• Number of pins: 4
• Supplementary Article/Info 2: without cable
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 6
• Supplementary Article/Info 2: without cable, with plastic socket
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: with plug, without cable
• for OE number: 4D0971993
• Number of pins: 3
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 4D0971993
• Supplementary Article/Info 2: with plug, with cable
• Number of pins: 3
• Nimetus: Kaabliparanduskomplekt, ktuserohu andur
• Tootja: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Mootorikood: CZHA
• Värv: must
• Pistikute teostus: Kruvikontakt
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Mootorikood: CZHA
• Värv: must
• Pistikute teostus: Kruvikontakt
• Tootja: FACET

• Number of pins: 3
• Nimetus: DE SS12308-12B1
• Tootja: DELPHI

• Mootorikood: CZHA
• Thread Size: M12x1,5
• Spanner Size: 16
• Tootja: FACET

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MEY

• tootmise kuupäev kuni: 14.06.2021
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MEY

• Number of pins: 3
• Tootja: JPN

• vajaminev tükihulk: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BREMI

• General Information: pressure difference sender
• Tootja: BORSEHUNG

• Ehitusaasta alates: 10.2019
• Overall Length [mm]: 70
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Spanner Size: 16
• Sensor Type: NTC Sensor
• Weight [kg]: 0.038
• Tootja: VALEO

Tootja: BOSCH

• Number of pins: 3
• Pressure from [kPA]: 50
• Tootja: DELPHI ELEKTRONIKA

• Mootorikood: CZHA, CZHA/DEUA
• vajaminev tükihulk: 1
• Pressure from [kPA]: 29
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.48
• Nimetus: EP 1.993.327
• Tootja: EPS

• Mootorikood: CZHA, CZHA/DEUA
• vajaminev tükihulk: 1
• Pressure from [kPA]: 29
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.48
• Tootja: FACET

• Mootorikood: CZHA, CZHA/DEUA
• Väljalaskesüsteem: enne tahmafiltrit
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Tootja: FACET

• vajaminev tükihulk: 1
• Mootorikood: CZHA, DEUA
• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Nimetus: ANDUR,NUKKVOLLIPOSITSIOON
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Heitgaaside normatiiv: Euro 5
• Manufacturer Restriction: VAG
• Number of pins: 4
• Cable Length [mm]: 175
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Nimetus: Kaabli remondikomplekt, ohumassimootja
• Tootja: HBE

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 1
• for OE number: 04L906051B
• Tootja: MEAT&DORIA

• General Information: pressure sensor
• Tootja: VIKA

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 2
• Quality: OE EQUIVALENT
• for OE number: 03L906051B
• Tootja: MEAT & DORIA

• PR-numbri jaoks: T98
• Number of pins: 3
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Tootja: HUCO

• Housing Type: with housing
• Housing material: Plastic
• Voltage [V]: 12
• Length [mm]: 110
• Fabrication Number: EPP-AU-016
• Tootja: NTY

Tootja: NRF

• Ehitusaasta alates: 10.2019
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 420
• Overall Length [mm]: 560
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Weight [kg]: 0.08
• Nimetus: VA 368919
• Tootja: VALEO

• Socket colour: black
• Fabrication Number: EGT-AU-054
• Cable Length [mm]: 490
• Tootja: NTY

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.24
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 07SKV159

• Väljalaskesüsteem: enne tahmafiltrit
• Number of pins: 3
• Opening pressure [kPa]: 14
• Tootja: DELPHI

• Väljalaskesüsteem: enne tahmafiltrit
• Mootorikood: CZHA, DEUA
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PP009409161

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 750
• Overall Length [mm]: 900
• Number of pins: 2
• Connector Shape: oval
• Socket colour: Orange
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Weight [kg]: 0.09
• Nimetus: VA 368926
• Tootja: VALEO

• vajaminev tükihulk: 1
• Mootorikood: CZHA, DEUA
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Nimetus: Andur, heitgaasisurve
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• General Information: pressure sensor
• Tootja: VIKA

• Thread Size: M18 x 1,5
• Spanner Size: 27
• Number of pins: 3
• Nimetus: Andur,ktuserohk
• Tootja: MEY

• Mootorikood: DEUA
• Kvaliteediklass: PJ
• Nimetus: Air flow sensor

• Ehitusaasta alates: 10.2019
• Ehitusaasta kuni: 06.2021
• Mootorikood: DEUA
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: VAL

• vajaminev tükihulk: 1
• Installatsiooni pool: enne heitgaaside turbokompressorit
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 25
• Cable Length [mm]: 892
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Nimetus: Andur, heitgaasitemperatuur
• Tootja: NRF

• Nimetus: Andur, heitgaasisurve
• Tootja: BOS

• Väljalaskesüsteem: enne tahmafiltrit
• for OE number: 03L 906 051 B
• Number of mounting bores: 1
• Number of circuits: 2
• Connector Shape: D Shape
• Weight [kg]: 0.029
• Number of pins: 3
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: DEUA
• Weight [kg]: 0.014
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Heitgaaside normatiiv: Euro 6
• Installatsiooni pool: pärast tahmafiltrit
• PR-numbri jaoks: 7MM
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 30
• Cable Length [mm]: 715
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Tootja: NRF

• Ehitusaasta kuni: 12.2017
• Installatsiooni pool: enne heitgaaside turbokompressorit
• vajaminev tükihulk: 1
• Mootorikood: CZHA, DEUA
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 892
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA ELEKTRYKA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: CZHA, CZHA/DEUA
• vajaminev tükihulk: 1
• Korpusetüüp: koos korpusega
• Length [mm]: 110
• Inner Diameter [mm]: 80
• Outer Diameter [mm]: 80
• Nimetus: EP 1.991.446
• Tootja: EPS

• Ehitusaasta alates: 11.2017
• Installatsiooni pool: katalüsaatori ees
• vajaminev tükihulk: 1
• Mootorikood: CZHA, DEUA
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 497
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PT358226281
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Installatsiooni pool: pärast tahmafiltrit
• vajaminev tükihulk: 1
• Mootorikood: CZHA, DEUA
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 750
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PT358226311
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Installatsiooni pool: pärast tahmafiltrit
• Number of pins: 2
• Cable Length [mm]: 800
• Sensor Type: PTC
• Nimetus: Andur, heitgaasitemperatuur
• Tootja: MEY

• Ehitusaasta alates: 12.2017
• Installatsiooni pool: katalüsaatori ees
• Tootja: BOSCH

• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Hulk: 1
• Cable Length [mm]: 831
• Oxygen Sensor: Broadband oxygen sensor, Heated
• Nimetus: SONDA LAMBDA AUDI A4, A5, A6, Q5 13-
• Tootja: DLP

• PR-numbri jaoks: T98
• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Tootja: METZGER

• Mootorikood: DEUA
• Resistor Type: Hot-wire Sensor
• Number of connectors: 4
• Weight [kg]: 0.18
• Housing Type: with housing
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: enne heitgaaside turbokompressorit
• Tootja: BOSCH

• Installatsiooni pool: katalüsaatori ees
• External Thread Size: M14 x 1,5
• Number of connectors: 2
• Cable Length [mm]: 497
• Weight [kg]: 0.057
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Tootja: DELPHI

• vajaminev tükihulk: 1
• Mootorikood: CZHA, DEUA
• Mounting Type: Pipe-neck
• Number of pins: 4
• Suction pipe connector diameter [mm]: 80
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Tootja: HELLA
• Nimetus: HE 8ET009149441

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Tootja: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Nimetus: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Installatsiooni pool: Heitgaaside turbokompressor
• Number of pins: 2
• Cable Length [mm]: 940
• Sensor Type: PTC
• Nimetus: Andur, heitgaasitemperatuur
• Tootja: MEY

• vajaminev tükihulk: 1
• Voltage [V]: 12
• Number of pins: 5
• Tootja: BREMI

• Fitting Position: Fuel Rail
• Number of pins: 3
• Socket colour: black
• Thread Size: M18x1,5
• Tootja: METZGER

• Recommended additional repairs: Air Filter
• Nimetus: OHUMASSIMOOTJA
• Tootja: BOS

• Fitting Position: Fuel Line
• Number of pins: 4
• Number of connectors: 2
• Socket colour: black
• Tootja: METZGER

• Cable Length [mm]: 1,010
• Number of pins: 5
• Fabrication Number: ENOX-AU-012
• Tootja: NTY

• Väljalaskesüsteem: enne tahmafiltrit
• OE-numbri kontrollimine:
• Voltage [V]: 12
• Cable Length [mm]: 1,010
• Number of pins: 5
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.35
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 71SKV024
• Tootja: ESEN SKV

Fitting Position: before catalytic converter, after catalytic converter

• Installatsiooni pool: pärast tahmafiltrit
• Nimetus: NOx-sensor, karbamiidipritse
• Tootja: BOS

• kombineeritud PR-numbrile: TD1+7CF, TD1+7MM, TD1+7MW
• Fitting Position: before soot particulate filter
• Tootja: METZGER

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring

• Väljalaskesüsteem: enne tahmafiltrit
• Connector Shape: D Shape
• Number of pins: 3
• Pressure [Pa] from: -14,000
• Pressure [Pa] to: 100,000