• Piduriliik: Ketaspidur
• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Height 1 [mm]: 14.75
• Height 2 [mm]: 17
• Lisainfo: Wheel bearing kit, rear, for one wheel

• Installatsiooni pool: esisild vasakul, esisild paremal
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 43
• Width [mm]: 37
• Tootja: JP GROUP
• Lisainfo: Wheel bearing, front

• Inner Diameter [mm]: 40
• Outer Diameter 1 [mm]: 52
• Outer Diameter 2 [mm]: 58
• Height [mm]: 7.5
• Material: NBR (nitrile butadiene rubber)
• Dust Cover: with dust lip
• Fitting Position: Rear Axle both sides
• Tootja: TOPRAN
• Lisainfo: 103 514 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thickness [mm]: 6.2, 7.5
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 52
• Material: NBR (nitrile butadiene rubber)
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.012
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 45
• Bearing Type: Tapered Roller Bearing
• Nimetus: Rattalaager
• Tootja: MAX

• Fitting Position: Front Axle both sides, inner
• Tootja: JP GROUP
• Lisainfo: Wheel bearing, front, inner

• Height [mm]: 14.7
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50.3
• Fitting Position: Front Axle
• Weight [kg]: 0.11
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: without wheel hub
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-AU-001
• Tootja: NTY
• Nimetus: NTY KLT-AU-001

• Piduriseade: trummelpiduriga tagasillal sõidukile
• Fitting Position: Rear Axle
• Width 1 [mm]: 15
• Width 2 [mm]: 16
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Bearing Type: Roller Bearing
• Tootja: DELLO AUTOMEGA

• Piduriseade: trummelpiduriga tagasillal sõidukile
• Installatsiooni pool: Tagasild mõlemapoolselt
• Laius 1 (mm): 15,5
• Laius 2 (mm): 14
• Välisläbimõõt 1 [mm]: 45
• Välisläbimõõt 2 [mm]: 50
• Siseläbimõõt 1 [mm]: 19
• Siseläbimõõt 2 (mm): 29
• Tootja: JPN

• Installatsiooni pool: Tagasild
• Laius 1 (mm): 14,2
• Laius 2 (mm): 15,5
• Välisläbimõõt 1 [mm]: 50,3
• Välisläbimõõt 2 [mm]: 45,2
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Kvaliteediklass: PJ
• Nimetus: Wheel bearing kit

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Width 1 [mm]: 16.637
• Width 2 [mm]: 14.732
• Outer Diameter 1 [mm]: 45.237
• Outer Diameter 2 [mm]: 50.292
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Tootja: GSP

• Installatsiooni pool: Tagasild
• Piirangutega toode/piirangu info 2: koos võllitihendiga
• Laius 1 (mm): 14,2
• Laius 2 (mm): 15,5
• Välisläbimõõt 1 [mm]: 50,3
• Välisläbimõõt 2 [mm]: 45,2
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Tootja: DENCKERMANN ZAWIESZENIE

• Alternative Repair Kit: 100 598 0101, 100 598 0101/SK
• Fitting Position: Rear Axle, inner
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50
• Height [mm]: 14.73
• Bearing Type: Tapered Roller Bearing
• Nimetus: RATTALAAGER
• Tootja: MEY

• Fitting Position: Rear Axle
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Outer Diameter 2 [mm]: 45.2
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: MAX

• Installatsiooni pool: Tagasild
• vajaminev tükihulk: 2
• Tootja: DRIVE

• Fitting Position: Rear Axle
• Width 1 [mm]: 15
• Width 2 [mm]: 16
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Tootja: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Installatsiooni pool: Tagasild
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 45
• Height [mm]: 17
• Bearing Type: Tapered Roller Bearing
• Nimetus: RATTALAAGER
• Tootja: MEY

Alternative Repair Kit: 100 598 0002, 100 498 0023, 014 033 0048, 714 502 0006, 614 750 0009

• Installatsiooni pool: Tagasild
• Width [mm]: 14.7
• Inner Diameter [mm]: 19.1
• Outer Diameter [mm]: 45.2
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: OPT

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.234
• Supplementary Article/Info 2: with fastening material
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Siseläbimõõt 1 [mm]: 19
• Välisläbimõõt 1 [mm]: 45
• Laius 1 (mm): 15
• Siseläbimõõt 2 (mm): 29
• Välisläbimõõt 2 [mm]: 50
• Laius 2 (mm): 16
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 15
• Outer Diameter 2 [mm]: 45
• Weight [kg]: 0.34
• Tootja: A.B.S.

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Varustusaste: REAR LR+RE
• Inner Diameter [mm]: 29
• Inner Diameter 2 [mm]: 19
• Width 1 [mm]: 14
• Width 2 [mm]: 45
• Number of mounting bores: 1
• Nimetus: DA KWD1150
• Tootja: DAYCO

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 19
• Weight [kg]: 0.234
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Info 2: with fastening material
• Nimetus: SW 30 85 0008
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter 1 [mm]: 50
• Width 1 [mm]: 14
• Fitting Position: Rear Axle Right
• Tootja: SNR
• Nimetus: SN R157.12

• Installatsiooni pool: Tagasild
• Width [mm]: 15.49
• Inner Diameter [mm]: 19.05
• Outer Diameter 1 [mm]: 50.29
• Tootja: METELLI LOZYSKA KOLA PIASTY

• Installatsiooni pool: Tagasild
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter 1 [mm]: 19.1
• Outer Diameter 1 [mm]: 45.2
• Width 1 [mm]: 16.6
• Inner Diameter 2 [mm]: 29
• Outer Diameter 2 [mm]: 50.3
• Width 2 [mm]: 14.7
• SVHC: No SVHC present!
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: FAG
• Lisainfo: 713 6102 40 FAG

• Piduriliik: Ketaspidur
• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Height 1 [mm]: 14.73
• Height 2 [mm]: 17
• Bearing Type: Tapered Roller Bearing
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Hulk: 2
• Installatsiooni pool: taga
• Üldine informatsioon: wheel bearing with assembly parts; rear
• Tootja: VIKA

• Ehitusaasta alates: 07.1992
• Laius (mm): 14,7, 17
• Siseläbimõõt [mm]: 29, 19
• Välisläbimõõt [mm]: 50,3, 45
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Tootja: METZGER

• Installatsiooni pool: Esisild
• Fitting Position: Rear Axle
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Nimetus: Rattalaagrikomplekt
• Tootja: MAX

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Bearing Type: Angular Ball Bearing
• Tootja: DELLO AUTOMEGA

• Installatsiooni pool: Esisild
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Tootja: DENCKERMANN ZAWIESZENIE

• Installatsiooni pool: esisild vasakul, esisild paremal
• Width 1 [mm]: 37
• Outer Diameter 1 [mm]: 82
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Tootja: GSP

• Fitting Position: Front Axle
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Bearing Type: Ball Bearing
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: MAX

• Fitting Position: Front Axle
• Width [mm]: 37
• Outer Diameter [mm]: 82
• Tootja: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Inner Diameter [mm]: 43
• Weight [kg]: 0.768
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Esisild
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter 1 [mm]: 82
• Tootja: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Outer Diameter [mm]: 82
• Inner Diameter 1 [mm]: 45
• Inner Diameter 2 [mm]: 43
• Width [mm]: 37
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with screw
• Full Set:
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: esisild mõlemapoolselt
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Tootja: JPN

• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Tootja: DRIVE

• Installatsiooni pool: esisild mõlemapoolselt
• Fitting Position: Front Axle, Rear Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1.87
• Bolt Hole Circle Ø 1 [mm]: 112
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 29SKV438

• Installatsiooni pool: Esisild
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Kvaliteediklass: PJ
• Nimetus: Wheel bearing kit

• Mudeliaasta alates: 1991
• Mudeliaasta kuni: 1992
• Fitting Position: Front Axle both sides
• Weight [kg]: 0.765
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Supplementary Article/Info 2: without wheel hub
• Packaging length [cm]: 8.2
• Packaging width [cm]: 8.2
• Packaging height [cm]: 3.7
• Tootja: FEBEST

• Installatsiooni pool: Esisild
• Laius (mm): 37
• Kaal (kg): 0,84
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Tootja: METALCAUCHO

• Outer Diameter [mm]: 82
• Quantity Unit: Set
• Inner Diameter [mm]: 43
• Fitting Position: Front Axle
• Weight [kg]: 0.694
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Varustusaste: FRRE LR+FR
• Inner Diameter [mm]: 43
• Width 1 [mm]: 37
• Number of mounting bores: 1
• Nimetus: DA KWD1060
• Tootja: DAYCO

• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 1.036
• Supplementary Article/Info 2: with bolts/screws, with nut
• Supplementary Article/Supplementary Info: with motor shaft screw
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• Alternative Repair Kit: 100 498 0037
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Nimetus: RATTALAAGER
• Tootja: MEY

• Installatsiooni pool: esisild vasakul, esisild paremal
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Weight [kg]: 0.84
• Outer Diameter 1 [mm]: 82
• Width 1 [mm]: 37
• Tootja: A.B.S.

• Installatsiooni pool: paremal, Esisild
• Nimetus: SN R157.11
• Tootja: NTN-SNR

• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: SKF

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material, with accessories
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Thread Size: M16x1,5x77
• Bearing Type: Ball Bearing
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with retaining ring
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Thread Size: M16x1,5x77
• Bearing Type: Ball Bearing
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Laius (mm): 37
• Installatsiooni pool: esisild vasakul, esisild paremal
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: paremal, Esisild
• Tootja: SNR
• Nimetus: SN R157.18

• Installatsiooni pool: Esisild
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Width [mm]: 37
• SVHC: No SVHC present!
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: FAG

• Ehitusaasta alates: 06.1991
• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Weight [kg]: 1.056
• Packaging length [cm]: 10.9
• Packaging width [cm]: 8.4
• Packaging height [cm]: 10.9
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 43
• Width [mm]: 37
• Tootja: CONTITECH-LOÅ»YSKA KÓŁ