• Kerenumber (VIN) alates: 8D-T-309403
• Kogus pakendis: 10
• Inner Diameter [mm]: 28.5
• Sealing Ring Diameter [mm]: 28.5
• Thickness [mm]: 3.8
• Shape: O-Ring
• Nimetus: RONGASTIHEND
• Tootja: HAN

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Nimetus: Radiator
• Kvaliteediklass: ZJ

Lisainfo: A4 94-00 (kvaliteediklass ZJ)

• Sõidukivarustus: Kliimaseadmega sõidukile
• Käigukasti liik: Käigukast
• Cooling fins material: Aluminium
• Core Depth [mm]: 32
• Core Length [mm]: 635
• Core Width [mm]: 396
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water Tank Material (radiator): Plastic
• Tootja: NISSENS
• Nimetus: NI 60299
• Lisainfo: SKODA SUPERB I (3U) (02-) 2.0 i

Installation Information: MultiFit - Nissens has combined multiple product designs into one part

• Kerenumber (VIN) alates: 8D-T-309403
• Kogus pakendis: 10
• Thickness [mm]: 3.8
• Outer Diameter [mm]: 28.5
• Material: Rubber
• Weight [kg]: 0.006
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta alates: 12.1994
• Surve (bar): 1,2
• Tootja: ASHIKA

• Ehitusaasta alates: 12.1994
• Surve (bar): 1,2
• Tootja: JAPKO

• Surve (bar): 1,5
• Tootja: ASHIKA

• Surve (bar): 1,5
• Tootja: JAPKO

• Mootorikood: AHL, ARM, ANA, ADP
• Plokieraldus:
• Kerenumber (VIN) alates: 8D-T-309 403
• Värv: sinine
• Materjal: Plastik
• Surve alates (bar): 1,5
• Kaal (kg): 0,119
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Käigukasti liik: Käigukast 5 käiku
• Supplementary Article/Info 2: without sensor, with seal ring
• Material: Aluminium
• Core Length [mm]: 632
• Core Width [mm]: 415
• Core Depth [mm]: 34
• Radiator type: Mechanically jointed cooling fins
• Nimetus: RADIAATOR,MOOTORIJAHUTUS
• Tootja: NRF
• Lisainfo: 632*395*32

• Käigukasti liik: Käigukast 5 käiku
• Supplementary Article/Info 2: without sensor
• Material: Aluminium
• Core Length [mm]: 415
• Core Width [mm]: 632
• Core Depth [mm]: 34
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Nimetus: RADIAATOR,MOOTORIJAHUTUS
• Tootja: MAX

• Nimetus: Radiator
• Kvaliteediklass: PJ

Lisainfo: A6 97-01 (kvaliteediklass PJ)

• Ehitusaasta alates: 03.1996
• Core Length [mm]: 630
• Core Width [mm]: 397
• Core Depth [mm]: 32
• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles with/without air conditioning
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 79
• Packaging width [cm]: 47
• Packaging height [cm]: 14
• Weight [kg]: 3.38
• Tootja: AKSDASIS

• Nimetus: Radiator
• Kvaliteediklass: P

Lisainfo: A4 94-00 (kvaliteediklass P)

• Sõidukivarustus: Kliimaseadmega sõidukile
• Käigukasti liik: Käigukast
• Cooling fins material: Aluminium
• Core Depth [mm]: 32
• Core Length [mm]: 630
• Core Width [mm]: 396
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers

• Ehitusaasta alates: 01.1999
• Mootorikood: ADP, AHL, ANA, ARM
• Kerenumber (VIN) alates: 1-060 791
• Sõidukivarustus: sõidukitele ilma kliimaseadmeta
• Käigukasti liik: Käigukast 5 käiku
• Core Length [mm]: 632
• Core Width [mm]: 396
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• Technical Information: Aluminium core with plastyic tanks
• Nimetus: MM BM1917
• Tootja: MAGNETI MARELLI

• Core Length [mm]: 635
• Core Width [mm]: 398
• Core Depth [mm]: 34
• Trim Level: FIRST FIT
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Radiator type: Mechanically jointed cooling fins
• Lisainfo: AUDI A 4 / S 4 (B5) (94-) 1.6 i

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Nimetus: Radiator
• Kvaliteediklass: PJ

Lisainfo: "Tootja: RNBC
A6 97-01
(kvaliteediklass: PJ)"

• Radiaatori tüüp: Jahutusribid mehaaniliselt ühendatud
• Käigukasti liik: Käigukast
• Jahutusribi materjal: Alumiinium
• Materjal veekamber (radiaator): Plastik
• Netopikkus [mm]: 632
• Netolaius [mm]: 396
• Netosügavus [mm]: 32
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Core Length [mm]: 632
• Core Width [mm]: 398
• Core Depth [mm]: 23
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Radiator type: Mechanically jointed cooling fins
• Tootja: KAMOKA

• Käigukasti liik: Käigukast
• Jahutusribi materjal: Alumiinium
• Materjal veekamber (radiaator): Plastik
• Sõidukivarustus: sõidukitele ilma kliimaseadmeta
• Netopikkus [mm]: 632
• Netolaius [mm]: 398
• Netosügavus [mm]: 34
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Nimetus: Radiator
• Kvaliteediklass: ZJ

Lisainfo: A6 97-01 (kvaliteediklass PJ)

• Sõidukivarustus: sõidukitele ilma kliimaseadmeta
• Käigukasti liik: Käigukast
• Core Length [mm]: 629
• Core Width [mm]: 399
• Core Depth [mm]: 22
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Lisainfo: Radiator, engine cooling

• Ehitusaasta kuni: 12.1998
• Käigukasti liik: Automaatkäigukast
• Jahutusribi materjal: Alumiinium
• Materjal veekamber (radiaator): Plastik
• Netopikkus [mm]: 632
• Netolaius [mm]: 398
• Netosügavus [mm]: 34
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Netosügavus [mm]: 0
• Netopikkus [mm]: 0
• Netolaius [mm]: 0
• Materjal: Alumiinium, Plastik
• Sisend-Ø (mm): 32,5
• Väljalase-Ø (mm): 32,5
• Üldine informatsioon: radiator; pipe enlarging
• Tootja: VIKA

• Transmission Type: Manual Transmission
• Radiator type: Mechanically jointed cooling fins
• Core Depth [mm]: 34
• Core Length [mm]: 632
• Core Width [mm]: 415
• Inlet Ø [mm]: 33
• Outlet Ø [mm]: 33
• Tootja: TYC OŒWIETLENIE

• Core Length [mm]: 632
• Core Width [mm]: 398
• Core Depth [mm]: 34
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Radiator type: Mechanically jointed cooling fins
• Lisainfo: AUDI A 4 / S 4 (B5) (94-) 1.6 i

• Core Length [mm]: 635
• Core Width [mm]: 398
• Core Depth [mm]: 34
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Radiator type: Mechanically jointed cooling fins
• Tootja: KAMOKA

• Sõidukivarustus: sõidukitele ilma kliimaseadmeta
• Käigukasti liik: Käigukast
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 632
• Core Width [mm]: 415
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers

• Käigukasti liik: automaatkast 4 käiku
• Material: Aluminium
• Heating/Cooling: for vehicles with combined radiator/ oil cooler
• Core Length [mm]: 415
• Core Width [mm]: 632
• Core Depth [mm]: 34
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Nimetus: RADIAATOR,MOOTORIJAHUTUS
• Tootja: MAX

• Core Length [mm]: 632
• Core Width [mm]: 415
• Core Depth [mm]: 34
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Radiator type: Brazed cooling fins
• Tootja: KAMOKA

• Käigukasti liik: Käigukast 5 käiku
• Material: Aluminium
• Core Length [mm]: 632
• Core Width [mm]: 395
• Core Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Radiator type: Brazed cooling fins
• Tootja: NRF
• Lisainfo: 632*395*24

• Käigukasti liik: Käigukast
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 635
• Core Width [mm]: 398
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without cap, without expansion tank
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water Tank Material (radiator): Plastic
• Tootja: NISSENS
• Lisainfo: AUDI A 4 / S 4 (B5) (94-) 1.8 i

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Sõidukivarustus: sõidukitele ilma kliimaseadmeta
• Käigukasti liik: Käigukast
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 632
• Core Width [mm]: 415
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Tootja: NISSENS
• Nimetus: NI 60308A
• Lisainfo: SKODA SUPERB I (3U) (02-) 1.9 TDi

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Sõidukivarustus: Kliimaseadmega sõidukile
• Käigukasti liik: Käigukast
• Core Length [mm]: 632
• Core Width [mm]: 398
• Core Depth [mm]: 32
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Lisainfo: Radiator, 631x399 mm, PL/ALU

• Nimetus: Radiator
• Kvaliteediklass: P

Lisainfo: A6 97-01 (kvaliteediklass PJ)

• Käigukasti liik: automaatkast 4 käiku
• Material: Aluminium
• Heating/Cooling: for vehicles with combined radiator/ oil cooler
• Core Length [mm]: 632
• Core Width [mm]: 415
• Core Depth [mm]: 34
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Nimetus: RADIAATOR,MOOTORIJAHUTUS
• Tootja: NRF
• Lisainfo: 632*415*34

• Core Length [mm]: 632
• Core Width [mm]: 399
• Core Depth [mm]: 32
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• for OE number: 4B0121251T
• Radiator type: Mechanically jointed cooling fins
• Tootja: KAMOKA

• Käigukasti liik: Käigukast 5 käiku
• Supplementary Article/Info 2: without sensor, with seal ring
• Material: Aluminium
• Core Length [mm]: 632
• Core Width [mm]: 395
• Core Depth [mm]: 33
• Radiator type: Brazed cooling fins
• Nimetus: RADIAATOR,MOOTORIJAHUTUS
• Tootja: NRF
• Lisainfo: 632*395*34

• Kvaliteediklass: P

Lisainfo: A6 97-01 (kvaliteediklass P)

• Ehitusaasta kuni: 07.1999
• Mootorikood: ADP, AHL, ANA, ARM
• Käigukasti liik: automaatkast 4 käiku
• Core Depth [mm]: 23
• Core Width [mm]: 396
• Core Length [mm]: 635
• Radiator type: Mechanically jointed cooling fins
• Technical Information: Aluminium core with plastyic tanks
• Nimetus: MM BM1576
• Tootja: MAGNETI MARELLI

• Käigukasti liik: Käigukast
• Materjal: Alumiinium
• Radiaatori tüüp: Jahutusribid mehaaniliselt ühendatud
• Netopikkus [mm]: 632
• Netolaius [mm]: 396
• Netosügavus [mm]: 32
• Jahutusribi materjal: Alumiinium
• Materjal veekamber (radiaator): Plastik
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ehitusaasta kuni: 02.1996
• Sõidukivarustus: sõidukitele ilma kliimaseadmeta
• Käigukasti liik: Käigukast
• Mootorikood: ADP
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 635
• Core Width [mm]: 398
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Core Length [mm]: 632
• Core Width [mm]: 399
• Core Depth [mm]: 32
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• for OE number: 8D0.121.251 C
• Radiator type: Mechanically jointed cooling fins
• Tootja: KAMOKA

• Core Length [mm]: 630
• Core Width [mm]: 397
• Core Depth [mm]: 32
• Transmission Type: Automatic Transmission
• Vehicle Equipment: for vehicles with/without air conditioning
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 79
• Packaging width [cm]: 47
• Packaging height [cm]: 14
• Weight [kg]: 3.84
• Tootja: AKSDASIS

• Core Length [mm]: 630
• Core Width [mm]: 420
• Core Depth [mm]: 24
• Inlet Ø [mm]: 31
• Outlet Ø [mm]: 31
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic
• Cooling fins material: Aluminium
• Packaging length [cm]: 79
• Packaging width [cm]: 47
• Packaging height [cm]: 14
• Weight [kg]: 3.52
• for OE number: 8D0121251K
• Tootja: AKSDASIS

• Versioon: 3
• Käigukasti liik: Automaatkäigukast
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 632
• Core Width [mm]: 396
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: with oil cooler, without gasket/seal
• Water Tank Material (radiator): Plastic
• Nimetus: NI 60229
• Tootja: NISSENS
• Lisainfo: AUDI A 4 / S 4 (B5) (94-) 1.6 i

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Laius (mm): 38
• Käigukasti liik: Käigukast
• Pikkus (mm): 632
• Sügavus (mm): 22
• Kaal (kg): 6,5
• Sõidukivarustus: sõidukitele koos/ilma kliimaseade
• Netosügavus [mm]: 0
• Netopikkus [mm]: 0
• Netolaius [mm]: 0
• Üldine informatsioon: radiator; pipe enlarging
• Tootja: VIKA

• Käigukasti liik: Käigukast 5 käiku
• Küte/Jahutus: sõidukite jaoks koos raceingradiaatoriga
• Material: Aluminium
• Core Length [mm]: 630
• Core Width [mm]: 383
• Core Depth [mm]: 33
• Radiator type: Brazed cooling fins
• Tootja: NRF
• Lisainfo: 630*383*33

Sõidukivarustus: Kliimaseadmega sõidukile, Sõidukitele koos haakeseadmega

• Versioon: 1
• Käigukasti liik: Automaatkäigukast
• Core Length [mm]: 632
• Core Width [mm]: 399
• Core Depth [mm]: 32
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Lisainfo: Radiator, 631x399 mm, PL/ALU

• Ehitusaasta kuni: 10.1996
• Mootorikood: ADP, AHL, ANA, ARM
• Käigukasti liik: automaatkast 4 käiku
• Core Width [mm]: 396
• Core Length [mm]: 635
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• Technical Information: Aluminium core with plastyic tanks
• Nimetus: MM BM1855
• Tootja: MAGNETI MARELLI

• Core Length [mm]: 630
• Core Width [mm]: 397
• Core Depth [mm]: 32
• Inlet Ø [mm]: 31
• Outlet Ø [mm]: 31
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 79
• Packaging width [cm]: 47
• Packaging height [cm]: 14
• Weight [kg]: 3.54
• Tootja: AKSDASIS

• Versioon: 2
• Käigukasti liik: Automaatkäigukast
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 635
• Core Width [mm]: 398
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without cap, without expansion tank
• Supplementary Article/Supplementary Info: with oil cooler, with gaskets/seals
• Water Tank Material (radiator): Plastic
• Tootja: NISSENS
• Lisainfo: AUDI A 4 / S 4 (B5) (94-) 1.6 i

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Käigukasti liik: automaatkast 4 käiku
• Material: Aluminium
• Heating/Cooling: for vehicles with combined radiator/ oil cooler
• Core Length [mm]: 632
• Core Width [mm]: 415
• Core Depth [mm]: 34
• Radiator type: Mechanically jointed cooling fins
• Nimetus: RADIAATOR, KŽIVITUSAKU
• Tootja: NRF
• Lisainfo: 632*399*32

• Kerenumber (VIN) kuni: 1-060 790
• Mootorikood: ADP,AHL,ANA,ARM
• Käigukasti liik: Käigukast 5 käiku, automaatkast 4 käiku
• Sõidukivarustus: Konditsioneeriga sõidukile
• Šassii: tugevdatud šassiiga sõidukile
• Core Width [mm]: 415
• Core Length [mm]: 632
• Core Depth [mm]: 34
• Material: Aluminium
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Heating/Cooling: for vehicles without oil cooler
• Supplementary Article/Info 2: with coolant regulator
• Radiator type: Mechanically jointed cooling fins
• Weight [kg]: 5.17
• Tootja: VALEO

• Käigukasti liik: Käigukast
• Sõidukivarustus: sõidukitele ilma kliimaseadmeta
• Ehitusaasta alates: 11.1994
• Ehitusaasta kuni: 02.1996
• Netosügavus [mm]: 32
• Netopikkus [mm]: 630
• Netolaius [mm]: 382
• Radiaatori tüüp: Jahutusribid joodetud
• Materjal veekamber (radiaator): Plastik
• Tehniline informatsioon: quick connection outlet
• Nimetus: Radiator
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
A4 94-00
(kvaliteediklass: PJ)"

• Versioon: 3
• Käigukasti liik: Automaatkäigukast
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 632
• Core Width [mm]: 396
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Supplementary Info: with oil cooler
• Water Tank Material (radiator): Plastic

Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers

• Core Length [mm]: 630
• Core Width [mm]: 420
• Core Depth [mm]: 34
• Inlet Ø [mm]: 31
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• reinforced version:
• Packaging length [cm]: 80
• Packaging width [cm]: 50
• Packaging height [cm]: 16
• Weight [kg]: 3.56
• Tootja: AKSDASIS

• Versioon: 1
• Käigukasti liik: Automaatkäigukast
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 635
• Core Width [mm]: 398
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without cap, without expansion tank
• Supplementary Article/Supplementary Info: with oil cooler, with gaskets/seals
• Water Tank Material (radiator): Plastic
• Tootja: NISSENS
• Lisainfo: AUDI A 4 / S 4 (B5) (94-) 1.6 i

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Käigukasti liik: automaatkast 4 käiku
• Material: Aluminium
• Heating/Cooling: for vehicles with combined radiator/ oil cooler
• Core Length [mm]: 632
• Core Width [mm]: 395
• Core Depth [mm]: 34
• Supplementary Article/Info 2: with seal ring
• Radiator type: Brazed cooling fins
• Tootja: NRF
• Lisainfo: 632*428,8*30

• Radiator type: Mechanically jointed cooling fins
• Heating/Cooling: for vehicles with high performance radiator
• Core Length [mm]: 632
• Core Width [mm]: 385
• Core Depth [mm]: 32
• Water Tank Material (radiator): Plastic
• Supplementary Article/Info 2: with quick couplers, with screw
• Vehicle Equipment: for vehicles with/without air conditioning
• Transmission Type: Manual Transmission
• Packaging height [cm]: 17
• Net Weight [g]: 3,686
• Packaging width [cm]: 55
• Packaging length [cm]: 84
• Nimetus: Radiaator,mootorijahutus
• Tootja: BEH MAH

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Käigukasti liik: Käigukast
• Sõidukivarustus: sõidukitele koos/ilma kliimaseade
• Ehitusaasta alates: 03.1996
• Ehitusaasta kuni: 07.1997
• Netosügavus [mm]: 32
• Netopikkus [mm]: 632
• Netolaius [mm]: 385
• Radiaatori tüüp: Jahutusribid joodetud
• Materjal veekamber (radiaator): Plastik
• Tehniline informatsioon: quick connection inlet/outlet
• Nimetus: Radiator
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
A6 97-01
(kvaliteediklass: PJ)"