• Pistikkontaktide arv: 2
• Värv: sinine
• Tootja: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins

• Kerenumber (VIN) alates: 44-J-200 100
• Pistikkontaktide arv: 3
• Lülituspunkt [°C]: 118
• Värv: pruun
• Lisainfo: Thermo switch for cooling system 118 C, M14x1.5

• Kerenumber (VIN) alates: 44-J-200 100
• Keermemõõt: M10x1
• Värv: must
• Pistikkontaktide arv: 1
• Võtmekaugus: 14
• Pikkus (mm): 25
• Tootja: DELLO AUTOMEGA

• Värv: must
• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: JP GROUP
• Lisainfo: Sender for oil temperature

• Keermemõõt: M10x1,0
• Värv: must
• Ühenduste arv: 1
• Kaal (kg): 0,019
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 025906041A
• Korpusevärv: sinine
• Tootja: KAMOKA

• Tootja: FAE
• Lisainfo: NRF32110

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ümar
• Pistikkontaktide arv: 1
• Võtmekaugus: 14
• Keermemõõt: M10x1
• OE-numbri jaoks: 027919501
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: NRF

• Pikkus (mm): 25
• Temperatuurivahemik kuni [°C]: 125
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 10,9
• Võtmekaugus: 14
• Ühenduste arv: 1
• Värvimarkeering: must
• Kaal (kg): 0,012
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Temperatuurivahemik kuni [°C]: 125
• Pikkus (mm): 25
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 10,9
• Võtmekaugus: 14
• Ühenduste arv: 1
• Värvimarkeering: must
• Kaal (kg): 0,012
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 99 90 1939
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Anduritüüp: NTC-andur
• Keermemõõt: M10x1,0
• Võtmekaugus: 13
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Pistikkontaktide arv: 1
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY
• Lisainfo: 1009190015

• Värvimarkeering: sinine
• Lülituspunkt [°C]: 95, 90
• OE-numbri jaoks: 893 959 481
• Pistikkontaktide arv: 2
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: MAX

• Mootorikood: 1B
• Keermemõõt: M10x1
• Võtmekaugus: 13
• Tootja: FACET

• Värv: sinine
• Pistikkontaktide arv: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Mootorikood: 1B
• Keermemõõt: M10x1
• Võtmekaugus: 13
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Kerenumber (VIN) kuni: 44-F-300 000, 44-F-300000
• Sisselülitamispunkt [°C]: 95
• Väljalülimispunkt (°C): 90
• Keermemõõt: M22x1,5
• Värv: sinine
• Pistikkontaktide arv: 2
• Pistikukatte kuju: nurgeline
• Tootja: DELLO AUTOMEGA

• Keermemõõt: M10x1.0
• Tootja: VERNET

• OE-numbri jaoks: 811959481
• Võtmekaugus: 29
• Tootja: KAMOKA

• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 2
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

Tootja: ERA

• Sõidukivarustus: Kliimaseadmega sõidukile
• Kerenumber (VIN) kuni: 44-L-031 531
• Anduritüüp: NTC-andur
• Värv: sinine
• Pistikkontaktide arv: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY

• OE-numbri jaoks: 191959481
• Võtmekaugus: 29
• Tootja: KAMOKA

• OE-numbri jaoks: A0015403045
• Värv: hall
• Võtmekaugus: 29
• Tootja: KAMOKA

• Ühenduste arv: 2
• Värv: sinine
• Kaal (kg): 0,015
• Piirangutega toode/piirangu info: hoidevedruga, koos tihendiga
• Tootja: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• vajaminev tükihulk: 1
• Temperatuurivahemik kuni [°C]: 125
• Väliskeere [mm]: M10 x 1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Värv: must
• Pistikkontaktide arv: 1
• Kaal (kg): 0,3
• pakendi pikkus [cm]: 12
• pakendi laius [cm]: 8
• pakendi kõrgus [cm]: 6

• Kõrgus (mm): 30
• Kaal (kg): 0,057
• Keermemõõt: M22x1,5
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 2
• Lülitamispunkt alates [°C]: 95
• Lülituspunkt kuni [°C]: 90
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Värv: must
• Korpusevärv: must
• Pistikkontaktide arv: 1
• Keermemõõt: M10X1
• Võtmekaugus: 14
• Nimetus: DE TS10256
• Tootja: DELPHI

• Ühenduste arv: 2
• Värv: sinine
• Kaal (kg): 0,015
• Piirangutega toode/piirangu info: koos tihendiga, hoidevedruga
• Nimetus: SW 30 93 4762
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Võtmekaugus: 29
• Värvimarkeering: hall
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• OE-numbri jaoks: 191 959 481 C
• Pistikkontaktide arv: 3
• Keermemõõt: M22x1,5
• Lülituspunkt [°C]: 95, 102
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: MAX
• Lisainfo: 21-0155

• Pikkus (mm): 37
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• OE-numbri jaoks: 025 906 041 A
• Piirangutega toode/piirangu info: koos tihendiga
• Värvimarkeering: sinine
• Pistikkontaktide arv: 2
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pikkus (mm): 29
• Keermemõõt: M22x1,5
• Lülituspunkt [°C]: 70, 75
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 2
• Lülitamispunkt alates [°C]: 75
• Lülituspunkt kuni [°C]: 70
• Kaal (kg): 0,066
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Keermemõõt: M20
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Tootja: ERA

• OE-numbri jaoks: 191 959 481 C
• Lülitamispunkt alates [°C]: 102
• Lülituspunkt kuni [°C]: 85
• Tootja: TRUCKTEC

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Pistiku värv: must
• Väljalülimispunkt (°C): 95, 92
• Lülituspunkt [°C]: 85, 102
• Keermemõõt: M22x1,5 mm
• Võtmekaugus: 29 mm
• OE-numbri jaoks: 6U0959481A
• Tootja: MEAT&DORIA

• Keermemõõt: M22 x 1,5
• Värv: valge
• Lüliti: Topelttermolüliti jaoks
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Lülitamispunkt alates [°C]: 102
• Lülituspunkt kuni [°C]: 85
• Kaal (kg): 0,077
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ühenduste arv: 2
• Värvimarkeering: sinine
• Lülituspunkt [°C]: 95, 90
• Kaal (kg): 0,035
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Töötemperatuur alates [°C]: 95, 102
• Töötemperatuur kuni [°C]: 84, 91
• Keermemõõt: M22x1.5
• Anduritüüp: lahtine anduri ehitusviis
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: VER

• Lülituspunkt [°C]: 84
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Lülituspunkt [°C]: 110
• Tootja: FAE
• Lisainfo: NRF35480

• Mudeliaasta alates: 1988
• Mudeliaasta kuni: 1989
• Kerenumber (VIN) alates: 44-J-200 100
• Kasutuspinge [V]: 12
• Lülitamispunkt alates [°C]: 91, 84
• Lülituspunkt kuni [°C]: 102, 95
• Võtmekaugus: 29
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Keermemõõt: M22 x 1,5
• Pistikkontaktide arv: 3
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: MEY

• Lülituspunkt [°C]: 120
• Tootja: FAE
• Lisainfo: 35520 NRF

• Väliskeerme mõõde: M22 x 1,5
• Võtmekaugus: 29
• Ühenduste arv: 3
• Värvimarkeering: hall
• temperatuurivahemik alates [°C]: 95, 102
• Temperatuurivahemik kuni [°C]: 84, 92
• Kaal (kg): 0,061
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: 22x1,5
• Pistikkontaktide arv: 3
• Tootja: FAE ELEKTRYKA

• Ühenduste arv: 2
• Värvimarkeering: hall
• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info: koos tihendiga, hoidevedruga
• Nimetus: SW 30 92 9318
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M22x1,5
• Lüliti: Topelttermolüliti jaoks
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Kliimatsoonid: kuuma kliimavööndi jaoks
• Lülitamispunkt alates [°C]: 102
• Lülituspunkt kuni [°C]: 85
• Kaal (kg): 0,076
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 3
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mootorikood: 1B
• Keermemõõt: M22x1,5
• Võtmekaugus: 29
• Nimetus: EP 1.850.605
• Tootja: EPS

• Keermemõõt: M22x1,5
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 2
• Lülitamispunkt alates [°C]: 98
• Lülituspunkt kuni [°C]: 93
• Kaal (kg): 0,064
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: 1B
• Hoiatustemperatuur (°C): 110
• Keermemõõt: M10x1
• Võtmekaugus: 22
• Nimetus: EP 1.840.085
• Tootja: EPS

• Keermemõõt: M22x1.5
• Pistikkontaktide arv: 3
• Väändejõud [Nm]: 50
• Piirangutega toode/piirangu info: koos tihendiga
• Sisselülitamispunkt [°C]: 102, 95
• Väljalülimispunkt (°C): 84, 91
• pakendi laius [cm]: 3,5
• pakendi pikkus [cm]: 3,7
• Netokaal [g]: 62
• pakendi kõrgus [cm]: 7,2
• Tootja: MAHLE
• Nimetus: MH TSW31

• Keermemõõt: M10 x 1
• Temperatuurivahemik kuni [°C]: 110
• Tootja: ERA

• Sisselülitamispunkt [°C]: 102, 95
• Väljalülimispunkt (°C): 84, 91
• Piirangutega toode/piirangu info: koos tihendiga
• Keermemõõt: M 22 x 1,5 mm
• Tootja: WAHLER

• Lülituspunkt kuni [°C]: 84
• Väljalülimispunkt (°C): 91
• Lülitamispunkt alates [°C]: 95
• Lülituspunkt [°C]: 102
• Võtmekaugus: 29
• Tootja: VALEO
• Nimetus: VA 819769

• Kõrgus (mm): 65,4
• Kaal (kg): 0,096
• Lülituspunkt [°C]: 118
• Värv: pruun
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Lülitamispunkt alates [°C]: 118
• Lülituspunkt kuni [°C]: 113
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.