• Number of pins: 4
• Supplementary Article/Info 2: without cable
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 6
• Supplementary Article/Info 2: without cable, with plastic socket
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: with plug, without cable
• for OE number: 4D0971993
• Number of pins: 3
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 4D0971993
• Supplementary Article/Info 2: with plug, with cable
• Number of pins: 3
• Nimetus: Kaabliparanduskomplekt, ktuserohu andur
• Tootja: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Thread Size: M 12x1.5
• Number of pins: 2
• Housing Colour: brown
• Tootja: FAE

• Mootorikood: DEUB
• Värv: hall
• Thread Size: M12x1,5
• Spanner Size: 17
• Nimetus: ANDUR, KšTUSETEMPERATUUR
• Tootja: EPS

• for OE number: 04E 919 501 B
• Width [mm]: 67
• Height [mm]: 68
• Length [mm]: 40
• Weight [g]: 26
• Guarantee: 3 years guarantee
• Number of pins: 2
• Operating Mode: Electric
• Voltage [V]: 12
• Tootja: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Mootorikood: DEUB
• Värv: must
• Pistikute teostus: Kruvikontakt
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• tootmise kuupäev kuni: 05.06.2018
• Number of pins: 3
• Fitting Position: Cylinder Head
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mootorikood: DEUB
• Värv: must
• Pistikute teostus: Kruvikontakt
• Tootja: FACET

• Sensor Type: NTC Sensor
• Number of pins: 2
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Connector Shape: oval
• Spanner Size: 17
• Bolt Head-/Nut Design: Male Star
• Supplementary Article/Info 2: with seal ring
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Nimetus: DE SS12308-12B1
• Tootja: DELPHI

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 17
• for OE number: 04L919824C
• Tootja: MEAT&DORIA

• Mootorikood: DEUB
• Thread Size: M12x1,5
• Spanner Size: 16
• Tootja: FACET

• Fabrication Number: ECP-VW-009
• Tootja: NTY

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MEY

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MEY

• Fabrication Number: ECM-AU-005
• Tootja: NTY
• Nimetus: NTY ECM-AU-005

• Number of pins: 3
• Tootja: JPN

• Mootorikood: DEUB
• vajaminev tükihulk: 1
• Tootja: FACET

• PR-numbri jaoks: TM4, TD1
• Number of circuits: 3
• Plug Type: Butt Joint
• Cable Length [mm]: 200
• Wire cross-section [mm²]: 0,5
• Tootja: METZGER

• vajaminev tükihulk: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BREMI

• Number of connectors: 3
• Material: Plastic
• Nimetus: Andur, heitgaasisurve
• Tootja: MAX

• General Information: pressure difference sender
• Tootja: BORSEHUNG

• Outer Diameter [mm]: 12
• Number of connectors: 3
• Weight [kg]: 0.015
• for OE number: 05E 907 601 D
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fuel Mixture Formation: Direct Injection
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV409

• Overall Length [mm]: 70
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Spanner Size: 16
• Sensor Type: NTC Sensor
• Weight [kg]: 0.038
• Tootja: VALEO

Tootja: BOSCH

• Number of pins: 3
• Cable Length [mm]: 500
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 0.5
• Supplementary Article/Supplementary Info: with shrink/solder connector
• for OE number: 4D0971993
• Tootja: MEAT&DORIA

• Number of pins: 3
• Pressure from [kPA]: 50
• Tootja: DELPHI ELEKTRONIKA

• for OE number: 04L 906 051 C
• Number of pins: 3
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Number of circuits: 1
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV664

• Mootorikood: DEUB
• vajaminev tükihulk: 1
• Pressure from [kPA]: 29
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.48
• Nimetus: EP 1.993.327
• Tootja: EPS

• Mootorikood: DEUB
• vajaminev tükihulk: 1
• Surve alates [kPA]: 29
• Surve kuni [kPA]: 400
• Väljundpinge alates [V]: 0,25
• Väljundpinge kuni [V]: 4,48
• Tootja: FACET

• Mootorikood: DEUB
• Väljalaskesüsteem: enne tahmafiltrit
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Tootja: FACET

• Mootorikood: DEUB
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 17SKV352
• Tootja: ESEN SKV

• vajaminev tükihulk: 1
• Mootorikood: DEUB
• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Nimetus: ANDUR,NUKKVOLLIPOSITSIOON
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Heitgaaside normatiiv: Euro 5
• Manufacturer Restriction: VAG
• Number of pins: 4
• Cable Length [mm]: 175
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Nimetus: Kaabli remondikomplekt, ohumassimootja
• Tootja: HBE

• Number of pins: 3
• Pressure [Pa] from: 48,500
• Pressure [Pa] to: 400,000
• Tootja: FAE

• Fitting Position: Exhaust Turbocharger
• Number of pins: 3
• Connector Shape: D Shape
• Sensor Type: NTC Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic), PBT
• Components deviate from OE:
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 1
• for OE number: 04L906051B
• Tootja: MEAT&DORIA

• PR-numbri jaoks: TM4, TD1
• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Socket Width [mm]: 2.8
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Nimetus: Kaabli remondikomplekt, andur (ohuvotu rohk)
• Tootja: HBE

• Väljalaskesüsteem: enne tahmafiltrit
• Connector Shape: D Shape
• Number of pins: 3
• Pressure [Pa] from: -14,000
• Pressure [Pa] to: 100,000
• Nimetus: Andur, heitgaasisurve
• Tootja: NRF

• General Information: pressure sensor
• Tootja: VIKA

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 2
• Quality: OE EQUIVALENT
• for OE number: 03L906051B
• Tootja: MEAT & DORIA

• Number of pins: 3
• Nimetus: ANDUR, HEITGAASISURVE
• Tootja: MEY

• PR-numbri jaoks: T98
• Number of pins: 3
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Tootja: HUCO

• Fitting Position: Left, Fuel Rail
• Thread Size: M 18
• Thread Pitch [mm]: 1.5
• Thread Length [mm]: 12.5
• Spanner Size: 27
• Operating Pressure [bar]: 2,000
• Number of pins: 3
• Mounting Type: Bolted
• Connector Shape: D Shape
• Housing Colour: black
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Housing Type: with housing
• Housing material: Plastic
• Voltage [V]: 12
• Length [mm]: 110
• Fabrication Number: EPP-AU-016
• Tootja: NTY

• Fuel Mixture Formation: Common Rail (CR)
• Pressure to [bar]: 2,200
• Number of pins: 3
• Socket colour: black
• Tootja: FAE ELEKTRYKA

Tootja: NRF

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 420
• Overall Length [mm]: 560
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Weight [kg]: 0.08
• Nimetus: VA 368919
• Tootja: VALEO

• Fabrication Number: EGT-AU-038
• Cable Length [mm]: 750
• Tootja: NTY

Lisainfo: ENG. 2.0TDI AUDI B9 15- /ZA FILTREM CZ¸STEK STAœYCH

• Socket colour: black
• Fabrication Number: EGT-AU-054
• Cable Length [mm]: 490
• Tootja: NTY

• Väljalaskesüsteem: enne tahmafiltrit
• Number of pins: 3
• Opening pressure [kPa]: 14
• Nimetus: DE DPS00020
• Tootja: DELPHI

• for OE number: 04L 907 601
• Width [mm]: 67
• Height [mm]: 68
• Length [mm]: 40
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [g]: 150
• Operating Mode: Electric
• Housing material: Plastic
• Tootja: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.24
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 07SKV159

• Väljalaskesüsteem: enne tahmafiltrit
• Mootorikood: DEUB
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: after soot particulate filter
• Component Number: G 527, G 648
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: Orange
• Sensor Type: PTC
• Cable Length [mm]: 810
• Overall Length [mm]: 940
• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Connector Shape: D Shape
• Connecting plug material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Info 2: with cable
• Housing material: Stainless Steel
• Bolt Head-/Nut Design: Hexagon
• Shape: straight
• Line insulation design: with silicone-coated woven-fibre insulation
• Tootja: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Nimetus: Kaabli remondikomplekt, heitgaasi rohuandur
• Tootja: HBE

• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.03
• for OE number: 03L 906 051 D
• Nimetus: ANDUR, HEITGAASISURVE
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 750
• Overall Length [mm]: 900
• Number of pins: 2
• Connector Shape: oval
• Socket colour: Orange
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Weight [kg]: 0.09
• Nimetus: VA 368926
• Tootja: VALEO

• for OE number: 03L 906 051 B
• Width [mm]: 75
• Length [mm]: 85
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Height [mm]: 80
• Weight [g]: 100
• Housing material: Plastic
• Operating Mode: Electric
• Tootja: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Thread Size: M18 x 1,5
• Spanner Size: 27
• Number of pins: 3
• Nimetus: Andur,ktuserohk
• Tootja: MEY

• for OE number: 03L 906 461 A
• Tootja: KAMOKA

• vajaminev tükihulk: 1
• Mootorikood: DEUB
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Nimetus: Andur, heitgaasisurve
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.03
• for OE number: 03L 906 051 D
• Nimetus: SW 30 10 0853
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 8W0 906 088 F
• Overall Length [mm]: 880
• Cable Length [mm]: 750
• Number of pins: 2
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: after soot particulate filter
• Socket colour: beige
• Weight [kg]: 0.09
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 30SKV394

• Kvaliteediklass: PJ
• Nimetus: Air flow sensor

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: VAL

• Kontrolltähistus: T98
• Number of pins: 3
• Tootja: MEYLE

• vajaminev tükihulk: 1
• Installatsiooni pool: enne heitgaaside turbokompressorit
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 25
• Cable Length [mm]: 892
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Nimetus: Andur, heitgaasitemperatuur
• Tootja: NRF

• Väljalaskesüsteem: enne tahmafiltrit
• for OE number: 03L 906 051 B
• Number of mounting bores: 1
• Number of circuits: 2
• Connector Shape: D Shape
• Weight [kg]: 0.029
• Number of pins: 3
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: DEUB
• Weight [kg]: 0.014
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Nimetus: Andur, heitgaasisurve
• Tootja: BOS

• Number of pins: 3
• Connector Shape: D Shape
• Thread Size: M18 x 1,5
• Fuel Mixture Formation: Direct Injection
• Weight [kg]: 0.055
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 3
• External Thread [mm]: M18 X 1,5 MM
• Spanner Size: 27
• Tightening Torque [Nm]: 100
• Nimetus: Andur,ktuserohk
• Tootja: PIE

• Heitgaaside normatiiv: Euro 6
• Installatsiooni pool: pärast tahmafiltrit
• PR-numbri jaoks: 7MM
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 30
• Cable Length [mm]: 715
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Nimetus: Andur, heitgaasitemperatuur
• Tootja: NRF

• External Thread Size: M18 x 1,5
• Number of connectors: 3
• Weight [kg]: 0.06
• for OE number: 04L 906 054
• Nimetus: ANDUR,KšTUSEROHK
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: DEUB
• vajaminev tükihulk: 1
• Korpusetüüp: koos korpusega
• Length [mm]: 110
• Inner Diameter [mm]: 80
• Outer Diameter [mm]: 80
• Nimetus: EP 1.991.446
• Tootja: EPS

• Ehitusaasta kuni: 12.2017
• Installatsiooni pool: enne heitgaaside turbokompressorit
• vajaminev tükihulk: 1
• Mootorikood: DEUB
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 892
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA ELEKTRYKA

Brief Information: *** HELLA Electronics OE competence for over 60 years.