• Kerenumber (VIN) kuni: 8G-V-004 799
• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Height 1 [mm]: 14.75
• Height 2 [mm]: 17
• Lisainfo: Wheel bearing kit, rear, for one wheel

• Kerenumber (VIN) alates: 8G-V-004 800
• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Height 1 [mm]: 14.75
• Height 2 [mm]: 17
• Tootja: JP GROUP
• Lisainfo: Wheel bearing kit, rear, for one wheel

• Kerenumber (VIN) kuni: ******8G*V*004799
• Thickness [mm]: 6.2, 7.5
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 52
• Material: NBR (nitrile butadiene rubber)
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.012
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 45
• Bearing Type: Tapered Roller Bearing
• Nimetus: Rattalaager
• Tootja: MAX

• Height [mm]: 14.7
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50.3
• Fitting Position: Front Axle
• Weight [kg]: 0.11
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kerenumber (VIN) alates: 8G-V-004 800
• Fitting Position: Rear Axle
• Width [mm]: 17
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 45
• Bearing Type: Roller Bearing
• Tootja: DELLO AUTOMEGA

• Supplementary Article/Info 2: without wheel hub
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-AU-001
• Tootja: NTY
• Nimetus: NTY KLT-AU-001

• Kerenumber (VIN) kuni: 8G-V-004 799
• Fitting Position: Rear Axle both sides
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Tootja: JPN

• Installatsiooni pool: Tagasild
• Ehitusaasta kuni: 12.1997
• Kerenumber (VIN) kuni: 8G-V004799
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Outer Diameter 2 [mm]: 45.2
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Kvaliteediklass: PJ
• Nimetus: Wheel bearing kit

• Ehitusaasta kuni: 12.1997
• Kerenumber (VIN) kuni: 8G-V004799
• Fitting Position: Rear Axle
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Outer Diameter 2 [mm]: 45.2
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: MAX

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Width 1 [mm]: 16.637
• Width 2 [mm]: 14.732
• Outer Diameter 1 [mm]: 45.237
• Outer Diameter 2 [mm]: 50.292
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Tootja: GSP

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• for OE number: 8D0598625
• Width 1 [mm]: 16.637
• Width 2 [mm]: 14.732
• Outer Diameter 1 [mm]: 45.237
• Outer Diameter 2 [mm]: 50.292
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Tootja: GSP

• Installatsiooni pool: Tagasild
• Ehitusaasta kuni: 12.1997
• Kerenumber (VIN) kuni: 8G-V004799
• Supplementary Article/Info 2: with shaft seal
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Outer Diameter 2 [mm]: 45.2
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Tootja: DENCKERMANN ZAWIESZENIE

• Alternative Repair Kit: 100 598 0101, 100 598 0101/SK
• Fitting Position: Rear Axle, inner
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50
• Height [mm]: 14.73
• Bearing Type: Tapered Roller Bearing
• Nimetus: RATTALAAGER
• Tootja: MEY

• Supplementary Article/Info 2: without wheel hub
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-AU-004
• Tootja: NTY

• Ehitusaasta kuni: 12.1997
• Kerenumber (VIN) kuni: 8G-V004799
• Installatsiooni pool: Tagasild
• vajaminev tükihulk: 2
• Tootja: DRIVE

• Installatsiooni pool: Tagasild
• Ehitusaasta alates: 01.1997
• Kerenumber (VIN) alates: 8G-V004800
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Outer Diameter 2 [mm]: 45.2
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Tootja: DENCKERMANN ZAWIESZENIE

Lisainfo: sama kui 1151300510 (vana kood) Installatsiooni pool: Tagasild mõlemapoolselt Välisläbimõõt 1 [mm]: 50 Välisläbimõõt 2 [mm]: 45 Siseläbimõõt 1 [mm]: 29 Siseläbimõõt 2 (mm): 19 Kõrgus 1 (mm): 14,75 Kõrgus 2 (mm): 17

• Kerenumber (VIN) alates: 8G-V-004800
• Fitting Position: Rear Axle
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Width 1 [mm]: 15
• Width 2 [mm]: 15
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: MAX

• Installatsiooni pool: Tagasild
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 45
• Height [mm]: 17
• Bearing Type: Tapered Roller Bearing
• Nimetus: RATTALAAGER
• Tootja: MEY

Alternative Repair Kit: 100 598 0002, 100 498 0023, 014 033 0048, 714 502 0006, 614 750 0009

• Installatsiooni pool: Tagasild
• Ehitusaasta kuni: 12.1997
• Kerenumber (VIN) kuni: 8G-V004799
• Width [mm]: 14.7
• Inner Diameter [mm]: 19.1
• Outer Diameter [mm]: 45.2
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: OPT

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kerenumber (VIN) kuni: 8G-V-004799
• Ehitusaasta kuni: 02.1997
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 15
• Outer Diameter 2 [mm]: 45
• Weight [kg]: 0.34
• Tootja: A.B.S.

• Kerenumber (VIN) kuni: ******8G*V*004799
• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 19
• Weight [kg]: 0.234
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter 1 [mm]: 19
• Outer Diameter 1 [mm]: 45
• Width 1 [mm]: 15
• Inner Diameter 2 [mm]: 29
• Outer Diameter 2 [mm]: 50
• Width 2 [mm]: 16
• Fitting Position: Rear Axle Left, Rear Axle Right
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: Tagasild
• Ehitusaasta alates: 01.1997
• Kerenumber (VIN) alates: 8G-V004800
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Outer Diameter 2 [mm]: 45.2
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Kvaliteediklass: PJ
• Nimetus: Wheel bearing kit

• Kerenumber (VIN) alates: ******8G*V*004800
• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.281
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta alates: 01.1997
• Kerenumber (VIN) alates: 8G-V004800
• Installatsiooni pool: Tagasild
• vajaminev tükihulk: 2
• Tootja: DRIVE

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Varustusaste: >Ch V-004 799
• Inner Diameter [mm]: 29
• Inner Diameter 2 [mm]: 19
• Width 1 [mm]: 14
• Width 2 [mm]: 45
• Number of mounting bores: 1
• Nimetus: DA KWD1150
• Tootja: DAYCO

• Installatsiooni pool: Tagasild
• Ehitusaasta alates: 01.1997
• Kerenumber (VIN) alates: 8G-V004800
• Width [mm]: 16.64
• Inner Diameter [mm]: 19.05
• Outer Diameter 1 [mm]: 50.29
• Tootja: METELLI LOZYSKA KOLA PIASTY

• Installatsiooni pool: Tagasild
• Ehitusaasta alates: 01.1997
• Kerenumber (VIN) alates: 8G-V-004800
• Width [mm]: 14.7
• Inner Diameter [mm]: 19.1
• Outer Diameter [mm]: 45.2
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: OPT

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Varustusaste: Ch V-004 800>
• Inner Diameter [mm]: 29
• Inner Diameter 2 [mm]: 19
• Width 1 [mm]: 14
• Width 2 [mm]: 45
• Number of mounting bores: 1
• Nimetus: DA KWD1468
• Tootja: DAYCO

• Kerenumber (VIN) alates: ******8G*V*004800
• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 19
• Weight [kg]: 0.281
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Nimetus: SW 30 92 6568
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kerenumber (VIN) kuni: ******8G*V*004799
• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 19
• Weight [kg]: 0.234
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Nimetus: SW 30 85 0008
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Kerenumber (VIN) kuni: 8G-V004799
• Ehitusaasta kuni: 12.1997
• Width [mm]: 15.49
• Inner Diameter [mm]: 19.05
• Outer Diameter 1 [mm]: 50.29
• Tootja: METELLI LOZYSKA KOLA PIASTY

• Installatsiooni pool: Tagasild
• Kerenumber (VIN) kuni: 8G-V-004799
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter 1 [mm]: 19.1
• Outer Diameter 1 [mm]: 45.2
• Width 1 [mm]: 16.6
• Inner Diameter 2 [mm]: 29
• Outer Diameter 2 [mm]: 50.3
• Width 2 [mm]: 14.7
• SVHC: No SVHC present!
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: FAG
• Lisainfo: 713 6102 40 FAG

• Installatsiooni pool: Tagasild
• Kerenumber (VIN) alates: 8G-V-004800
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter 1 [mm]: 29
• Outer Diameter 1 [mm]: 50.3
• Width 1 [mm]: 14.7
• Inner Diameter 2 [mm]: 19.1
• Outer Diameter 2 [mm]: 45.3
• Width 2 [mm]: 14.7
• SVHC: No SVHC present!
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: FAG

• Kerenumber (VIN) kuni: 8G-V-004 799
• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Height 1 [mm]: 14.73
• Height 2 [mm]: 17
• Bearing Type: Tapered Roller Bearing
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Kerenumber (VIN) alates: 8G-V-004 800
• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Height 1 [mm]: 14.73
• Height 2 [mm]: 17
• Bearing Type: Tapered Roller Bearing
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Installatsiooni pool: paremal, vasakul, Tagasild
• Outer Diameter 1 [mm]: 50
• Width 1 [mm]: 14
• Tootja: SNR
• Nimetus: SN R154.50

• Fitting Position: Rear
• General Information: wheel bearing with assembly parts; rear
• Tootja: VIKA

• Installatsiooni pool: esisild mõlemapoolselt
• Outer Diameter [mm]: 82
• Inner Diameter 1 [mm]: 45
• Inner Diameter 2 [mm]: 42.8
• Width [mm]: 37
• Bearing Type: Angular Ball Bearing
• Tootja: DELLO AUTOMEGA

• Width [mm]: 14.7, 17
• Inner Diameter [mm]: 29, 19
• Outer Diameter [mm]: 50.3, 45
• Fitting Position: Rear Axle Left, Rear Axle Right
• Tootja: METZGER

• Installatsiooni pool: Esisild
• Fitting Position: Rear Axle
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Nimetus: Rattalaagrikomplekt
• Tootja: MAX

• Ehitusaasta alates: 01.1997
• Kerenumber (VIN) alates: 8G-V004800
• Installatsiooni pool: Tagasild
• vajaminev tükihulk: 2
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Outer Diameter 2 [mm]: 45.2
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: SKF

• Installatsiooni pool: Esisild
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Tootja: DENCKERMANN ZAWIESZENIE

• Installatsiooni pool: esisild vasakul, esisild paremal
• Width 1 [mm]: 37
• Outer Diameter 1 [mm]: 82
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Tootja: GSP

• Fitting Position: Front Axle
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Bearing Type: Ball Bearing
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: MAX

• Fitting Position: Front Axle
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Inner Diameter [mm]: 43
• Weight [kg]: 0.768
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Esisild
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter 1 [mm]: 82
• Tootja: METELLI LOZYSKA KOLA PIASTY

• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Tootja: DRIVE

• Installatsiooni pool: Esisild
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Kvaliteediklass: PJ
• Nimetus: Wheel bearing kit

• Fitting Position: Front Axle
• Width [mm]: 37
• Weight [kg]: 0.84
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Tootja: METALCAUCHO

• Outer Diameter [mm]: 82
• Quantity Unit: Set
• Inner Diameter [mm]: 43
• Fitting Position: Front Axle
• Weight [kg]: 0.694
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Varustusaste: FRRE LR+FR
• Inner Diameter [mm]: 43
• Width 1 [mm]: 37
• Number of mounting bores: 1
• Nimetus: DA KWD1060
• Tootja: DAYCO

• Installatsiooni pool: Esisild
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Inner Diameter 2 [mm]: 45
• Tootja: OPTIMAL

• Installatsiooni pool: Esisild
• Alternative Repair Kit: 100 498 0037
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Nimetus: RATTALAAGER
• Tootja: MEY

• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.65
• Supplementary Article/Supplementary Info: with nuts, with motor shaft screw
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Siseläbimõõt 1 [mm]: 43
• Siseläbimõõt 2 (mm): 45
• Kaal (kg): 0,84
• Välisläbimõõt 1 [mm]: 82
• Laius 1 (mm): 37
• Tootja: A.B.S.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Installatsiooni pool: paremal, vasakul, Esisild
• Nimetus: SN R157.11
• Tootja: NTN-SNR

• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: SKF

• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Width [mm]: 37
• Fitting Position: Front Axle Left, Front Axle Right
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Ehitusaasta alates: 01.1994
• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Weight [kg]: 1.056
• Packaging length [cm]: 10.9
• Packaging width [cm]: 8.4
• Packaging height [cm]: 10.9
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 43
• Width [mm]: 37
• Tootja: CONTITECH-LOÅ»YSKA KÓŁ

• Installatsiooni pool: Esisild
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Width [mm]: 37
• SVHC: No SVHC present!
• Tootja: FAG