• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Width [mm]: 10
• Material: FPM (fluoride rubber)
• Tootja: JP GROUP
• Lisainfo: Oil seal, 35x48x10 mm

• Fitting Position: frontal sided
• Outer Diameter [mm]: 47
• Inner Diameter [mm]: 32
• Width [mm]: 10
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Width [mm]: 10
• Tootja: JP GROUP
• Lisainfo: Oil seal, 35x48x10

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)

• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Thickness [mm]: 11
• Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Lisainfo: Oil seal for crankshaft, 85x105x11 mm

• Fitting Position: frontal sided
• Weight [kg]: 0.016
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Material: ACM (Polyacrylate)
• Required quantity: 1
• Thickness [mm]: 10
• General Information: seal ring;35*48*10 mm
• Tootja: VIKA

• Installatsiooni pool: stirnseitig
• vajaminev tükihulk: 4
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Width [mm]: 10
• SVHC: No SVHC present!
• Tootja: INA

• Fitting Position: frontal sided
• Observe service information:
• Swirl Type: Right-hand Twist
• Material: PTFE (polytetrafluoroethylene)
• Dust Cover: with dust lip
• Fabrication Number: NUP-VW-011
• Tootja: NTY

• Fitting Position: Front
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Fabrication Number: NUP-VW-012
• Tootja: NTY

• vajaminev tükihulk: 4
• Installatsiooni pool: stirnseitig
• Mootorikood: AMM
• Material: FPM (fluoride rubber)
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: A SL
• Swirl Type: Alternating Twist
• Tootja: REINZ
• Nimetus: RN 81-19299-10
• Lisainfo: 81-19299-10

• vajaminev tükihulk: 4
• Installatsiooni pool: stirnseitig, kastipoolselt
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Alternating Twist
• Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Dust Cover: with dust lip
• Alternative Repair Kit: 325.156
• Tootja: ELRING
• Lisainfo: 325.155 ELR

• Kerenumber (VIN) alates: 4B-Y-036000
• Fitting Position: frontal sided
• Height [mm]: 10
• Material: ACM (Polyacrylate)
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Tootja: BGA

• vajaminev tükihulk: 4
• Thickness [mm]: 10
• for OE number: 068 103 085 E
• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Weight [kg]: 0.023
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: AMM
• Plokieraldus:
• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Swirl Type: Alternating Twist
• Tootja: AJUSA

• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Dust Cover: with dust lip
• Tootja: TOPRAN

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: ees
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Swirl Type: Alternating Twist, Right-hand Twist
• Dust Cover: with dust lip
• Material: PTFE (polytetrafluoroethylene)
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Fitting Position: Cylinder Head
• Dust Cover: with dust lip
• Swirl Type: Left-hand Twist
• Material: PTFE (polytetrafluoroethylene)
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• vajaminev tükihulk: 4
• Installatsiooni pool: stirnseitig, kastipoolselt
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Alternating Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Alternative Repair Kit: 325.155
• Tootja: ELRING

• Installatsiooni pool: stirnseitig
• Mootorikood: AMM
• Material: FPM (fluoride rubber)
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: A SL
• Swirl Type: Right-hand Twist
• Tootja: REINZ
• Nimetus: RN 81-24292-10

• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Tootja: ELRING

• Fitting Position: Cylinder Head
• General Information: sealing flang; front
• Tootja: VIKA

• Fitting Position: Front
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Fabrication Number: NUP-AU-003
• Tootja: NTY

• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Dust Cover: with dust lip
• Tootja: ELRING

• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Tootja: DR MOTOR PRZEWODY PRZELEWOWE
• Nimetus: DRM 02227

• Mootorikood: AMM
• Installatsiooni pool: stirnseitig
• for OE number: MN980030
• Height [mm]: 10
• Material: PTFE (polytetrafluoroethylene)
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Rotation Direction: Clockwise rotation
• Tootja: FAI

• Fitting Position: frontal sided
• General Information: shaft oil seal
• Tootja: BORSEHUNG

• Installatsiooni pool: stirnseitig
• vajaminev tükihulk: 3
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Observe mounting information:
• Tootja: ELRING
• Lisainfo: 129.780 ELR

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Mootorikood: AMM
• Fitting Position: frontal sided
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Inner Diameter 1 [mm]: 32
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 038103085A
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Tootja: CORTECO
• Lisainfo: 20026413

• Installatsiooni pool: kastipoolselt
• vajaminev tükihulk: 1
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Left-hand Twist
• Dust Cover: with dust lip
• Observe mounting information:
• Tootja: ELRING

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Thickness [mm]: 11
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Material: FPM (fluoride rubber)
• Fitting Position: transmission sided
• Weight [kg]: 0.058
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Axle beam
• General Information: shaft oil seal
• Tootja: BORSEHUNG

• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Fitting Position: frontal sided
• Weight [kg]: 0.01
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Radial Shaft Seal Design: ASW
• Tootja: DR MOTOR PRZEWODY PRZELEWOWE
• Nimetus: DRM 01969

• Fitting Position: frontal sided
• Height [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Tootja: BGA USZCZELKI

Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)

• Mootorikood: AMM
• Installatsiooni pool: stirnseitig
• for OE number: 034115147A
• Height [mm]: 10
• Material: PTFE (polytetrafluoroethylene)
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Tootja: FAI

• Thickness [mm]: 10
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Rotation Direction: Clockwise rotation
• Material: ACM (Polyacrylate), PTFE (polytetrafluoroethylene)
• Supplementary Article/Info 2: with mounting sleeve
• Fitting Position: frontal sided
• Weight [kg]: 0.01
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Supplementary Article/Info 2: with mounting sleeve
• Observe mounting information:
• Tootja: ELRING
• Lisainfo: 155.560 ELR

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Mootorikood: AMM
• Fitting Position: frontal sided
• Supplementary Article/Info 2: with mounting sleeve
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 48
• Inner Diameter 1 [mm]: 35
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 038103085
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Tootja: CORTECO
• Nimetus: CO 20026412

• Installatsiooni pool: kastipoolselt
• vajaminev tükihulk: 1
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW OF
• Swirl Type: Left-hand Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Tootja: ELRING

• Installatsiooni pool: stirnseitig
• Mootorikood: AMM
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Tootja: AJUSA

• Mootorikood: AMM
• Installatsiooni pool: taga
• Fitting Position: Engine
• Supplementary Article/Info 2: with mounting sleeves
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Inner Diameter 1 [mm]: 32
• Swirl Type: Left-hand Twist
• Dust Cover: with dust lip
• Nimetus: CO 19037038
• Tootja: CORTECO

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)

• Installatsiooni pool: kastipoolselt
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Height [mm]: 12
• Radial Shaft Seal Design: AW/BS
• Swirl Type: Left-hand Twist
• Dust Cover: with dust lip
• Observe mounting information:
• Supplementary Article/Info 2: with mounting sleeve
• Tootja: ELRING

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Mootorikood: AMM
• vajaminev tükihulk: 3
• Plokieraldus:
• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Tootja: AJUSA

• for OE number: 03G 105 021 C
• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Fitting Position: frontal sided
• Outer Diameter [mm]: 48
• Weight [kg]: 0.031
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Outer Diameter [mm]: 47
• Thickness [mm]: 10
• Inner Diameter [mm]: 32
• Fitting Position: transmission sided
• Weight [kg]: 0.195
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: transmission sided
• Weight [kg]: 0.418
• Inner Diameter [mm]: 85
• Required quantity: 1
• Supplementary Article/Info 2: with flange
• General Information: seal ring
• Tootja: VIKA

• Inner Diameter [mm]: 85
• Material: PTFE (polytetrafluoroethylene)
• Fitting Position: transmission sided
• Weight [kg]: 0.418
• Supplementary Article/Info 2: with flange
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: transmission sided
• Supplementary Article/Info 2: with flange, with mounting sleeve
• Height 1 [mm]: 14.3
• Outer Diameter 1 [mm]: 158.2
• Outer Diameter 2 [mm]: 235
• Inner Diameter 1 [mm]: 85
• for OE number: 078103171L
• Nimetus: CO 19036697
• Tootja: CORTECO

Material: TFE (tetrafluorethylene)/ACM (polyacryl-rubber)/non-woven