Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
Lisainfo: Rubber mount for wishbone, front, outer
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, inner -
Mounting Type: Rubber-
Metal Mount - Tootja: JP GROUP
-
Lisainfo: Control Arm-
/ Trailing Arm Bush
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.12
-
Nimetus: DY 37-
27211 - Tootja: DYS
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Outer Diameter [mm]: 44
- Inner Diameter [mm]: 12
- Width [mm]: 37
- Axle alignment required after fitting:
- Tootja: TOPRAN
Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, outer General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right, inner, Upper -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 46.4
- Inner Diameter [mm]: 10.2
- Width [mm]: 50
- Quantity per axle: 4
- Replace in pairs only:
- Axle alignment required after fitting:
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle,
Upper -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.11
-
Nimetus: DY 37-
25933 - Tootja: DYS
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.11
-
Nimetus: DY 37-
27212 - Tootja: DYS
-
Fitting Position: outer,
Lower, Front Axle Left, Front Axle Right - Outer Diameter 1 [mm]: 44
- Inner Diameter 1 [mm]: 12
- Thickness 1 [mm]: 45
- Tootja: BGA
-
Installatsiooni pool: paremal,
vasakul, väljas - Fitting Position: Front Axle
- Total Length [mm]: 45
- Outer Diameter [mm]: 44
- Inner Diameter [mm]: 12.1
- Nimetus: COC 80004748
- Tootja: CORTECO
- Thickness [mm]: 28
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 36
-
Material: Rubber/
Metal - Shape: slotted
- Weight [kg]: 0.043
- Tootja: FEBI
Fitting Position: Rear Axle Left, Upper, Front, Centre, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.24
-
Nimetus: DY 37-
26233 - Tootja: DYS
- for OE number: 4E0407181D
- Tootja: GSP ZAWIESZENIE
Installatsiooni pool: väljas, all, esisild vasakul, esisild paremal, esisild alla
-
Installatsiooni pool: all,
ees, taga, üleval - Plokieraldus:
- Weight [kg]: 0.105
- Inner Diameter [mm]: 12
- Required quantity: 2
- Outer Diameter [mm]: 46.3
-
Fitting Position: outer,
both sides, Rear Axle - Control/Trailing Arm Type: for control arm
- Nimetus: TG TED43758
- Tootja: TEDGUM
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Kvaliteediklass: PJ
- Nimetus: Control arm bush left=right
-
Installatsiooni pool: esisild peal,
sees - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46
- Width [mm]: 50
- SVHC: No SVHC present!
- Nimetus: LU 829067010
- Tootja: FAG
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.04
-
Nimetus: DY 37-
23403 - Tootja: DYS
-
Installatsiooni pool: Esisild,
üleval - Tootja: GSP ZAWIESZENIE
-
Fitting Position: both sides,
inner, Rear, Rear Axle, Lower - Weight [kg]: 0.095
- Outer Diameter [mm]: 44.4
- Inner Diameter [mm]: 12
- Required quantity: 2
- Tootja: TEDGUM
- Šassii: sportvedrustusega sõidukile
- Length [mm]: 55
- Width [mm]: 51
- Thickness [mm]: 55
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
-
Material: Rubber/
Metal - Weight [kg]: 0.16
- Tootja: FEBI
Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: Esisild,
sees, all, ees - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 50
- Thickness 1 [mm]: 55
- Tootja: DELPHI
- Nimetus: DE TD838W
-
Installatsiooni pool: Esisild,
ees, all, väljas - PR-numbri jaoks: FN0
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12.1
- Outer Diameter [mm]: 44
- Width 1 [mm]: 45
- Width 2 [mm]: 37
- SVHC: No SVHC present!
- Nimetus: LU 829060710
- Tootja: FAG
- Fitting Position: Front Axle
- Control/Trailing Arm Type: for control arm
- Weight [g]: 111
- Nimetus: IM 1638
- Tootja: ORIGINAL IMPERIUM
- Šassii: ilma sportvedrustuseta sõidukitele
- Thickness [mm]: 54
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 45,
27 -
Material: Rubber/
Metal -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.154
- Observe service information:
- Tootja: FEBI BILSTEIN
Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 42
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 41
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Front, inner, Rear Axle Right - Shape: slotted
- Weight [kg]: 0.081
- Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: paremal,
vasakul, sees - Fitting Position: Front Axle
- Nimetus: COC 80001748
- Tootja: CORTECO
-
Fitting Position: Front Axle both sides,
Lower, outer, Front - Outer Diameter [mm]: 44
- Inner Diameter [mm]: 12.3
- Length [mm]: 45
- Weight [kg]: 0.104
- Tootja: RTS
-
Fitting Position: Upper,
Front Axle Left, Front Axle Right - Nimetus: COC 49107253
- Tootja: CORTECO
- Šassii: ilma sportvedrustuseta sõidukitele
- Thickness [mm]: 55
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 51,
27 -
Material: Rubber/
Metal -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.16
- Observe service information:
- Nimetus: SW 30 92 9944
- Tootja: SWAG
Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle both sides,
Lower, Front, outer - Inner Diameter [mm]: 13
- Outer Diameter [mm]: 44
- Height [mm]: 45
- Nimetus: ALT 84050AL
- Tootja: ALTE AUTOMOTIVE
-
Fitting Position: Front Axle,
Lower, inner - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- Height [mm]: 55
- Nimetus: ALT 86100AL
- Tootja: ALTE AUTOMOTIVE
-
Fitting Position: Front Axle,
outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.17
-
Nimetus: DY 37-
06144- 5 - Tootja: DYS
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Kvaliteediklass: PJ
- Nimetus: Control arm bush left=right
Lisainfo: "Tootja: TEKNOROT
AUDI A4 08-
(kvaliteediklass: PJ)"
- Thickness [mm]: 32
- Inner Diameter [mm]: 12.6
- Outer Diameter [mm]: 47
-
Material: Rubber/
Metal - Weight [kg]: 0.107
- Supplementary Article/Info 2: Requires special tools for mounting
- Tootja: FEBI
Fitting Position: Rear, Rear Axle Left, outer, Lower, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 42
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 43.5
-
Material: Rubber/
Metal -
Fitting Position: Rear,
Rear Axle Left, Rear Axle Right - Shape: slotted
- Weight [kg]: 0.099
- Supplementary Article/Info 2: Requires special tools for mounting
- Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
both sides, Lower, Front, inner - Control/Trailing Arm Type: for control arm
- Quantity per axle: 2
-
Article number of recommended accessories: 44252 01,
44400 01 - Observe service information:
- Tootja: LEMFÖRDER
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Lower
- General Information: bonded rubber bush
- Tootja: BORSEHUNG
-
Installatsiooni pool: Esisild,
väljas, all, ees - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 44
- Thickness 1 [mm]: 45
- Tootja: DELPHI
- Nimetus: DE TD723W
- Thickness [mm]: 50
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right - Weight [kg]: 0.115
- Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: Esisild,
sees, ees - Length [mm]: 55
- Outer Diameter [mm]: 35
- Inner Diameter [mm]: 12.2
- Tootja: TRW ZAWIESZENIE
SVHC: No information available, please contact the manufacturer!
-
Installatsiooni pool: kahepoolne,
taga, väljas - Fitting Position: Rear Axle
- Tootja: LEMFORDER
SVHC: No information available, please contact the manufacturer!
- Thickness [mm]: 42
- Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 45.5
-
Material: Rubber/
Metal - Shape: slotted
- Weight [kg]: 0.095
- Nimetus: SW 33 10 1621
- Tootja: SWAG
Fitting Position: both sides, Rear Axle Left, Lower, Front, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
- Height [mm]: 55
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
- Tootja: MEYLE
Fitting Position: inner, Front, Lower, Front Axle Left, Front Axle Right
-
Installatsiooni pool: Tagasild üleval,
ees, sees, Tagasild all - Plokieraldus:
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 40
- Width [mm]: 42
- SVHC: No SVHC present!
-
Tootja: FAG-
ELEMENTY ZAWIESZENIA
-
Installatsiooni pool: Tagasild üleval,
taga, väljas, Tagasild all - Plokieraldus:
- Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 45
- Width [mm]: 32
- SVHC: No SVHC present!
-
Tootja: FAG-
ELEMENTY ZAWIESZENIA
- Thickness [mm]: 40
- Inner Diameter [mm]: 12.6
- Outer Diameter [mm]: 45
-
Material: Rubber/
Metal - Weight [kg]: 0.093
- Tootja: FEBI
Fitting Position: Rear Axle Left, Upper, Front, outer, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: kahepoolne,
taga, sees - Fitting Position: Rear Axle
- Tootja: LEMFORDER
- Nimetus: LMI 4253401
SVHC: No information available, please contact the manufacturer!
-
Installatsiooni pool: Tagasild üleval,
taga, sees - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 42
- Width [mm]: 46
- SVHC: No SVHC present!
-
Tootja: FAG-
ELEMENTY ZAWIESZENIA
- Fitting Position: Lower
- General Information: bonded rubber bush
- Tootja: BORSEHUNG
- Fitting Position: Lower
- General Information: bonded rubber bush
- Tootja: VIKA
-
Fitting Position: Front Axle,
both sides, Lower, Front, outer - Control/Trailing Arm Type: for control arm
- Quantity per axle: 2
-
Article number of recommended accessories: 39097 01,
39364 01, 44252 01 - Observe service information:
- Tootja: LEMFORDER
- Nimetus: LMI 2712601
SVHC: No information available, please contact the manufacturer!
- Thickness [mm]: 50
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46
-
Material: Rubber/
Metal -
Fitting Position: Upper,
Front Axle Left, Front Axle Right - Weight [kg]: 0.305
-
Supplementary Article/Info 2: with bolts/
screws - Supplementary Article/Supplementary Info: with nuts
- Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 45
- Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 43.8
-
Material: Rubber/
Metal - Weight [kg]: 0.108
- Tootja: FEBI
Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Lower, Rear - Inner Diameter [mm]: 13
- Outer Diameter [mm]: 75
- Height [mm]: 80
- Nimetus: ALT 91258AL
- Tootja: ALTE AUTOMOTIVE
-
Installatsiooni pool: Esisild,
sees, all, taga - Inner Diameter 1 [mm]: 13
- Outer Diameter 1 [mm]: 75
- Thickness 1 [mm]: 80
- Tootja: DELPHI
- Nimetus: DE TD1633W
-
Fitting Position: Rear Axle,
both sides, outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 47
- Inner Diameter [mm]: 13
- Height [mm]: 32
- Required quantity: 2
-
Guarantee: 3 years guarantee or up to 75,
000km - Tootja: METZGER
-
Installatsiooni pool: esisild alla,
sees, all - Tootja: GSP ZAWIESZENIE
- Fitting Position: Lower
- General Information: bonded rubber bush
- Tootja: VIKA
- Width [mm]: 75
- Thickness [mm]: 80
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 75
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Mounting Type: Hydro Mount
- Weight [kg]: 0.47
- Tootja: FEBI
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Outer Diameter [mm]: 75
-
Material: Rubber/
Metal - Mounting Type: Hydro Mount
-
Fitting Position: Front Axle,
Left, Right - Inner Diameter [mm]: 13
- Thickness [mm]: 80
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Width [mm]: 75
- Thickness [mm]: 80
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 75
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Mounting Type: Hydro Mount
- Weight [kg]: 0.47
- Nimetus: SW 30 93 8547
- Tootja: SWAG
- Lisainfo: 30 93 8547 SWA
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Mounting Type: Hydro Mount
-
Fitting Position: Front Axle,
both sides, Lower, Rear, inner - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 75
- Quantity per axle: 2
- Article number of recommended accessories: 45276 01
- Observe service information:
- Tootja: LEMFORDER
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle,
Lower -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.9
-
Nimetus: DY 37-
26162 - Tootja: DYS