Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Kogus pakendis: 10
- Inner Diameter [mm]: 28.5
- Sealing Ring Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Nimetus: RONGASTIHEND
- Tootja: HAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Kogus pakendis: 10
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Sõidukivarustus: sõidukitele koos/
ilma kliimaseade - Ehitusaasta alates: 04.2012
- Netosügavus [mm]: 26
- Netopikkus [mm]: 235
- Netolaius [mm]: 189
- Radiaatori tüüp: Jahutusribid joodetud
- Materjal veekamber (radiaator): Plastik
- Tehniline informatsioon: left
- Kvaliteediklass: PJ
- Nimetus: Radiator
Lisainfo: A4 (kvaliteediklass PJ)
-
Installatsiooni pool: ees vasakul,
ees paremal - Küte/Jahutus: Lisaradiaator
- Mootorikood: CGTA
- Plokieraldus:
- Core Depth [mm]: 26
- Core Length [mm]: 235
- Core Width [mm]: 188
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Käigukasti liik: Automaatkäigukast
-
Sõidukivarustus: sõidukitele koos/
ilma kliimaseade - Ehitusaasta alates: 04.2012
- Ehitusaasta kuni: 01.2018
- Netosügavus [mm]: 16
- Netopikkus [mm]: 615
- Netolaius [mm]: 428
- Radiaatori tüüp: Jahutusribid joodetud
- Materjal veekamber (radiaator): Alumiinium
- Tehniline informatsioon: auxiliary radiator
- Kvaliteediklass: PJ
- Nimetus: Radiator
- Käigukasti liik: Automaatkäigukast
-
Sõidukivarustus: sõidukitele koos/
ilma kliimaseade - Netosügavus [mm]: 32
- Netopikkus [mm]: 720
- Netolaius [mm]: 468
- Radiaatori tüüp: Jahutusribid joodetud
- Materjal veekamber (radiaator): Plastik
-
Tehniline informatsioon: quick connection inlet/
outlet - Nimetus: Radiator
- Kvaliteediklass: PJ
Lisainfo: A8, 10- (kvaliteediklass PJ)
- Radiator type: Brazed cooling fins
- Heating/Cooling: for vehicles with auxiliary cooler
- Core Length [mm]: 235
- Core Width [mm]: 188
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Packaging width [cm]: 16
- Packaging height [cm]: 26
- Packaging length [cm]: 38.5
- Net Weight [g]: 817
- Nimetus: MH CR1024000P
- Tootja: MAHLE
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 720
- Core Width [mm]: 468
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without cap,
without expansion tank -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
-
Nimetus: Radiaator,
mootorijahutus - Tootja: NIS
-
Lisainfo: AUDI A 8 /
S 8 (4H) (10- ) S8 - 4.0 TFSI
- Core Length [mm]: 720
- Core Width [mm]: 470
- Core Depth [mm]: 36
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
- Packaging length [cm]: 89.5
- Packaging width [cm]: 60.5
- Packaging height [cm]: 15.5
- Weight [kg]: 5.68
- Tootja: AKSDASIS
-
Mootorikood: CGTA,
CTFA - Plokieraldus:
- Material: Aluminium
- Core Length [mm]: 720
- Core Width [mm]: 471
- Core Depth [mm]: 32
- Radiator type: Brazed cooling fins
-
Nimetus: RADIAATOR,
MOOTORIJAHUTUS - Tootja: NRF
- Lisainfo: 720*474*36
- Mootorikood: CGTA
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 720
- Core Width [mm]: 471
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without cap,
without expansion tank -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Tootja: NISSENS
-
Lisainfo: AUDI A 8 /
S 8 (4H) (10- ) 4.2 FSI
Technical Information: Radiator with 5mm system-Advanced technology with higher power effect
- Core Length [mm]: 614
- Core Width [mm]: 428
- Core Depth [mm]: 16
- Inlet Ø [mm]: 16
- Outlet Ø [mm]: 16
- Weight [kg]: 2.9
- Packaging length [cm]: 85
- Packaging width [cm]: 62
- Packaging height [cm]: 12
-
Sõidukivarustus: sõidukitele koos/
ilma kliimaseade -
Käigukasti liik: Lülitus-
/ optsioon automaatkäigukast - Core Length [mm]: 720
- Core Width [mm]: 470
- Core Depth [mm]: 36
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Radiator type: Brazed cooling fins
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Weight [kg]: 7.1
- Packaging length [cm]: 100
- Packaging width [cm]: 63
- Packaging height [cm]: 19
- for OE number: 4H0121251E
- Netosügavus [mm]: 32
- Netopikkus [mm]: 720
- Netolaius [mm]: 470
- Radiaatori tüüp: Jahutusribid joodetud
- Materjal veekamber (radiaator): Plastik
-
Tehniline informatsioon: quick connection inlet/
outlet - Nimetus: Radiator
- Kvaliteediklass: PJ
Lisainfo: A8, 10- (kvaliteediklass PJ)
-
Kerenumber (VIN) alates: 4H-
A- 000 001 -
Kerenumber (VIN) kuni: 4H-
A- 010 000 - Core Length [mm]: 190
- Core Width [mm]: 235
- Core Depth [mm]: 26
- Heating/Cooling: for vehicles with auxiliary cooler
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Material: Plastic
- Fitting Position: Left Front
- Weight [kg]: 1.22
- Packaging length [cm]: 39
- Packaging width [cm]: 16
- Packaging height [cm]: 26
- Mootorikood: CTFA
- Radiator type: Brazed cooling fins
- Core Length [mm]: 720
- Core Width [mm]: 470
- Core Depth [mm]: 32
- Water Tank Material (radiator): Plastic
- Vehicle Equipment: for vehicles with air conditioning
- Packaging height [cm]: 18.5
- Packaging width [cm]: 56.5
-
Net Weight [g]: 5,
768 - Packaging length [cm]: 98
- Tootja: MAHLE
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Mootorikood: CGTA
- Radiator type: Brazed cooling fins
- Core Length [mm]: 720
- Core Width [mm]: 474
- Core Depth [mm]: 36
- Water Tank Material (radiator): Plastic
- Vehicle Equipment: for vehicles with air conditioning
- Packaging width [cm]: 19
-
Net Weight [g]: 6,
119 - Packaging height [cm]: 63
- Packaging length [cm]: 99.5
-
Nimetus: Radiaator,
mootorijahutus - Tootja: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Mootorikood: CGTA
-
Installatsiooni pool: kese,
ees - Küte/Jahutus: Lisaradiaator
- Radiator type: Brazed cooling fins
- Core Length [mm]: 614
- Core Width [mm]: 428
- Core Depth [mm]: 16
- Water Tank Material (radiator): Aluminium
- Manufacturer: produced by MAHLE
- Packaging width [cm]: 12
-
Net Weight [g]: 2,
195 - Packaging height [cm]: 62
- Packaging length [cm]: 84.5
-
Nimetus: Radiaator,
mootorijahutus - Tootja: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Installatsiooni pool: ees
- Küte/Jahutus: Lisaradiaator
- Mootorikood: CGTA
- Core Depth [mm]: 16
- Core Length [mm]: 615
- Core Width [mm]: 430
- Radiator type: Brazed cooling fins
- Mootorikood: CGTA
- Cooling fins material: Aluminium
- Core Depth [mm]: 36
- Core Length [mm]: 720
- Core Width [mm]: 470
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers
- Nimetus: Radiator
- Kvaliteediklass: Q
Lisainfo: "Tootja: OEM/OES (BEHR)
A8, 10-
(kvaliteediklass: Q)"
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog