• Keermemõõt: M 22x1,5
• Võtmekaugus: 29
• Ühenduste arv: 2
• Pistikute teostus: Lamepistik
• Tootja: JP GROUP
• Lisainfo: Thermo switch for fan 95-90 C

• Sisselülitamispunkt [°C]: 95
• Väljalülimispunkt (°C): 90
• Lisainfo: Thermo switch for fan 85-80 C

• Mudeliaasta alates: 1988
• Mudeliaasta kuni: 1989
• Kerenumber (VIN) alates: 44-J-200 100
• Pistikkontaktide arv: 3
• Lülituspunkt [°C]: 118
• Värv: pruun
• Tootja: JP GROUP
• Lisainfo: Thermo switch for cooling system 118 C, M14x1.5

• Siseläbimõõt [mm]: 19,5
• Jämedus/Tugevus (mm): 3,5
• Materjal: Kumm
• OE-numbri jaoks: 7198663
• Tootja: DELLO AUTOMEGA

• Siseläbimõõt [mm]: 19,5
• Jämedus/Tugevus (mm): 3,5
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kerenumber (VIN) alates: 44-J-200 100
• Kerenumber (VIN) kuni: 44-M-050 000, 44-J-200 099
• Keermemõõt: M10x1
• Värv: must
• Pistikkontaktide arv: 1
• Võtmekaugus: 14
• Pikkus (mm): 25
• Tootja: DELLO AUTOMEGA

• Pistikkontaktide arv: 2
• Värv: sinine
• Tootja: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins

• Värv: must
• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: JP GROUP
• Lisainfo: Sender for oil temperature

• OE-numbri jaoks: 025906041A
• Korpusevärv: sinine
• Tootja: KAMOKA

• Keermemõõt: M10x1,0
• Värv: must
• Ühenduste arv: 1
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Temperatuurivahemik kuni [°C]: 125
• Pikkus (mm): 25
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 10,9
• Võtmekaugus: 14
• Ühenduste arv: 1
• Värvimarkeering: must
• Kaal (kg): 0,012
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 99 90 1939
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kerenumber (VIN) alates: 44-G-000 001, F 44-G-000 001
• Sisselülitamispunkt [°C]: 95
• Väljalülimispunkt (°C): 90
• Keermemõõt: M22x1,5
• Värv: sinine
• Pistikkontaktide arv: 2
• Pistikukatte kuju: nurgeline
• Tootja: DELLO AUTOMEGA

• Anduritüüp: NTC-andur
• Keermemõõt: M10x1,0
• Võtmekaugus: 13
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Pistikkontaktide arv: 1
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY
• Lisainfo: 1009190015

• Pikkus (mm): 25
• Temperatuurivahemik kuni [°C]: 125
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 10,9
• Võtmekaugus: 14
• Ühenduste arv: 1
• Värvimarkeering: must
• Kaal (kg): 0,012
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: MC
• Värv: must
• Keermemõõt: M10x1
• Võtmekaugus: 13
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Mootorikood: MC
• Värv: must
• Keermemõõt: M10x1
• Võtmekaugus: 13
• Tootja: FACET

• Värvimarkeering: sinine
• Lülituspunkt [°C]: 95, 90
• OE-numbri jaoks: 893 959 481
• Pistikkontaktide arv: 2
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: MAX

• Värv: sinine
• Pistikkontaktide arv: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• OE-numbri jaoks: 811959481
• Võtmekaugus: 29
• Tootja: KAMOKA

• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 2
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

Tootja: FAE

• Ehitusaasta kuni: 12.1987
• Lülitamispunkt alates [°C]: 98
• Lülituspunkt kuni [°C]: 93
• Tootja: FAE

• Mootorikood: MC
• Keermemõõt: M10x1
• Võtmekaugus: 13
• Vastab originaalosa värvile: sinine
• Nimetus: ANDUR,OLITEMPERATUUR
• Tootja: EPS

• OE-numbri jaoks: A0015403045
• Värv: hall
• Võtmekaugus: 29
• Tootja: KAMOKA

• Temperatuurivahemik kuni [°C]: 125
• Väliskeere [mm]: M10 x 1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Värv: must
• Korpusevärv: must
• Pistikkontaktide arv: 1
• Keermemõõt: M10X1
• Võtmekaugus: 14
• Nimetus: DE TS10256
• Tootja: DELPHI

• Ühenduste arv: 2
• Värv: sinine
• Kaal (kg): 0,015
• Piirangutega toode/piirangu info: hoidevedruga, koos tihendiga
• Nimetus: SW 30 93 4762
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: MC
• tootekoodile: 1.660.015K, 1.830.278K, 1.879.946
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS
• Lisainfo: 1-830-278

• Mootorikood: MC
• tootekoodile: 26.0015K, 7.3278K, 7.7946
• Tootja: FACET

• Ühenduste arv: 2
• Värv: sinine
• Kaal (kg): 0,015
• Piirangutega toode/piirangu info: koos tihendiga, hoidevedruga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Võtmekaugus: 29
• Värvimarkeering: hall
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• OE-numbri jaoks: 191 959 481 C
• Pistikkontaktide arv: 3
• Keermemõõt: M22x1,5
• Lülituspunkt [°C]: 95, 102
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: MAX
• Lisainfo: 21-0155

• Pikkus (mm): 37
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• OE-numbri jaoks: 025 906 041 A
• Piirangutega toode/piirangu info: koos tihendiga
• Värvimarkeering: sinine
• Pistikkontaktide arv: 2
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pikkus (mm): 29
• Keermemõõt: M22x1,5
• Lülituspunkt [°C]: 70, 75
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 2
• Lülitamispunkt alates [°C]: 75
• Lülituspunkt kuni [°C]: 70
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: MC
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Ehitusaasta alates: 09.1986
• Töötemperatuur alates [°C]: 95
• Töötemperatuur kuni [°C]: 90
• Keermemõõt: M22x1.5
• Anduritüüp: lahtine anduri ehitusviis
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: VER

• Pistikkontaktide arv: 2
• Lülitamispunkt alates [°C]: 95
• Lülituspunkt kuni [°C]: 90
• Pistiku värv: sinine
• Tootja: FAE

• Keermemõõt: M22 x 1,5
• Värv: valge
• Lüliti: Topelttermolüliti jaoks
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Lülitamispunkt alates [°C]: 102
• Lülituspunkt kuni [°C]: 85
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: MC
• Ehitusaasta alates: 09.1986
• temperatuurivahemik alates [°C]: 95
• Temperatuurivahemik kuni [°C]: 90
• Keermemõõt: M22x1,5
• Võtmekaugus: 29
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: EPS

• Ehitusaasta alates: 01.1988
• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Pistiku värv: must
• Väljalülimispunkt (°C): 95, 92
• Lülituspunkt [°C]: 85, 102
• Keermemõõt: M22x1,5 mm
• Võtmekaugus: 29 mm
• OE-numbri jaoks: 6U0959481A
• Tootja: MEAT & DORIA

• Ehitusaasta alates: 10.1986
• Töötemperatuur alates [°C]: 95, 102
• Töötemperatuur kuni [°C]: 84, 91
• Keermemõõt: M22x1.5
• Anduritüüp: lahtine anduri ehitusviis
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: VER

• Väliskeerme mõõde: M22 x 1,5
• Võtmekaugus: 29
• Ühenduste arv: 3
• Värvimarkeering: hall
• temperatuurivahemik alates [°C]: 95, 102
• Temperatuurivahemik kuni [°C]: 84, 92
• Kaal (kg): 0,061
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lülituspunkt [°C]: 84
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mudeliaasta alates: 1988
• Mudeliaasta kuni: 1989
• Kerenumber (VIN) alates: 44-J-200 100
• Kasutuspinge [V]: 12
• Lülitamispunkt alates [°C]: 91, 84
• Lülituspunkt kuni [°C]: 102, 95
• Võtmekaugus: 29
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Keermemõõt: M22 x 1,5
• Pistikkontaktide arv: 3
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: MEY

• Ehitusaasta alates: 01.1988
• Keermemõõt: 22x1,5
• Pistikkontaktide arv: 3
• Tootja: FAE

• Ühenduste arv: 2
• Värvimarkeering: hall
• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info: koos tihendiga, hoidevedruga
• Nimetus: SW 30 92 9318
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M22x1,5
• Lüliti: Topelttermolüliti jaoks
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Kliimatsoonid: kuuma kliimavööndi jaoks
• Lülitamispunkt alates [°C]: 102
• Lülituspunkt kuni [°C]: 85
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ühenduste arv: 2
• Värvimarkeering: sinine
• Lülituspunkt [°C]: 95, 90
• Kaal (kg): 0,035
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• OE-numbri jaoks: 893959481
• Keermemõõt: M22x1.5
• Pistikkontaktide arv: 2
• Väändejõud [Nm]: 35
• Piirangutega toode/piirangu info: koos tihendiga
• Sisselülitamispunkt [°C]: 95
• Väljalülimispunkt (°C): 90
• pakendi laius [cm]: 3,3
• pakendi pikkus [cm]: 3,5
• Netokaal [g]: 55
• pakendi kõrgus [cm]: 7,2
• Tootja: MAHLE
• Nimetus: MH TSW9D

Üldine informatsioon: SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.

• Keermemõõt: M22x1,5
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 2
• Lülitamispunkt alates [°C]: 98
• Lülituspunkt kuni [°C]: 93
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 191959481A
• Keermemõõt: M22x1.5
• Pistikkontaktide arv: 3
• Väändejõud [Nm]: 50
• Piirangutega toode/piirangu info: koos tihendiga
• Sisselülitamispunkt [°C]: 102, 95
• Väljalülimispunkt (°C): 84, 91
• pakendi laius [cm]: 3,5
• pakendi pikkus [cm]: 3,7
• Netokaal [g]: 62
• pakendi kõrgus [cm]: 7,2
• Tootja: MAHLE
• Nimetus: MH TSW31

• Lülituspunkt kuni [°C]: 84
• Väljalülimispunkt (°C): 91
• Lülitamispunkt alates [°C]: 95
• Lülituspunkt [°C]: 102
• Võtmekaugus: 29
• Tootja: VALEO
• Nimetus: VA 819769

• Värv: pruun
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Lülituspunkt [°C]: 118
• Värv: pruun
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: METZGER

• Kõrgus (mm): 65,4
• Lülituspunkt [°C]: 118
• Värv: pruun
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Lülitamispunkt alates [°C]: 118
• Lülituspunkt kuni [°C]: 113
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.