• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Width [mm]: 10
• Material: FPM (fluoride rubber)
• Tootja: JP GROUP
• Lisainfo: Oil seal, 35x48x10 mm

• Fitting Position: frontal sided
• Outer Diameter [mm]: 47
• Inner Diameter [mm]: 32
• Width [mm]: 10
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Width [mm]: 10
• Lisainfo: Oil seal, 35x48x10

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)

• Mootorikood: APX, BAM
• Installatsiooni pool: kastipoolselt
• Plokieraldus:
• Material: PTFE (polytetrafluoroethylene)
• Supplementary Article/Info 2: with mounting sleeve
• Tootja: JP GROUP
• Lisainfo: Seal flange for crankshaft, rear

• Fitting Position: frontal sided
• Weight [kg]: 0.016
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Material: ACM (Polyacrylate)
• Required quantity: 1
• Thickness [mm]: 10
• General Information: seal ring;35*48*10 mm
• Tootja: VIKA

• Fitting Position: frontal sided
• Observe service information:
• Swirl Type: Right-hand Twist
• Material: PTFE (polytetrafluoroethylene)
• Dust Cover: with dust lip
• Fabrication Number: NUP-VW-011
• Tootja: NTY

• Mootorikood: BAM, APX
• Kerenumber (VIN) kuni: ******8N*Y*007500
• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Material: ACM (Polyacrylate)
• Fitting Position: frontal sided
• Weight [kg]: 0.016
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Fabrication Number: NUP-VW-012
• Tootja: NTY

• Mootorikood: BAM, APX
• Kerenumber (VIN) kuni: 8N-Y-007500
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Dust Cover: with dust lip
• Swirl Type: Right-hand Twist
• Fitting Position: frontal sided
• Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• vajaminev tükihulk: 2
• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Alternating Twist
• Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Dust Cover: with dust lip
• Alternative Repair Kit: 325.156
• Tootja: ELRING
• Lisainfo: 325.155 ELR

• Mootorikood: APX
• Ehitusaasta alates: 07.2000
• Fitting Position: frontal sided
• Height [mm]: 10
• Material: ACM (Polyacrylate)
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Tootja: BGA

• vajaminev tükihulk: 2
• Thickness [mm]: 10
• for OE number: 068 103 085 E
• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Weight [kg]: 0.023
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: APX
• vajaminev tükihulk: 2
• Plokieraldus:
• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Swirl Type: Alternating Twist
• Nimetus: VOLLI RONGASTIHEND, NUKKVOLL
• Tootja: AJU

• Mootorikood: BAM, APX
• Installatsiooni pool: stirnseitig
• Kerenumber (VIN) alates: 8N-Y-007501
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Dust Cover: with dust lip
• Tootja: TOPRAN

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mootorikood: BAM, APX
• Installatsiooni pool: ees
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Swirl Type: Alternating Twist, Right-hand Twist
• Dust Cover: with dust lip
• Material: PTFE (polytetrafluoroethylene)
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• vajaminev tükihulk: 2
• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Alternating Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Alternative Repair Kit: 325.155
• Tootja: ELRING

• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Tootja: ELRING

• Mootorikood: APX
• Kerenumber (VIN) kuni: -> 8NY007500
• Fitting Position: frontal sided
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 48
• Inner Diameter 1 [mm]: 35
• Material: FPM (fluoride rubber)
• for OE number: 034115137A
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Nimetus: VOLLI RONGASTIHEND, OLIPUMP
• Tootja: COT

• Mootorikood: BAM
• Kogus pakendis: 10
• Fitting Position: frontal sided
• Weight [kg]: 0.035
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Tootja: DR MOTOR PRZEWODY PRZELEWOWE
• Nimetus: DRM 02227

• Fitting Position: frontal sided
• General Information: shaft oil seal
• Tootja: BORSEHUNG

• vajaminev tükihulk: 2
• Installatsiooni pool: stirnseitig
• Mootorikood: APX, BEA, BAM
• Plokieraldus:
• Material: PTFE (polytetrafluoroethylene), ACM (Polyacrylate)
• Supplementary Article/Info 2: with mounting sleeve
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: A SL
• Swirl Type: Right-hand Twist
• Nimetus: VOLLI RONGASTIHEND, NUKKVOLL
• Tootja: REI
• Lisainfo: 81-34367-00 REIN

• vajaminev tükihulk: 2
• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Observe mounting information:
• Tootja: ELRING
• Lisainfo: 129.780 ELR

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Fitting Position: Axle beam
• General Information: shaft oil seal
• Tootja: BORSEHUNG

• Mootorikood: APX
• Fitting Position: frontal sided
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Inner Diameter 1 [mm]: 32
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 038103085A
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Nimetus: VOLLI RONGASTIHEND, NUKKVOLL
• Tootja: COT
• Lisainfo: 20026413

• Mootorikood: APX, BEA, BAM
• Kerenumber (VIN) alates: ******8N*Y*007501
• Plokieraldus:
• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Fitting Position: frontal sided
• Weight [kg]: 0.01
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Radial Shaft Seal Design: ASW
• Nimetus: Volli rongastihend, V„ntvoll
• Tootja: DRM

• Mootorikood: BAM
• Ehitusaasta alates: 07.2000
• Fitting Position: frontal sided
• Height [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Tootja: BGA USZCZELKI

Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)

• Mootorikood: APX
• Installatsiooni pool: stirnseitig
• for OE number: 034115147A
• Height [mm]: 10
• Material: PTFE (polytetrafluoroethylene)
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Tootja: FAI

• Mootorikood: BAM, APX
• Thickness [mm]: 10
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Rotation Direction: Clockwise rotation
• Material: ACM (Polyacrylate), PTFE (polytetrafluoroethylene)
• Supplementary Article/Info 2: with mounting sleeve
• Fitting Position: frontal sided
• Weight [kg]: 0.01
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: stirnseitig
• Plokieraldus:
• Mootorikood: APX, BAM, BEA
• Ehitusaasta alates: 07.2000, 09.2002
• Mootori number kuni: 8NY007500
• Kerenumber (VIN) kuni: F8NY007500
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: AJU

• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Supplementary Article/Info 2: with mounting sleeve
• Observe mounting information:
• Tootja: ELRING
• Lisainfo: 155.560 ELR

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Installatsiooni pool: stirnseitig
• Mootorikood: BEA
• Material: PTFE (polytetrafluoroethylene), ACM (Polyacrylate)
• Supplementary Article/Info 2: with mounting sleeve
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: A SL
• Swirl Type: Right-hand Twist
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: REI

• Mootorikood: APX
• Fitting Position: frontal sided
• Supplementary Article/Info 2: with mounting sleeve
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 48
• Inner Diameter 1 [mm]: 35
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 038103085
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: COT

• Installatsiooni pool: kastipoolselt
• Supplementary Article/Info 2: with flange
• Swirl Type: Left-hand Twist
• Outer Diameter [mm]: 152
• Inner Diameter [mm]: 85
• Height [mm]: 15
• Tootja: DELLO AUTOMEGA

• Fitting Position: transmission sided
• Housing Type: with housing
• Housing material: Cast Aluminium
• Sealing lip material: PTFE (polytetrafluoroethylene)
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: stirnseitig
• Plokieraldus:
• Mootorikood: BAM, BEA
• Ehitusaasta alates: 07.2000, 09.2002
• Mootori number alates: 8NY007501
• Kerenumber (VIN) alates: F8NY007501
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: AJU

• Installatsiooni pool: kastipoolselt
• Mootorikood: APX, BEA
• Plokieraldus:
• Fitting Position: Rear
• Material: PTFE (polytetrafluoroethylene)
• Supplementary Article/Info 2: with flange
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: MAX

• Fitting Position: transmission sided
• Fabrication Number: NUP-VW-005
• Tootja: NTY

• Mootorikood: APX
• Installatsiooni pool: kastipoolselt
• for OE number: 038103171
• Material: PTFE (polytetrafluoroethylene)
• Tootja: FAI

• Fitting Position: Pulley side
• Nimetus: Volli rongastihendikomplekt, Mootor
• Tootja: COT

• Installatsiooni pool: stirnseitig
• vajaminev tükihulk: 2
• Mootorikood: BAM, APX
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Width [mm]: 10
• SVHC: No SVHC present!
• Tootja: INA

• vajaminev tükihulk: 2
• Plokieraldus:
• Mootorikood: BAM, BEA
• Ehitusaasta alates: 07.2000, 09.2002
• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Nimetus: VOLLI RONGASTIHEND, NUKKVOLL
• Tootja: AJU

• Fitting Position: transmission sided
• Weight [kg]: 0.16
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 131, 152
• Material: PTFE (polytetrafluoroethylene)
• Required quantity: 1
• Supplementary Article/Info 2: with flange
• Thickness [mm]: 15.7
• General Information: seal ring
• Tootja: VIKA

• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Housing Type: with housing
• Nimetus: Volli rongastihend, V„ntvoll
• Tootja: DRM

• Mootorikood: APX, BEA, BAM
• Kerenumber (VIN) alates: 8N-Y-007 501
• Plokieraldus:
• for OE number: 03G 105 021 C
• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Fitting Position: frontal sided
• Outer Diameter [mm]: 48
• Weight [kg]: 0.031
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: transmission sided
• General Information: seal ring; rear; with aluminium frame
• Tootja: VIKA

• Mootorikood: APX
• Ehitusaasta alates: 07.2000
• Fitting Position: transmission sided
• Height [mm]: 16
• Inner Diameter [mm]: 131
• Outer Diameter [mm]: 155
• Housing Type: with housing
• Tootja: BGA USZCZELKI

• Outer Diameter [mm]: 47
• Thickness [mm]: 10
• Inner Diameter [mm]: 32
• Fitting Position: transmission sided
• Weight [kg]: 0.195
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: BAM, APX
• Thickness [mm]: 15.7
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 131, 152
• Material: PTFE (polytetrafluoroethylene)
• Fitting Position: transmission sided
• Weight [kg]: 0.16
• Supplementary Article/Info 2: with flange
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: kastipoolselt
• Mootorikood: APX, BEA
• Plokieraldus:
• Material: PTFE (polytetrafluoroethylene)
• Supplementary Article/Info 2: with flange
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: REI

• Installatsiooni pool: kastipoolselt
• Inner Diameter [mm]: 85
• Radial Shaft Seal Design: IWD
• Swirl Type: Left-hand Twist
• Housing Type: with housing
• Supplementary Article/Info 2: with mounting sleeve
• Tootja: ELRING

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Mootorikood: APX
• Fitting Position: transmission sided
• Supplementary Article/Info 2: with flange, with mounting sleeve
• Height 1 [mm]: 15.7
• Outer Diameter 1 [mm]: 131
• Outer Diameter 2 [mm]: 152
• Inner Diameter 1 [mm]: 85
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 038103171B
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: COT

• Installatsiooni pool: kastipoolselt
• Plokieraldus:
• Mootorikood: APX, BAM, BEA
• Ehitusaasta alates: 07.2000, 09.2002
• Housing Type: with housing
• Inner Diameter [mm]: 131
• Outer Diameter [mm]: 152
• Height [mm]: 16
• Swirl Type: Left-hand Twist
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 06A103171A
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: AJU

• Fitting Position: transmission sided
• General Information: shaft seal; crankshaft
• Tootja: BORSEHUNG