• Tootja: JP GROUP
• Lisainfo: Water Pump

Lisainfo: Water pump

• Supplementary Article/Info 2: with plug
• Number of pins: 2
• for OE number: 4F0973702
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• for OE number: 4F0973702
• Nimetus: Kaabli remondikomplekt, lisaveepump
• Tootja: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: CPW-VW-036
• Tootja: NTY

• Water Pump Type: for timing belt drive
• Operating Mode: Mechanical
• Nimetus: VEEPUMP
• Tootja: MAX

• Number of Teeth: 19
• Impeller Diameter [mm]: 63.6
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Nimetus: VEEPUMP
• Tootja: MAX

• Supplementary Article/Supplementary Info: with gasket/seal
• Tootja: BGA

• Overall Height [mm]: 100
• Number of Teeth: 19
• Tootja: ASHIKA

• Number of Teeth: 19
• Tootja: JPN

• General Information: water pump
• Tootja: VIKA

• General Information: water pump
• Tootja: VIKA

• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 7
• Water Pump Pulley Diameter [mm]: 56.23
• Impeller Diameter [mm]: 64
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Nimetus: VEEPUMP
• Tootja: GRA

• Varustusaste: TB
• OE-numbri jaoks: 038121011J
• Weight [kg]: 0.9
• Nimetus: VEEPUMP
• Tootja: DAY
• Lisainfo: DP064

• Uus osa:
• Weight [kg]: 0.78
• Nimetus: DO A251
• Tootja: DOLZ

• Number of Teeth: 19
• Number of blades/vanes: 8
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• Nimetus: Water pump
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
SHARAN
(kvaliteediklass: PJ)"

• Water pump impeller material: Metal
• Seal Material: Rubber
• Number of grooves: 19
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.717
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Nimetus: VEEPUMP
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth: 19
• Water Pump Pulley Diameter [mm]: 56
• Impeller Diameter [mm]: 64
• Number of blades/vanes: 7
• Operating Mode: Mechanical
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Nimetus: Water pump
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
SUPERB, 02.02-
(kvaliteediklass: PJ)"

• Packaging length [cm]: 11.2
• Packaging width [cm]: 11.2
• Packaging height [cm]: 11.2
• Weight [kg]: 0.76
• Tootja: AKSDASIS

• Mootorikood: CAHA
• Tootja: MAGNETI MARELLI

• Weight [kg]: 0.81
• Nimetus: AI 1998
• Tootja: AIRTEX

• Voltage [V]: 12
• Operating Mode: Electric
• Fabrication Number: CPZ-AU-025
• Tootja: NTY

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Nimetus: VEEPUMP
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: CAHA
• Tootja: MAGNETI MARELLI
• Nimetus: MM WPQ1206

• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• SVHC: No SVHC present!
• Nimetus: VEEPUMP
• Tootja: INA

• Water pump impeller material: Metal
• Seal Material: Rubber
• Number of grooves: 19
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.717
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Nimetus: SW 32 92 4360
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 1.909
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Supplementary Article/Supplementary Info: with gasket/seal
• Tootja: CONTITECH-POMPY WODY

• Impeller Diameter [mm]: 63.6
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Technical Information: SKF Aquamax
• Nimetus: VEEPUMP
• Tootja: SKF

• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• for OE number: 03G 121 011X
• Nimetus: Water pump
• Kvaliteediklass: PJ

Water pump impeller material: PPS (polyphen. sulfide)/TFE (tetrafluoroet.)/ACM (polyacryl) Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"

• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of Teeth: 19
• Water Pump Pulley Diameter [mm]: 56
• Impeller Diameter [mm]: 64
• Number of blades/vanes: 7
• Water pump impeller material: Metal
• Tootja: HEPU

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Nimetus: Kaabli remondikomplekt, heitgaasi rohuandur
• Tootja: HBE

• Mootorikood: CAHA
• OE-numbri jaoks: 03L 121 011 G
• Operating Mode: Mechanical
• Water pump impeller material: Plastic
• Supplementary Article/Info 2: with seal ring
• Tootja: PIERBURG

• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Belt Pulley Ø [mm]: 56.2
• Weight [kg]: 0.8
• Tootja: VALEO

• Ehitusaasta kuni: 12.2012
• Voltage [V]: 12
• Operating Mode: Electric
• for OE number: 03L965561
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Voltage [V]: 12
• for OE number: 8K0 965 561
• Operating Mode: Electric
• Fabrication Number: CPZ-AU-022
• Tootja: NTY

Lisainfo: AUDI A4 B8 2.0/ 3.0TDI 09-, A5 8T3 1.8/2.0/3.0TFSI, 2.0/2.7/3.0TDI, 3.2FI, S5 3.0/4.2 07-, Q5 8RB 2.0/3.0TDI, 2.0/3.0TFSI 08-

• General Information: solenoid valve
• Tootja: VIKA

• Supplementary Article/Supplementary Info: with gasket/seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• reinforced version:
• Observe service information:
• Quality: Sealed with SiC/SiC
• Water pump impeller material: Metal
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Housing material: Stainless Steel
• Chemical Properties: Heat-resistant
• Nimetus: VEEPUMP
• Tootja: MEY

General Information: Water pump bearing in OE quality, according to application: 4-point roller/ball: Best distribution of high radial forces as well as increased axial support or Angular contact: Absorption of axial and medium radial forces as well as increased axial support.

• Mootorikood: CAHA
• Tootja: MAGNETI MARELLI

• Number of connectors: 3
• Weight [kg]: 0.215
• for OE number: 03L 965 561
• Observe service information:
• Nimetus: Lisaveepump
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric
• Nimetus: Lisaveepump
• Tootja: NRF

• for OE number: 8K0965561A
• Operating Mode: Electric
• Supplementary Article/Info 2: with mounting parts
• Nimetus: Lisaveepump
• Tootja: NRF

• Mootorikood: CAHA
• Kerenumber (VIN) alates: 8K-8-000001
• Tootja: MAGNETI MARELLI

• Mootorikood: CAHA
• Kerenumber (VIN) alates: 8K-8-000 001
• Mudeliaasta kuni: 2012
• Operating Mode: Electric
• Voltage [V]: 12
• Nimetus: Lisaveepump
• Tootja: PIE

Vehicle Equipment: for vehicles with start-stop function and recuperation

• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 03L 965 561
• Tootja: HEPU POMPY WODY

• Mootorikood: CAHA
• Kerenumber (VIN) alates: 8K-8-000 001
• Operating Mode: Electric
• Voltage [V]: 12
• Nimetus: Lisaveepump
• Tootja: PIE

• Ehitusaasta kuni: 01.2012
• Length [mm]: 1,524
• Number of Teeth: 160
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 2
• Nimetus: VEEPUMP HAMMASRIHMAKOMPLEKT
• Tootja: BOS

• Ehitusaasta kuni: 12.2012
• Mootorikood: CAHA
• OE-numbri jaoks: 3L 965 561
• Operating Mode: Electric
• Voltage [V]: 12
• Nimetus: LISAVEEPUMP
• Tootja: PIE

• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 2
• Water pump impeller material: Plastic
• Belt Width [mm]: 30
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with studs
• Number of Teeth: 160
• Belts: with rounded tooth profile
• Nimetus: VEEPUMP HAMMASRIHMAKOMPLEKT
• Tootja: SKF

• Number of Teeth: 160
• Width [mm]: 30
• Number of belts: 1
• Weight [kg]: 3.05
• for article number: A251
• Tootja: DOLZ

• Weight [kg]: 2.96
• Number of belts: 1
• Nimetus: AI WPK-199808
• Tootja: AIRTEX

• Number of Teeth 1: 160
• Width 1 [mm]: 30
• Supplementary Article/Supplementary Info: with water pump
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Nimetus: VEEPUMP HAMMASRIHMAKOMPLEKT
• Tootja: INA

• Water pump impeller material: Metal
• Number of Teeth: 160
• Belts: with rounded tooth profile
• Weight [kg]: 2.56
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of belts: 1
• Number of track rollers: 4
• Width 1 [mm]: 30
• Number of Teeth: 160
• Tootja: SNR
• Nimetus: SN KDP457.670

• Vedavad seadmed: Nukkvõll
• Soovitatava eritööriista tootenumber: GAT4840A, GAT4844, GAT4741
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Nimetus: Veepump hammasrihmakomplekt
• Tootja: GAT
• Lisainfo: KP15648XS-1 GAT

• Vedavad seadmed: Nukkvõll
• Varustusaste: HT -CAHA # CA
• Hammastehulk: 160
• Laius (mm): 30
• Pikkus (mm): 1 524
• Rihmade arv: 1
• sisaldab rulle: 4
• Weight [kg]: 3.1
• Nimetus: VEEPUMP HAMMASRIHMAKOMPLEKT
• Tootja: DAY

• Number of belts: 1
• Width [mm]: 30
• Number of Teeth: 160
• Pulleys contained: 4
• Tootja: HEPU ZESTAWY ROZRZĄDU

• Vedavad seadmed: Nukkvõll
• Mootorikood: CAHA, CAHB
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 160
• Weight [kg]: 2.519
• Width [mm]: 30
• Nimetus: VEEPUMP HAMMASRIHMAKOMPLEKT
• Tootja: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Number of Teeth: 160
• Width [mm]: 30
• Number of belts: 1
• for article number: 570059N
• Packaging length [cm]: 28
• Packaging width [cm]: 17.5
• Packaging height [cm]: 17.5
• Weight [kg]: 3.05