• Number of pins: 2
• Colour: blue
• Tootja: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins

• Thread Size: M 22x1,5
• Spanner Size: 29
• Number of connectors: 2
• Plug Type: Blade Terminal
• Tootja: JP GROUP
• Lisainfo: Thermo switch for fan 95-90 C

• Number of pins: 3
• Switch Point [°C]: 118
• Colour: brown
• Tootja: JP GROUP
• Lisainfo: Thermo switch for cooling system 118 C, M14x1.5

• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Material: Rubber
• for OE number: 7198663
• Tootja: DELLO AUTOMEGA

• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Weight [kg]: 0.001
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Switch-on point [°C]: 95
• Shut-off Point [°C]: 90
• Thread Size: M22x1,5
• Colour: blue
• Number of pins: 2
• Connector Shape: angular
• Tootja: DELLO AUTOMEGA

• Colour: blue
• Number of pins: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: white
• Spanner Size: 19
• Thread Size: M14x1.5
• for OE number: 035919369M
• Supplementary Article/Info 2: with seal ring
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: 7A
• Thread Size: M14x1.5
• Tootja: VERNET

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Nimetus: SW 30 93 4762
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sõidukivarustus: Kliimaautomaatikaga sõidukile
• Sensor Type: NTC Sensor
• Colour: blue
• Number of pins: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY

• Thread Size: M14x1,5
• Colour: white
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Weight [kg]: 0.034
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Spanner Size: 29
• Colour Coding: grey
• Supplementary Article/Info 2: with seal ring
• for OE number: 191 959 481 C
• Number of pins: 3
• Thread Size: M22x1,5
• Switch Point [°C]: 95, 102
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: MAX
• Lisainfo: 21-0155

• Length [mm]: 37
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 025 906 041 A
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour Coding: blue
• Number of pins: 2
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 29
• Thread Size: M22x1,5
• Switch Point [°C]: 70, 75
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Switch point from [°C]: 75
• Switch point to [°C]: 70
• Weight [kg]: 0.066
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M20
• Number of pins: 2
• Connector Shape: rectangular
• Tootja: ERA

• for OE number: 191 959 481 C
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Tootja: TRUCKTEC

• Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Socket colour: white
• Tootja: ERA

• Operating temperature from [°C]: 95
• Operating temperature to [°C]: 90
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: VER

• Hulk: 1
• Weight [kg]: 0.03
• Number of connectors: 2
• External Thread [mm]: M14 x 1,5
• Screw length below head [mm]: 28
• Length [mm]: 52
• Colour: white
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Required quantity: 1
• Material: Brass, Plastic
• General Information: temperature sensor
• Tootja: VIKA

• Length [mm]: 52
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: white
• Material: Brass, Plastic
• Screw length below head [mm]: 28
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M22 x 1,5
• Colour: white
• Switch: for double thermal switch
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Weight [kg]: 0.077
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 2
• Colour Coding: blue
• Switch Point [°C]: 95, 90
• Weight [kg]: 0.035
• Supplementary Article/Info 2: with seal ring
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating temperature from [°C]: 95, 102
• Operating temperature to [°C]: 84, 91
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: VER

• Switch Point [°C]: 84
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Shut-off Point [°C]: 95, 92
• Switch Point [°C]: 85, 102
• Thread Size: M22x1,5 mm
• Spanner Size: 29 mm
• for OE number: 6U0959481A
• Tootja: MEAT & DORIA

• Mootorikood: 7A
• Pistikkontaktide arv: 2
• Temperature range from [°C]: 95
• Temperature range to [°C]: 90
• Thread Size: M22x1,5
• Spanner Size: 29
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: EPS

• External Thread Size: M22 x 1,5
• Spanner Size: 29
• Number of connectors: 3
• Colour Coding: grey
• Temperature range from [°C]: 95, 102
• Temperature range to [°C]: 84, 92
• Weight [kg]: 0.061
• Supplementary Article/Info 2: with seal ring
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Nimetus: SW 30 92 9318
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: 22x1,5
• Number of pins: 3
• Tootja: FAE ELEKTRYKA

• Thread Size: M22 x 1,5
• Spanner Size: 29
• Number of pins: 2
• Switch point from [°C]: 95
• Switch point to [°C]: 90
• Tootja: ERA

• Number of pins: 2
• Switch point from [°C]: 95
• Switch point to [°C]: 90
• Socket colour: blue
• Tootja: FAE

• Thread Size: M22x1,5
• Switch: for double thermal switch
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Climate Zones: for hot climate zones
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Weight [kg]: 0.076
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: 7A
• Pistikkontaktide arv: 2
• Thread Size: M14x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: black
• Nimetus: EP 1.830.126
• Tootja: EPS

• Number of pins: 3
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mootorikood: 7A
• Pistikkontaktide arv: 3
• Thread Size: M22x1,5
• Spanner Size: 29
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: EPS

• Kerenumber (VIN) kuni: 85F220000
• Thread Size: M22x1.5
• Number of pins: 2
• Tightening Torque [Nm]: 35
• Supplementary Article/Supplementary Info: with gasket/seal
• Switch-on point [°C]: 95
• Shut-off Point [°C]: 90
• Packaging width [cm]: 3.3
• Packaging length [cm]: 3.5
• Net Weight [g]: 55
• Packaging height [cm]: 7.2
• Tootja: MAHLE
• Nimetus: MH TSW9D

General Information: SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.

• Switch Point [°C]: 85
• Tootja: FAE

• Operating voltage [V]: 12
• Switch point from [°C]: 91, 84
• Switch point to [°C]: 102, 95
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Thread Size: M22 x 1,5
• Number of pins: 3
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: MEY

• Kerenumber (VIN) alates: 85G000001
• Thread Size: M22x1.5
• Number of pins: 3
• Tightening Torque [Nm]: 50
• Supplementary Article/Supplementary Info: with gasket/seal
• Switch-on point [°C]: 102, 95
• Shut-off Point [°C]: 84, 91
• Packaging width [cm]: 3.5
• Packaging length [cm]: 3.7
• Net Weight [g]: 62
• Packaging height [cm]: 7.2
• Tootja: MAHLE
• Nimetus: MH TSW31

• Mootorikood: 7A
• Warn Temperature [°C]: 85
• Thread Size: M10x1
• Spanner Size: 22
• Tootja: EPS

• Switch point to [°C]: 84
• Shut-off Point [°C]: 91
• Switch point from [°C]: 95
• Switch Point [°C]: 102
• Spanner Size: 29
• Weight [kg]: 0.078
• Tootja: VALEO
• Nimetus: VA 819769

• Colour: brown
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Height [mm]: 65.4
• Weight [kg]: 0.096
• Switch Point [°C]: 118
• Colour: brown
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Switch point from [°C]: 118
• Switch point to [°C]: 113
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.