Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Kerenumber (VIN) kuni: 4B2031500
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Height [mm]: 37
-
Lisainfo: Wheel bearing kit,
for one front wheel
-
Veljesuurus (toll): 17,
18 - Kerenumber (VIN) kuni: 4B2031500
- Plokieraldus:
- Kerenumber (VIN) alates: 4B2031501
-
Fitting Position: Front Axle Left,
Front Axle Right -
Supplementary Article/Supplementary Info: with fastening/
mounting material - Supplementary Article/Info 2: with integrated wheel bearing
- Number of Holes: 4
- Tootja: JP GROUP
-
Lisainfo: Wheel bearing kit,
for one front wheel
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Supplementary Article/Info 2: with integrated wheel bearing
- Rim Hole Number: 5
- Tootja: JP GROUP
-
Lisainfo: Wheel hub with bearing,
rear
-
Fabrication Number: KLP-
AU- 004 - Rim Size [inch]: 16.0
- Tootja: NTY
-
Nimetus: NTY KLP-
AU- 004
Fitting Position: Rear Axle, Front Axle Left, Front Axle Right, Front Axle Transmission Type: 5-Speed Manual Transmission, 5-Speed Automatic Transmission, Manual Transmission
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Installatsiooni pool: esisild mõlemapoolselt
- Outer Diameter [mm]: 82
- Inner Diameter 1 [mm]: 45
- Inner Diameter 2 [mm]: 42.8
- Width [mm]: 37
- Bearing Type: Angular Ball Bearing
- Tootja: DELLO AUTOMEGA
- Fitting Position: Rear Axle
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Nimetus: Rattalaagrikomplekt
- Tootja: MAX
- Installatsiooni pool: Esisild
- Veljesuurus (toll): 16
- Ehitusaasta kuni: 09.2001
-
Kerenumber (VIN) kuni: 4B-
2- 031500 - Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Tootja: DENCKERMANN ZAWIESZENIE
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Width 1 [mm]: 37
- Outer Diameter 1 [mm]: 82
- Inner Diameter 1 [mm]: 43
- Inner Diameter 2 [mm]: 45
- Tootja: GSP
- Fitting Position: Front Axle
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Bearing Type: Ball Bearing
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: MAX
- Installatsiooni pool: Esisild
- Kerenumber (VIN) kuni: 4B2031500
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Net weight [kg]: 1.04
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: NK
- Fitting Position: Front Axle
- Outer Diameter [mm]: 82
- Height [mm]: 37
- Inner Diameter [mm]: 43
- Weight [kg]: 0.768
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Kerenumber (VIN) kuni: 4B-
2- 031 500 -
mitte PR-numbrile: H2U,
H3Y, H6M, H8A - Plokieraldus:
- Width [mm]: 37
- Outer Diameter [mm]: 82
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 43
- Supplementary Article/Info 2: with screw
- Inner Diameter 2 [mm]: 45
-
Lisainfo: Wheel bearing kit,
for one front wheel
- Rehvimõõt: 16
-
Kerenumber (VIN) kuni: 4B-
2- 031500 - Ehitusaasta kuni: 09.2001
- Installatsiooni pool: Esisild
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter 1 [mm]: 82
- Tootja: METELLI LOZYSKA KOLA PIASTY
- Ehitusaasta kuni: 09.2001
-
Kerenumber (VIN) kuni: 4B-
2- 031500 - Veljesuurus (toll): 16
- Installatsiooni pool: Esisild
- vajaminev tükihulk: 2
- Tootja: DRIVE
- Installatsiooni pool: esisild mõlemapoolselt
-
Kerenumber (VIN) kuni: 4B-
2- 031 500 -
Fitting Position: Front Axle,
Rear Axle - Guarantee: 4 years guarantee
- Weight [kg]: 1.87
- Bolt Hole Circle Ø 1 [mm]: 112
- Always compare old and new part (in particular OE No.):
- Tootja: SKV GERMANY
- Nimetus: CE 29SKV438
- Installatsiooni pool: Esisild
- Ehitusaasta kuni: 09.2001
-
Kerenumber (VIN) kuni: 4B-
2- 031500 - Veljesuurus (toll): 16
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Kvaliteediklass: PJ
- Nimetus: Wheel bearing kit
- Installatsiooni pool: Esisild
- Ehitusaasta kuni: 09.2001
-
Kerenumber (VIN) kuni: 4B-
2- 031500 -
Veljesuurus (toll): 16,
0 - Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Inner Diameter 1 [mm]: 45
- Tootja: OPTIMAL
- Fitting Position: Front Axle
- Width [mm]: 37
- Weight [kg]: 0.84
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Tootja: METALCAUCHO
- Ehitusaasta kuni: 09.2001
-
Kerenumber (VIN) kuni: 4B-
2- 031500 -
Veljesuurus (toll): 16,
0 - Outer Diameter [mm]: 82
- Quantity Unit: Set
- Inner Diameter [mm]: 43
- Fitting Position: Front Axle
- Weight [kg]: 0.694
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Kerenumber (VIN) kuni: 4B_2_031500
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Varustusaste: Ch. >4B_2_031500
- OE-numbri jaoks: 4B0498625A
- Inner Diameter [mm]: 43
- Width 1 [mm]: 37
- Number of mounting bores: 1
- Nimetus: DA KWD1060
- Tootja: DAYCO
- Outer Diameter [mm]: 82
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right -
Fabrication Number: KLP-
AU- 006 -
Rim Size [inch]: 17.0,
18.0 - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Installatsiooni pool: Esisild
-
Veljesuurus (toll): 17,
18 - Supplementary Article/Info 2: without flange
- Width [mm]: 40.3
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Tootja: DENCKERMANN ZAWIESZENIE
- Lisainfo: W413307 DKM
- Ehitusaasta alates: 09.2001
-
Kerenumber (VIN) alates: 4B-
2- 031501 - Installatsiooni pool: Esisild
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 43
- Width [mm]: 40
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: MAX
- Installatsiooni pool: Esisild
- Alternative Repair Kit: 100 498 0037
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Height [mm]: 37
- Bearing Type: Ball Bearing
- Nimetus: RATTALAAGER
- Tootja: MEY
- Fitting Position: Front Axle
- Guarantee: 4 years guarantee
- Weight [kg]: 1.76
- Always compare old and new part (in particular OE No.):
- Tootja: SKV GERMANY
- Nimetus: CE 29SKV436
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Siseläbimõõt 1 [mm]: 43
- Siseläbimõõt 2 (mm): 45
-
Kaal (kg): 0,
84 - Välisläbimõõt 1 [mm]: 82
- Laius 1 (mm): 37
- Tootja: A.B.S.
- Fitting Position: Front Axle
- Guarantee: 4 years guarantee
- Weight [kg]: 1.7
- Number of Holes: 4
- Always compare old and new part (in particular OE No.):
- Tootja: SKV GERMANY
- Nimetus: CE 29SKV029
- Kerenumber (VIN) kuni: 4B2031500
- Fitting Position: Front Axle
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Height [mm]: 37
-
Thread Size: M16x1,
5x77 - Bearing Type: Ball Bearing
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Version: One
-
Thread Size: M12X1,
5 - Inner Diameter [mm]: 45
- Rim Hole Number: 4
- Inner Diameter 1 [mm]: 43
- Inner Diameter 2 [mm]: 45
- Tootja: GSP
-
Rehvimõõt: 17/
18 - Ehitusaasta kuni: 09.2001
- Installatsiooni pool: Esisild
- Width [mm]: 40.25
- Inner Diameter [mm]: 43
- Outer Diameter 1 [mm]: 84
- Outer Diameter 2 [mm]: 127
- Number of mounting bores: 4
- Tootja: METELLI LOZYSKA KOLA PIASTY
- Fitting Position: Front Axle
- Width [mm]: 41
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 95
- Inner Diameter 2 [mm]: 45
- Outer Diameter 2 [mm]: 130
- Tootja: DELLO AUTOMEGA
- Kerenumber (VIN) kuni: ******4B*2*031500
-
mitte PR-numbrile: H2U,
H3Y, H6M, H8A - Plokieraldus:
- Width [mm]: 37
-
Inner Diameter [mm]: 43,
45 - Outer Diameter [mm]: 82
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.202
-
Supplementary Article/Supplementary Info: with nuts,
with motor shaft screw - Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Kerenumber (VIN) alates: 4B2031501
-
Fitting Position: Rear Axle,
Rear Axle Left, Rear Axle Right -
Fabrication Number: KLT-
AU- 006 -
Rim Size [inch]: 17.0,
18.0 - Tootja: NTY
-
Nimetus: NTY KLT-
AU- 006
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Ehitusaasta kuni: 09.2001
-
Kerenumber (VIN) kuni: 4B-
2- 031500 - Installatsiooni pool: Esisild
- vajaminev tükihulk: 2
-
Veljesuurus (toll): 16,
0 - Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: SKF
-
Kerenumber (VIN) kuni: 4B-
2- 031 500 - PR-numbri jaoks: H2U
- Plokieraldus:
-
Kerenumber (VIN) alates: 4B-
2- 031 501 - Bearing Type: Angular Ball Bearing
- Drawer Guide: Angular Ball Bearing
- Fitting Position: Front Axle both sides
- Width [mm]: 40
- Outer Diameter 1 [mm]: 82
- Outer Diameter 2 [mm]: 85
- Inner Diameter 1 [mm]: 43
- Inner Diameter 2 [mm]: 45
- Tootja: JPN
- Installatsiooni pool: Esisild
- Width [mm]: 41
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 95
-
Thread Size: M12x1,
5 - Rim Hole Number: 4
- Net weight [kg]: 1.67
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: NK
-
Installatsiooni pool: esisild vasakul,
esisild paremal -
Thread Size: M12X1,
5 - Inner Diameter [mm]: 45
- Rim Hole Number: 4
- Inner Diameter 1 [mm]: 43
- Inner Diameter 2 [mm]: 45
- Tootja: GSP
- Installatsiooni pool: Esisild
-
Veljesuurus (toll): 17,
18 - Width [mm]: 40.3
- Inner Diameter [mm]: 43
- Kvaliteediklass: PJ
- Nimetus: Wheel hub
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Width [mm]: 37
-
Fitting Position: Front Axle Left,
Front Axle Right - Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Kerenumber (VIN) kuni: ******4B*2*031500
-
mitte PR-numbrile: H2U,
H3Y, H6M, H8A - Plokieraldus:
- Width [mm]: 37
-
Inner Diameter [mm]: 43,
45 - Outer Diameter [mm]: 82
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.202
-
Supplementary Article/Supplementary Info: with motor shaft screw,
with nuts - Nimetus: SW 30 10 0725
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Esisild
-
Kerenumber (VIN) kuni: 4B-
2- 031500 -
Veljesuurus (toll): 15,
0, 16, 0 - Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Width [mm]: 37
- SVHC: No SVHC present!
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: FAG
-
Installatsiooni pool: paremal,
Esisild -
Tootja: SNR /
NTN- SNR/ - Nimetus: SN R157.24
- Installatsiooni pool: Tagasild
- Tootja: DELLO AUTOMEGA
- Hulk: 2
-
Kerenumber (VIN) alates: 4B-
2- 031 501 -
Kerenumber (VIN) kuni: 4B-
2- 031 500 - Fitting Position: Front Axle
- Weight [kg]: 1.57
- Required quantity: 2
- Bearing Type: Angular Ball Bearing
- Inner Diameter [mm]: 45
- Width [mm]: 40
- Outer Diameter 1 [mm]: 82
- Outer Diameter 2 [mm]: 85
- Inner Diameter 1 [mm]: 43
- General Information: wheel bearing; front
- Tootja: VIKA
-
Veljesuurus (toll): 18,
17 - Installatsiooni pool: Esisild
- vajaminev tükihulk: 2
- Tootja: DRIVE
- Supplementary Article/Info 2: with wheel hub
-
Fabrication Number: KLT-
AU- 002 - Tootja: NTY
Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right, Front Axle
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Ehitusaasta kuni: 09.2001
- Installatsiooni pool: Esisild
- vajaminev tükihulk: 2
-
Kerenumber (VIN) kuni: 4B-
2- 031500 - Veljesuurus (toll): 16
- Weight [kg]: 1.056
- Packaging length [cm]: 10.9
- Packaging width [cm]: 8.4
- Packaging height [cm]: 10.9
- Outer Diameter [mm]: 82
- Inner Diameter [mm]: 43
- Width [mm]: 37
-
Tootja: CONTITECH-
LOÅ»YSKA KÃÅ
- for OE number: 8E0 498 625 A
- Fitting Position: Front Axle both sides
- Tootja: TRUCKTEC
- Installatsiooni pool: Tagasild
- Flange Diameter [mm]: 131
- Supplementary Article/Info 2: with ABS sensor ring
- Rim Hole Number: 5
- Tootja: DENCKERMANN PIASTY LOZYSKA KOL
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 131
- Braking/Drive Dynamics: for vehicles with ABS
- Guarantee: 4 years guarantee
- Weight [kg]: 3.3
- Number of Holes: 5
- Bolt Hole Circle Ø 1 [mm]: 108
- Always compare old and new part (in particular OE No.):
- Tootja: SKV GERMANY
- Nimetus: CE 29SKV009
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal -
Thread Size: M14X1,
5 - Number of Teeth, ABS ring: 45
- Outer Diameter [mm]: 131
- Rim Hole Number: 5
- Supplementary Article/Info 2: with ABS sensor ring
- Tootja: GSP
- Installatsiooni pool: Tagasild
- Rim Hole Number: 5
- Supplementary Article/Info 2: with ABS sensor ring
- Outer Diameter [mm]: 131
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: MAX
-
Lisainfo: 2444/
MG
- Installatsiooni pool: Esisild
- Ehitusaasta alates: 09.2001
-
Kerenumber (VIN) alates: 4B-
2- 031501 - Plokieraldus:
- Ehitusaasta kuni: 09.2001
-
Kerenumber (VIN) kuni: 4B-
2- 031500 -
Veljesuurus (toll): 17,
0, 18, 0 - Width [mm]: 40.2
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 85
- Width 1 [mm]: 37
- Supplementary Article/Info 2: without wheel hub
- Inner Diameter 2 [mm]: 45
- Nimetus: Rattalaagrikomplekt
- Tootja: OPT
-
Veljesuurus (toll): 17,
0, 18, 0 - Kerenumber (VIN) kuni: 4B2031500
- Plokieraldus:
- Kerenumber (VIN) alates: 4B2031501
- Fitting Position: Front Axle
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Supplementary Article/Info 2: with integrated wheel bearing
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Width [mm]: 40
- Number of Holes: 4
-
Thread Size: M16x1,
5x77, M12x1, 5x45 - Bearing Type: Ball Bearing
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: MEY
- Lisainfo: 1004980122
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Kerenumber (VIN) kuni: ******4B*2*031500
- Installatsiooni pool: Esisild
-
Veljesuurus (toll): 17,
0, 18, 0 - Plokieraldus:
- Kerenumber (VIN) alates: ******4B*2*031500
- Width [mm]: 40
- Bearing Type: Angular Ball Bearing
- Outer Diameter 1 [mm]: 82
- Outer Diameter 2 [mm]: 85
- Inner Diameter 1 [mm]: 43
- Weight [kg]: 1.57
- Inner Diameter 2 [mm]: 45
- Supplementary Article/Supplementary Info: with motor shaft screw
- Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Supplementary Article/Info 2: with bolts/
screws - Outer Diameter [mm]: 82
- Inner Diameter [mm]: 45
-
Fitting Position: Front Axle Left,
Front Axle Right - Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Installatsiooni pool: Tagasild
- Width [mm]: 91
- Outer Diameter [mm]: 130
- Distance of mounting bores [mm]: 112
- Supplementary Article/Info 2: with ABS sensor ring
-
Thread Size: M14x1,
5 - Rim Hole Number: 5
- Number of Teeth, ABS ring: 45
- Net weight [kg]: 3.16
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: NK
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 131
- Width 2 [mm]: 70.2
- Outer Diameter 1 [mm]: 48
- Outer Diameter 2 [mm]: 68
- Tootja: JPN
- Ehitusaasta kuni: 05.2004
- Installatsiooni pool: Esisild
- vajaminev tükihulk: 2
-
Veljesuurus (toll): 17,
18 - Weight [kg]: 1.613
- Packaging length [cm]: 13.7
- Packaging width [cm]: 13.1
- Packaging height [cm]: 7.3
- Supplementary Article/Info 2: without flange
- Outer Diameter [mm]: 82
- Inner Diameter [mm]: 43
- Width [mm]: 40.2
-
Tootja: CONTITECH-
LOÅ»YSKA KÃÅ
- Installatsiooni pool: Tagasild
- Outer Diameter 2 [mm]: 131
- Number of mounting bores: 4
- Tootja: METELLI LOZYSKA KOLA PIASTY
- Installatsiooni pool: Esisild
-
Kerenumber (VIN) kuni: 4B-
2- 031500 -
Veljesuurus (toll): 17,
0, 18, 0 - Plokieraldus:
-
Kerenumber (VIN) alates: 4B-
2- 031501 - Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Outer Diameter 1 [mm]: 85
- Inner Diameter [mm]: 43
- Inner Diameter 2 [mm]: 45
- Width [mm]: 40.3
- SVHC: No SVHC present!
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: FAG
- Fitting Position: Rear Axle both sides
- Quantity per axle: 2
- Number of flange connections: 5
- Rim Hole Number: 5
- Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
- Outer Diameter [mm]: 131
- Bolt Hole Circle Ø [mm]: 112
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Kerenumber (VIN): [3B-
3- 450 001;], [;4D- 1- 006 000] - Number of Holes: 4
- Width 1 [mm]: 40
- Inner Diameter 1 [mm]: 45
- Outer Diameter 1 [mm]: 82
- Tightening Torque [Nm]: 180
-
Fitting Position: Front Axle Right,
Front Axle Left - Tootja: SNR
- Nimetus: SN R157.26
- Installatsiooni pool: Esisild
- vajaminev tükihulk: 2
-
Veljesuurus (toll): 18,
0, 17, 0 - Width [mm]: 40.25
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Supplementary Article/Info 2: without flange
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: SKF
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Varustusaste: REAR LR+RE
- OE-numbri jaoks: 8E0501611J
- Width 1 [mm]: 91
- Supplementary Article/Info 2: with integrated ABS sensor
- Number of mounting bores: 1
- Nimetus: DA KWD1054
- Tootja: DAYCO
- Installatsiooni pool: Tagasild
- Rim Hole Number: 5
- Flange Diameter [mm]: 131
- Supplementary Article/Info 2: with ABS sensor ring
- Kvaliteediklass: PJ
- Nimetus: Wheel hub
- for OE number: 8E0 501 611
- Fitting Position: Rear Axle both sides
- Tootja: TRUCKTEC
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Version: One
-
Thread Size: M14X1,
5 - Number of Teeth, ABS ring: 45
- Outer Diameter [mm]: 131
- Rim Hole Number: 5
- Supplementary Article/Info 2: with ABS sensor ring
- Tootja: GSP
- Hulk: 2
- Fitting Position: Rear Axle
- Number of Holes: 5
- Weight [kg]: 3.1
- Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
- Required quantity: 2
- Bolt Hole Circle Ø [mm]: 108
- Width [mm]: 130
- Inner Diameter [mm]: 40
-
Outer Diameter [mm]: 131,
56 - Bearing Type: Angular Ball Bearing
- General Information: wheel hub with bearing; rear
- Tootja: VIKA
- Installatsiooni pool: Tagasild
- Width [mm]: 91
- Outer Diameter [mm]: 130
- Tootja: OPTIMAL
- Installatsiooni pool: Tagasild
- Piduriliik: Ketaspidur
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Outer Diameter [mm]: 131
- Outer Diameter 2 [mm]: 68
- Outer Diameter 1 [mm]: 48
- Width 2 [mm]: 70.2
- Inner Diameter [mm]: 39
- SVHC: No SVHC present!
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: FAG
- Fitting Position: Rear Axle
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Supplementary Article/Info 2: with integrated wheel bearing
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 130
- Bolt Hole Circle Ø [mm]: 112
- Rim Hole Number: 5
- Bearing Type: Ball Bearing
- Nimetus: RATTARUMM
- Tootja: MEY
- Lisainfo: 1007520001
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
-
Installatsiooni pool: paremal,
vasakul, Tagasild - No. of holes 1: 5
- No. of holes 2: 5
- Supplementary Article/Info 2: with rubber mount
- Inner Diameter 1 [mm]: 39
- Outer Diameter 1 [mm]: 130
- Width 1 [mm]: 127
- Tootja: SNR
- Nimetus: SN R154.44
- Ehitusaasta kuni: 05.2004
- Installatsiooni pool: Tagasild
- vajaminev tükihulk: 2
- Weight [kg]: 3.2
- Packaging length [cm]: 15.3
- Packaging width [cm]: 15.6
- Packaging height [cm]: 17.6
- Supplementary Article/Info 2: with ABS sensor ring
- Outer Diameter [mm]: 131
- Rim Hole Number: 5
-
Tootja: CONTITECH-
LOÅ»YSKA KÃÅ
- Installatsiooni pool: Tagasild
- vajaminev tükihulk: 2
- Flange Diameter [mm]: 131
- Rim Hole Number: 5
- Supplementary Article/Info 2: with ABS sensor ring
- Tootja: SKF
- Nimetus: SK VKBA3489
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog