• Pistikkontaktide arv: 2
• Värv: sinine
• Tootja: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins

• OE-numbri jaoks: 049919563B
• Keermemõõt: M10x1 mm
• Võtmekaugus: 13 mm
• Pistikkontaktide arv: 1
• Tootja: KAMOKA
• Lisainfo: 4080049 KAMOKA

• Mootorikood: AAD
• Tootja: AIC
• Lisainfo: 51913 AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• OE-numbri jaoks: 025906041A
• Korpusevärv: sinine
• Tootja: KAMOKA

• Keermemõõt: M10x1,0
• Värv: must
• Ühenduste arv: 1
• Kaal (kg): 0,019
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 2
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Kasutuspinge [V]: 12
• Anduritüüp: passiivne andur
• Lüliti funktsioon: Reed-lüliti
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikkontaktide arv: 2
• Tootja: JP GROUP
• Lisainfo: Distance sensor

• Pikkus (mm): 25
• Temperatuurivahemik kuni [°C]: 125
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 10,9
• Võtmekaugus: 14
• Ühenduste arv: 1
• Värvimarkeering: must
• Kaal (kg): 0,012
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M10 x 1
• Võtmekaugus: 14
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 1
• Värvimarkeering: sinine
• Kaal (kg): 0,019
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Temperatuurivahemik kuni [°C]: 125
• Pikkus (mm): 25
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 10,9
• Võtmekaugus: 14
• Ühenduste arv: 1
• Värvimarkeering: must
• Kaal (kg): 0,012
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 99 90 1939
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Anduritüüp: NTC-andur
• Keermemõõt: M10x1,0
• Võtmekaugus: 13
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Pistikkontaktide arv: 1
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY
• Lisainfo: 1009190015

• Pistikkontaktide arv: 3
• Lülituspunkt [°C]: 120
• Värv: hall
• Tootja: JP GROUP
• Lisainfo: Sender for water temperature gauge 3 pins

• Pistikkontaktide arv: 2
• Garantii: 3 aastat garantii
• Kaal (kg): 0,05
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV555

Käigukasti liik: Käigukast 5 käiku, Käigukast 6 käiku, automaatkast 4 käiku

• Hulk: 1
• Üldine informatsioon: distance sensor
• Tootja: VIKA

• Värv: sinine
• Pistikkontaktide arv: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• OE-numbri jaoks: 025906041A
• Piirangutega toode/piirangu info 2: koos osadega
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 2
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Sõidukivarustus: Kliimaautomaatikaga sõidukile
• Kerenumber (VIN) alates: 4A-M-000 001
• Anduritüüp: NTC-andur
• Värv: sinine
• Pistikkontaktide arv: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY

• Keermemõõt: M10x1.0
• Tootja: VERNET

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Pistiku värv: valge
• Võtmekaugus: 19
• Keermemõõt: M10x1
• OE-numbri jaoks: 026906161
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Mootorikood: AAD
• Pistikkontaktide arv: 1
• Värv: sinine
• Keermemõõt: M10x1
• Võtmekaugus: 13
• Vastab originaalosa värvile: sinine
• Nimetus: ANDUR,OLITEMPERATUUR
• Tootja: EPS

• Ühenduste arv: 2
• Värv: sinine
• Kaal (kg): 0,015
• Piirangutega toode/piirangu info: hoidevedruga, koos tihendiga
• Tootja: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Temperatuurivahemik kuni [°C]: 125
• Väliskeere [mm]: M10 x 1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pistikkontaktide arv: 2
• Värv: must
• Materjal: Plastik
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mootorikood: AAD
• Pistikkontaktide arv: 2
• Värv: sinine
• Tootja: FACET

• Mootorikood: AAD
• Pistikkontaktide arv: 2
• Värv: sinine
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Ühenduste arv: 2
• Värv: sinine
• Kaal (kg): 0,015
• Piirangutega toode/piirangu info: koos tihendiga, hoidevedruga
• Nimetus: SW 30 93 4762
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 37
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• OE-numbri jaoks: 025 906 041 A
• Piirangutega toode/piirangu info: koos tihendiga
• Värvimarkeering: sinine
• Pistikkontaktide arv: 2
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Keermemõõt: 20 mm
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: VER

• Väliskeerme mõõde: M10 x 1
• Ühenduste arv: 1
• Kaal (kg): 0,01
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M20
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Tootja: ERA

• Värv: hall
• Pistikkontaktide arv: 3
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Tunnustäht: G89
• Kaal (kg): 0,009
• Tootja: VEMO GERMANY

Sõidukivarustus: Kliimaautomaatikaga sõidukile, Kliimaseadmega sõidukile Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Väliskeerme mõõde: M10 x 1
• Ühenduste arv: 1
• Kaal (kg): 0,01
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 30 93 3825
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Temperatuurivahemik kuni [°C]: 125
• Tootja: ERA

• Montaaživiis: pistetud
• Pinge [V]: 12
• Takistus [oom]: 2 080, 322
• Piirangutega toode/piirangu info: koos tihendiga
• temperatuurivahemik alates [°C]: 25
• Temperatuurivahemik kuni [°C]: 80
• Värv: sinine
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos turvarõngaga
• Vastab originaalosa värvile: sinine
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: HELLA
• Nimetus: HE 6PT009107551

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Pistikkontaktide arv: 2
• Kaal (kg): 0,3
• pakendi pikkus [cm]: 12
• pakendi laius [cm]: 8
• pakendi kõrgus [cm]: 6

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: ümar
• Pistikkontaktide arv: 3
• Temperatuurivahemik [°C]: 120
• OE-numbri jaoks: 053919501A
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: NRF

• Anduritüüp: NTC-andur
• Värv: hall
• Pistikkontaktide arv: 3
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY
• Lisainfo: 1009190010

• Ühenduste arv: 2
• Värvimarkeering: hall
• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info: koos tihendiga, hoidevedruga
• Nimetus: SW 30 92 9318
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ühenduste arv: 2
• Värvimarkeering: hall
• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,015
• Piirangutega toode/piirangu info: koos tihendiga, hoidevedruga
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Käigukasti liik: automaatkast 4 käiku
• Pistikkontaktide arv: 2
• Nimetus: ANDUR,KIIRUS
• Tootja: MAX
• Lisainfo: 095927321C/MG

• Käigukasti liik: Automaatkäigukast
• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 2
• Garantii: 3 aastat garantii
• Kaal (kg): 0,02
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: ESEN SKV

• Keermemõõt: M10 x 1
• Temperatuurivahemik kuni [°C]: 110
• Tootja: ERA

• Üldine informatsioon: interior temperature sensor
• Tootja: BORSEHUNG

• Pistikkontaktide arv: 3
• Nimetus: ANDUR,SššTEIMPULSS
• Tootja: MAX
• Lisainfo: 030905065/MG

• Installatsiooni pool: väljas
• Nimetus: Andur,v„listemperatuur
• Tootja: MAX

• Ühenduste arv: 3
• Värv: hall
• Lülituspunkt [°C]: 120
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: AAD
• Pistikkontaktide arv: 3
• Hoiatustemperatuur (°C): 125
• Nimetus: EP 1.830.533
• Tootja: EPS

• Ühenduste arv: 3
• Värv: hall
• Lülituspunkt [°C]: 120
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 30 93 7608
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kerenumber (VIN) alates: 4A-M-000 001
• Pistikkontaktide arv: 2
• Kaal (kg): 0,02
• Tootja: VEMO

Käigukasti liik: Käigukast 5 käiku, Käigukast 6 käiku, automaatkast 4 käiku Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

OE-numbri jaoks: 053919501A

• Pistiku kesta tüüp: Pistikuhülsi korpus
• Tootja piirang: Alfa Romeo, Fiat, VAG
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 250
• Kaabli ristlõige [mm²]: 1
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Piirangutega toode/piirangu info 2: koos ühendusega
• temperatuurivahemik alates [°C]: −25
• Temperatuurivahemik kuni [°C]: +140
• juhtmeisolatsiooni materjal: Silikoon
• SVHC: SVHS aineid ei esine
• Tootja: HBE

Nimetus: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Sõidukivarustus: Kliimaautomaatikaga sõidukile
• Installatsiooni pool: väljas
• Piirangutega toode/piirangu info 2: koos kaabliga
• Pistikkontaktide arv: 2
• Tootja: METZGER

• Mootorikood: AAD
• Käigukasti liik: Automaatkäigukast
• Pistikkontaktide arv: 2
• Tootja: FAE

• Pistiku kesta tüüp: Pistikuhülsi korpus
• Tootja piirang: BMW, Volvo, VAG
• Pistikkontaktide arv: 3
• Kaablipikkus (mm): 250
• Kaabli ristlõige [mm²]: 1
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Piirangutega toode/piirangu info 2: koos ühendusega
• temperatuurivahemik alates [°C]: −25
• Temperatuurivahemik kuni [°C]: +140
• juhtmeisolatsiooni materjal: Silikoon
• SVHC: SVHS aineid ei esine
• Tootja: HBE

Nimetus: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul

• Keermemõõt: M10x1
• Tootja: FAE

• Keermemõõt: M10X1
• Lülituspunktid [bar]: 0,3
• Töösurve kuni [bar]: 5
• Tootja: METZGER

• Nimetus: ANDUR, VŽNTVOLL
• Tootja: BOS