installatsiooni pool: kahepoolne, väljas
• Sõidukivarustus: sõidukitele poolautomaatse parkimisabi süsteemiga
• PR-numbri jaoks: 7X5
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: mounting
• Socket colour: beige
• Assy./disassy. by qualified personnel required!:
• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Nimetus: HE 6PX358270471
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Installatsiooni pool: ees, väljas
• Manufacturer Restriction: Renault, VAG
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Plug Type ID: Code B
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Nimetus: Kaabliparanduskomplekt, olisurvelliti
• Tootja: HBE

• Ehitusaasta kuni: 09.2017
• Tehnilisi andmeid jälgida:
• Manufacturer Restriction: VAG
• Cable Length [mm]: 200
• Number of pins: 6
• Socket Width [mm]: 1.6
• Cable Cross Section [mm²]: 0.75
• Supplementary Article/Info 2: with plug
• Supplementary Article/Supplementary Info: with gaskets/seals
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug housing
• SVHC: No SVHC present!
• Nimetus: Kaabli remondikomplekt, rattap””rete andur
• Tootja: HBE

Tootja: BOSCH

• Fitting Position: Rear, outer, inner
• Supplementary Article/Supplementary Info: with gasket/seal
• Chemical Properties: Paintable
• Tootja: FAE ELEKTRYKA

• Üldine informatsioon: pressure sensor
• Tootja: VIKA

• Ehitusaasta kuni: 11.2019
• vajaminev tükihulk: 4
• Installatsiooni pool: kahepoolne, sees, ees
• PR-numbri jaoks: 7X2, 7X5
• Number of pins: 3
• Chemical Properties: Over-paintable
• Mounting Type: Plugged
• Socket colour: black
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PX358141711
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Ultrasonic Sensor
• Fitting Position: inner, outer, Rear
• Chemical Properties: Paintable
• Tootja: FAE ELEKTRYKA

• Installatsiooni pool: ees vasakul, taga vasakul
• tootmise kuupäev kuni: 30.07.2018
• PR-numbri jaoks: 4F2, 4F6, 4I3
• Plokieraldus:
• Tootmise kuupäev alates: 30.07.2018
• Fitting Position: Vehicle Door
• Vehicle Equipment: for vehicles with keyless Entry/Go system
• Number of pins: 2
• Connector Shape: oval
• Input Voltage [V]: 5
• Length [mm]: 113
• Width [mm]: 25
• Colour: black
• Tootja: TOPRAN

vasak/paremroolimine: vasakpoolse roolimise jaoks, parempoolse roolimise jaoks kombineeritud PR-numbrile: 2F0+4F2, 2F0+4F6, 2F0+4I3, 2F1+4F2, 2F1+4F6, 2F1+4I3 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Mootoriplokk
• Pistikkontaktide arv: 2
• Tootja: METZGER

• vajaminev tükihulk: 2
• Installatsiooni pool: Tagasild
• Supplementary Article/Info 2: without cable
• Length [mm]: 76.5
• MAPP code available:
• Tootja: ATE

• vajaminev tükihulk: 2
• Installatsiooni pool: Esisild
• Supplementary Article/Info 2: without cable
• Length [mm]: 80.8
• MAPP code available:
• Tootja: ATE

• Lambda andur: Bistabiilne andur
• Installatsiooni pool: ees
• Üldine informatsioon: lambda probe; front
• Tootja: VIKA

• Installatsiooni pool: Tagasild
• Length [mm]: 77
• Sensor Type: Active sensor
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!