• Fitting Position: Front Axle both sides
• Number of Teeth: 45
• Width [mm]: 11
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 81
• Fabrication Number: NZA-AU-001
• Tootja: NTY
• Nimetus: NTY NZA-AU-001
• Lisainfo: 45 T 81 MM / 77 MM / 11 MM

• Fitting Position: Front Axle
• Number of Teeth: 45
• Inner Diameter [mm]: 77
• Thickness [mm]: 11
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle both sides
• Number of Teeth: 45
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 81
• Width [mm]: 11
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: Esisild
• Inner Diameter [mm]: 76.8
• Width [mm]: 11
• Outer Diameter [mm]: 80.7
• Number of Teeth, ABS ring: 45
• Tootja: TRISCAN
• Lisainfo: VAG

• Installatsiooni pool: Tagasild mõlemapoolselt, Tagasild
• Plokieraldus:
• Inner Diameter [mm]: 67
• Width [mm]: 11
• Outer Diameter [mm]: 106.8
• Number of Teeth, ABS ring: 45
• Tootja: TRISCAN
• Lisainfo: AUDI

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-003
• Tootja: NTY

• Cable Length [mm]: 1,035
• Sensor Type: Passive sensor
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-004
• Tootja: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-AU-002
• Tootja: NTY
• Nimetus: NTY HCA-AU-002

• Ehitusaasta alates: 06.2003
• Fitting Position: Front Axle
• Resistor [Ohm]: 1,700
• for OE number: 8E0927803B
• Number of mounting bores: 1
• Nimetus: MM MWSS029
• Tootja: MAGNETI MARELLI

• Ehitusaasta kuni: 05.2004
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 1,330
• Resistor [Ohm]: 1,750
• Number of pins: 2
• Tootja: MAGNETI MARELLI
• Nimetus: MM MWSS124

• Kerenumber (VIN) alates: 8E-4-000 001
• Fitting Position: Front Axle both sides
• Number of connectors: 2
• Tootja: JPN

• Kerenumber (VIN) alates: 8E-4-000 001
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Inductive Sensor
• Lisainfo: ABS sensor, front, left/right

• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,015
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Kerenumber (VIN) alates: 8E-1-000 001
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Plokieraldus:
• Sõidukivarustus: kurvituledega sõidukile
• Sensor Type: Hall Sensor
• Tootja: JP GROUP
• Lisainfo: Sensor, wheel speed

• Installatsiooni pool: Tagasild, vasakul, paremal
• Kerenumber (VIN) kuni: 8E4400000
• PR-numbri jaoks: 8Q0, 8Q1, 8Q3
• Plokieraldus:
• Sõidukivarustus: ksenoontulega sõidukile
• Colour: black
• Sensor Type: Passive sensor
• Length [mm]: 1,360
• Tootja: JPN

• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,005
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,390
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ehitusaasta alates: 04.2002
• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele e(automaatne)
• Fitting Position: Rear Axle
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 06SKV352
• Tootja: ESEN SKV

• Sensor Type: Passive sensor
• Number of pins: 2
• Cable Length [mm]: 957
• Fitting Position: Front Axle Right, Front Axle Left
• Tootja: AUTOFREN SEINSA
• Nimetus: SE DS0086

• Kerenumber (VIN) kuni: 8E-3-350 000
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Inductive Sensor
• Tootja: JP GROUP
• Lisainfo: ABS sensor, front, left/right

• Kerenumber (VIN) alates: 8E_4_000001
• Installatsiooni pool: Esisild
• Tootja: DELLO AUTOMEGA

• Ehitusaasta alates: 06.2003
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,040
• Vehicle Equipment: for vehicles with automatic climate control
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Tagasild, vasakul
• Kerenumber (VIN) kuni: 8E4400000
• Sõidukivarustus: ksenoontulega sõidukile
• PR-numbri jaoks: 8Q3
• Colour: black
• Sensor Type: Passive sensor
• Length [mm]: 1,300
• Tootja: JPN

• Kerenumber (VIN) alates: 8E5000001
• PR-numbri jaoks: 8Q3
• Fitting Position: Rear Axle Left
• Sensor Type: Passive sensor
• Length [mm]: 1,195
• Socket colour: black

• Installatsiooni pool: Tagasild paremal
• Number of pins: 2
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,330
• Tootja: AUTOFREN SEINSA
• Nimetus: SE DS0096

• Kerenumber (VIN) kuni: 8E-4-400 000
• Fitting Position: Front Axle Right, Rear Axle Right
• Sensor Type: Inductive Sensor
• Tootja: JP GROUP
• Lisainfo: ABS sensor, rear, left/right

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Tootja: AUTO-GH

• Ehitusaasta kuni: 05.2003
• Fitting Position: Front Axle
• Resistor [Ohm]: 1,650
• for OE number: 8E0927803A
• Number of pins: 7
• Number of mounting bores: 1
• Tootja: MAGNETI MARELLI
• Nimetus: MM MWSS031

• Kerenumber (VIN) kuni: 8E-3-500 000
• Fitting Position: Front Axle both sides
• Number of connectors: 4, 2
• Tootja: JPN

• Ehitusaasta kuni: 05.2003
• vajaminev tükihulk: 2
• Kerenumber (VIN) alates: 8E_1_000001
• Kerenumber (VIN) kuni: 8E_3_500000
• Installatsiooni pool: Esisild
• Tootja: DELLO AUTOMEGA

• Ehitusaasta alates: 06.2004
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 1,380
• Number of pins: 2
• Tootja: MAGNETI MARELLI
• Nimetus: MM MWSS126

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kerenumber (VIN) kuni: 8E-4-400000
• Plokieraldus:
• Supplementary Article/Info 2: with cable, with rubber grommet
• Length [mm]: 1,420
• Vehicle Equipment: for vehicles with automatic climate control
• Tootja: TOPRAN

Sõidukivarustus: ilma tulekaugusregulaatorita sõidukitele (automaatne), tulekaugusregulaatoriga sõidukitele e(automaatne) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left
• Number of pins: 2
• Cable Length [mm]: 1,307
• Sensor Type: Passive sensor
• Tootja: AUTOFREN SEINSA
• Nimetus: SE DS0241

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kerenumber (VIN) alates: 8E-5-000001
• PR-numbri jaoks: 8Q0, 8Q1, 8Q3, 8Q5
• Plokieraldus:
• Supplementary Article/Info 2: with cable, with rubber grommet
• Length [mm]: 1,450
• Vehicle Equipment: for vehicles with automatic climate control
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Ehitusaasta kuni: 05.2003
• Fitting Position: Front Axle
• Length [mm]: 980
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.16
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 06SKV026

• Fitting Position: Front Axle
• Length [mm]: 975
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 06SKV038

• Installatsiooni pool: Esisild
• Sensor Type: Passive sensor
• Number of occupied pins: 4
• Cable Length [mm]: 1,035
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE SS20037
• Kvaliteediklass: PJ

• Kerenumber (VIN) alates: 8E-5-000 001, 8E-5-000 0012
• Installatsiooni pool: Tagasild mõlemapoolselt, Tagasild paremal
• PR-numbri jaoks: 8Q0, 8Q1, 8Q3
• Plokieraldus:
• Cable Length [mm]: 1,365
• Number of connectors: 2
• Tootja: JPN

• Installatsiooni pool: Esisild
• Kerenumber (VIN) alates: 8E-4-000 001
• Overall Length [mm]: 1,050
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,000
• paired article number: 30010
• Weight [kg]: 0.13
• Tootja: A.B.S.

• Installatsiooni pool: Tagasild
• Kerenumber (VIN) alates: 8E5000001
• PR-numbri jaoks: 8Q0, 8Q1
• Overall Length [mm]: 1,440
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Weight [kg]: 0.2
• Cable Length [mm]: 1,370
• Tootja: A.B.S.

• Kerenumber (VIN) alates: 8E..5..000 001
• Fitting Position: Rear Axle
• Guarantee: 5 years guarantee
• Nimetus: HU 131407
• Tootja: HUECO / HITACHI

• Installatsiooni pool: Tagasild vasakul
• Sõidukivarustus: ksenoontulega sõidukile
• Kerenumber (VIN) kuni: 8E_4_400000
• PR-numbri jaoks: 8Q3
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,370
• Nimetus: DE SS21127-12B1
• Tootja: DELPHI

• Installatsiooni pool: Esisild
• Kerenumber (VIN) kuni: 8E-3-500 000
• Overall Length [mm]: 1,050
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,000
• paired article number: 30009
• Weight [kg]: 0.13
• Tootja: A.B.S.

• Hulk: 1, 2
• Kerenumber (VIN) alates: 8E-5-000 001
• Cable Length [mm]: 1,197
• Fitting Position: Rear Axle
• General Information: ABS speed sensor; rear
• Tootja: VIKA

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Sensor Type: Passive sensor
• Number of pins: 2
• Cable Length [mm]: 1,372
• Tootja: AUTOFREN SEINSA
• Nimetus: SE DS0030

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Tootja: AUTO-GH

• Installatsiooni pool: Tagasild vasakul
• Sõidukivarustus: ksenoontulega sõidukile
• Hulk: 1
• PR-numbri jaoks: 8Q3
• Kerenumber (VIN) alates: 8E5000001
• Sensor Type: Passive sensor
• Number of occupied pins: 6
• Nimetus: DE SS21352-12B1
• Tootja: DELPHI

• Kerenumber (VIN) kuni: 8E...4...400 000
• Ehitusaasta kuni: 05.2004
• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele e(automaatne)
• Fitting Position: Rear Axle Left, Rear Axle Right
• Number of pins: 2
• Connector Shape: rectangular
• Sensor Type: Inductive Sensor
• Cable Length [mm]: 1,330
• for OE number: 8E0927807B
• Tootja: MEAT&DORIA

• Installatsiooni pool: Esisild
• Kerenumber (VIN) alates: 8E-4-000001>8E-5-400
• Sensor Type: Passive sensor
• Number of occupied pins: 4
• Cable Length [mm]: 1,035
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE SS20197
• Kvaliteediklass: PJ

• Installatsiooni pool: Tagasild
• Kerenumber (VIN) kuni: 8E4400000
• PR-numbri jaoks: 8Q0, 8Q1
• Overall Length [mm]: 1,400
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,330
• paired article number: 30831
• Weight [kg]: 0.2
• Tootja: A.B.S.

• Installatsiooni pool: Tagasild vasakul
• Kerenumber (VIN) alates: 8E-5-000001
• PR-numbri jaoks: 8Q3
• Sensor Type: Inductive Sensor
• Length 1 [mm]: 925
• Length 2 [mm]: 1,355
• Overall Length [mm]: 1,445
• Connector Shape: oval
• Tootja: TOPRAN

Supplementary Article/Info 2: with cable, with buckle protection, with rubber grommet Vehicle Equipment: for vehicles with automatic climate control, for vehicles with headlight levelling (automatic) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Ehitusaasta alates: 06.2003
• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 28
• Fitting Position: Front Axle Right, Front Axle Left
• Overall Length [mm]: 980
• Length [mm]: 380
• for OE number: 8E0927803B
• Tootja: MEAT&DORIA

• Kerenumber (VIN) kuni: 8E-4-400 000
• vajaminev tükihulk: 1
• Installatsiooni pool: Tagasild paremal
• Supplementary Article/Info 2: with cable
• Tootja: BREMI

• Kerenumber (VIN) alates: 8E-5-000 001
• vajaminev tükihulk: 1
• Installatsiooni pool: Tagasild paremal
• Supplementary Article/Info 2: with cable
• Tootja: BREMI

• PR-numbri jaoks: 8Q0, 8Q1, 8Q3, 8Q5
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Plokieraldus:
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Resistor [Ohm]: 1,650
• Cable Length [mm]: 1,360
• Sensor Type: Hall Sensor, Passive sensor
• Number of pins: 2
• Weight [kg]: 0.138
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Tagasild, Tagasild paremal
• Kerenumber (VIN) kuni: 8E_4_400000
• PR-numbri jaoks: 8Q0, 8Q1, 8Q3
• Plokieraldus:
• Sõidukivarustus: ksenoontulega sõidukile
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,370
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE SS20286
• Kvaliteediklass: PJ

• Kerenumber (VIN) alates: 8E-4-000 001
• vajaminev tükihulk: 2
• Installatsiooni pool: Esisild
• Supplementary Article/Info 2: with cable
• Tootja: BREMI

• Kerenumber (VIN) kuni: 8E-3-500 000
• vajaminev tükihulk: 2
• Installatsiooni pool: Esisild
• Supplementary Article/Info 2: with cable
• Tootja: BREMI

• Installatsiooni pool: Tagasild
• vajaminev tükihulk: 2
• Kerenumber (VIN) alates: 8E_5_000001
• PR-numbri jaoks: 8Q0, 8Q1
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 1,370
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PU012806891
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Ehitusaasta alates: 08.2004
• Fitting Position: Rear Axle
• Length [mm]: 1,385
• Number of pins: 2
• Plug Type: Female
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.17
• Operating Mode: Electric
• Socket colour: black
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 06SKV338

• Guarantee: 3 years guarantee
• Weight [kg]: 0.34
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 96SKV136
• Tootja: ESEN SKV

• Installatsiooni pool: Tagasild vasakul
• Kerenumber (VIN) kuni: 8E4400000
• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele e(automaatne)
• PR-numbri jaoks: 8Q3
• Overall Length [mm]: 1,400
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,330
• Wear Warning Contact: prepared for wear warning indicator
• paired article number: 30546
• Weight [kg]: 0.27
• Tootja: A.B.S.

• General Information: brake oil tank
• Tootja: VIKA

• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele e(automaatne)
• Kerenumber (VIN) kuni: 8E-4-400000
• PR-numbri jaoks: 8Q3
• Fitting Position: Rear Axle Left
• Number of pins: 2, 6
• Supplementary Article/Info 2: with cable, with buckle protection
• Length [mm]: 1,420
• Vehicle Equipment: for vehicles with automatic climate control
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Kerenumber (VIN) alates: ******8E*5*000001
• Installatsiooni pool: Tagasild, Tagasild paremal
• PR-numbri jaoks: 8Q0, 8Q1, 8Q3
• Plokieraldus:
• paired article number: 104173
• Number of connectors: 2
• Resistor [Ohm]: 1,700
• Cable Length [mm]: 1,365
• Weight [kg]: 0.14
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta kuni: 05.2004
• Fitting Position: Rear Axle Left
• Resistor [Ohm]: 1,750
• Tootja: MAGNETI MARELLI
• Nimetus: MM MWSS125

• Kerenumber (VIN) alates: ******8E*4*000001
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.121
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Hulk: 2
• Kerenumber (VIN) alates: 8E-4-000 001
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 1,035
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Height [mm]: 28
• Required quantity: 2
• Resistor [Ohm]: 1,750
• Cable Length [mm]: 1,000
• Sensor Type: Inductive Sensor, Passive sensor
• Number of pins: 4
• Number of connectors: 2
• Weight [kg]: 0.126
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Tagasild, Tagasild paremal
• Kerenumber (VIN) alates: 8E_5_000001
• PR-numbri jaoks: 8Q0, 8Q1, 8Q3
• Plokieraldus:
• Sõidukivarustus: ksenoontulega sõidukile
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,370
• Tootja: DELPHI
• Nimetus: DE SS20406
• Kvaliteediklass: PJ

• Kerenumber (VIN) kuni: ******8E*3*500000
• Number of connectors: 4, 2
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.12
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.