• Cable Length [mm]: 180
• Tootja: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-FR-023
• Tootja: NTY

• Kerenumber (VIN) kuni: J14287
• Plokieraldus:
• Kerenumber (VIN) alates: J14288
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Number of pins: 2
• Fitting Depth [mm]: 56.5
• Cable Length [mm]: 180
• Spanner Size: 15
• Thread Size: M10x1.5
• for OE number: 1338F0
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Kerenumber (VIN) kuni: J14287
• Thread Size: M10x1.5
• Supplementary Article/Info 2: with cable
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: VER

• Sensor Type: Active sensor
• for OE number: 1132919
• Tootja: KAMOKA

• Ehitusaasta kuni: 10.2005
• Fitting Position: Front Axle, Rear Axle
• Cable Length [mm]: 60
• Sensor Type: Active sensor
• Tootja: KAMOKA

• Fitting Position: Rear Axle, Front Axle
• Sensor Type: Hall Sensor
• Number of pins: 2
• Tootja: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle
• for OE number: 1S7T2B372AD
• Number of pins: 2
• Number of mounting bores: 1
• Tootja: MAGNETI MARELLI
• Nimetus: MM MWSS039

• Sensor Type: Passive sensor
• for OE number: 6602998
• Tootja: KAMOKA

• Number of pins: 3
• Supplementary Article/Supplementary Info: with seal
• Connector Shape: rectangular
• Colour: grey
• Number of mounting bores: 1
• for OE number: 1811604
• Tootja: DELLO AUTOMEGA

• Pressure from [kPA]: 50
• Fabrication Number: ECM-FR-002

• Sensor Type: Active sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 25
• Tootja: AUTOFREN SEINSA
• Nimetus: SE DS0062

Installatsiooni pool: 1. Esisild vasakul, 1. Tagasild paremal, 1. Esisild paremal, 1. Tagasild vasakul

• Installatsiooni pool: esisild vasakul, esisild paremal
• Fitting Position: Front Axle, Rear Axle
• Tootja: DELLO AUTOMEGA

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fabrication Number: ECP-FR-003
• Tootja: NTY

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Component Number: 120-04-049
• Tootja: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Installatsiooni pool: Esisild
• Sensor Type: Active sensor
• Fitting Depth [mm]: 25.2
• Tootja: OPTIMAL ZAWIESZENIE

• Sensor Type: Passive sensor
• for OE number: 1920LV
• Tootja: KAMOKA

• Ehitusaasta kuni: 10.2005
• Fitting Position: Front Axle, Rear Axle
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: MAX

• vajaminev tükihulk: 2
• Installatsiooni pool: Tagasild, Esisild
• Supplementary Article/Info 2: without cable
• Tootja: BREMI

• Installatsiooni pool: esisild vasakul, esisild paremal
• Sensor Type: Active sensor
• Length [mm]: 43
• Socket colour: black

Tootja: MAGNETI MARELLI

• Number of pins: 2
• Fabrication Number: ESS-FR-001
• Tootja: NTY

• Warranty: 3 years warranty
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV829

• Mootorikood: R4-X404
• Fitting Position: Front and Rear
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Voltage [V]: 12
• Weight [kg]: 0.02
• Colour: black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Tootja: SKV GERMANY
• Nimetus: CE 06SKV005

• Ehitusaasta kuni: 10.2005
• Number of pins: 2
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Tootja: SKV GERMANY

• Sõidukivarustus: sõidukitele ilma CAN-Bus-System
• Height [mm]: 40.5
• Resistor [Ohm]: 400
• Number of connectors: 2
• Tootja: VERNET

• Number of pins: 4
• Tootja: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Ehitusaasta kuni: 10.2005
• Fitting Position: Front Axle
• Warranty: 5 years warranty
• Tootja: HUCO

• Installatsiooni pool: taga
• Kerenumber (VIN) kuni: J39905
• Fitting Position: Front
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: straight
• Chemical Properties: Paintable
• Nimetus: Parking sensor
• Kvaliteediklass: PJ

Lisainfo: (kvaliteediklass PJ)

• Fitting Position: Rear
• Number of pins: 3
• Tootja: ZZVF

• Number of pins: 3
• Connector Shape: oval
• Socket colour: grey
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 26.5
• Number of mounting bores: 1
• for OE number: 6C11-12K073-AC, 1920.KX, JDE3763, LR004492
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MD

• Mootorikood: FMBA
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Nimetus: ANDUR, VŽNTVOLL
• Tootja: MAX

Tootja: FAST

• Installatsiooni pool: Esisild, Tagasild
• Plokieraldus:
• Hulk: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Tootja: DELPHI
• Nimetus: DE SS20144

• Fitting Position: Front Axle Left, Front Axle Right
• Number of pins: 2
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• vajaminev tükihulk: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: grey
• Tootja: BREMI

• Spanner Size: 15 mm
• Cable Length [mm]: 180
• Sensor Type: NTC Sensor
• Number of pins: 2
• Height [mm]: 56
• Connecting thread: M10 x 1,5
• Tootja: ERA

• Mootorikood: FMBA
• Nimetus: ANDUR, VŽNTVOLL
• Tootja: EPS

• Mootorikood: R4-X404
• Number of connectors: 3
• Supplementary Article/Info 2: for camshaft
• Weight [kg]: 0.018
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Rear
• Number of pins: 3

• Supplementary Article/Info 2: without cable
• Fitting Position: Rear Axle, Front Axle
• Sensor Type: Hall Sensor
• Number of pins: 2
• Tootja: FAE

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Sensor Type: Piezoelectric Sensor
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PG013114321

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Fitting Depth [mm]: 25.2
• Number of pins: 2
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: TRI

• Number of pins: 2
• Connector Shape: rectangular
• Housing Colour: white
• Tootja: FAE

• Number of pins: 2
• Nimetus: ANDUR, VŽNTVOLL
• Tootja: DLP
• Kvaliteediklass: PJ

Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Mootorikood: FMBA
• Kerenumber (VIN) kuni: J14287
• Plokieraldus:
• Kerenumber (VIN) alates: J14288
• Thread Size: M10x1,5
• Spanner Size: 15
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Height [mm]: 26.5
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Tootja: VERNET

Tootja: MAGNETI MARELLI

• Kerenumber (VIN) kuni: E43463
• vajaminev tükihulk: 1
• Tootja: BREMI

• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PU012039951
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: FMBA
• Kerenumber (VIN) kuni: E43463
• Number of pins: 4
• Nimetus: ANDUR,OHUVOTU ROHK
• Tootja: MAX

• Length [mm]: 38
• Thread Size: M6
• Colour: black
• Number of pins: 2
• Weight [kg]: 0.022
• Resistor [Ohm]: 400
• Tootja: ERA

• Voltage [V]: 12
• Corresponds to the original part in colour: Smoke Grey
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Nimetus: ANDUR,NUKKVOLLIPOSITSIOON
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Ehitusaasta alates: 09.2003
• Mootorikood: X404
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 400
• Weight [kg]: 0.04
• Nimetus: ANDUR, VŽNTVOLL
• Tootja: VAL

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Connector Shape: oval
• Connecting thread: M6x1
• Alternative Repair Kit: 550643
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 38.5
• Tootja: ERA

• Mootorikood: FMBA
• Number of connectors: 2
• Weight [kg]: 0.01
• Tootja: FEBI BILSTEIN

Fitting Position: Rear Axle Left, Front Axle Left, Front Axle Right, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Sensor Type: Active sensor
• Length [mm]: 54
• Supplementary Article/Info 2: without cable
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Esisild
• Quality: IAM
• Tootja: METZGER

• Ehitusaasta alates: 09.2003
• Mootorikood: X404
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.02
• Nimetus: ANDUR,NUKKVOLLIPOSITSIOON
• Tootja: VAL

• Ehitusaasta kuni: 10.2005
• Installatsiooni pool: Esisild, Tagasild
• Plokieraldus:
• Overall Length [mm]: 55
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: BOS

• Mootorikood: FMBA
• Number of connectors: 2
• Weight [kg]: 0.042
• Tootja: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Housing Colour: white
• Thread Size: 10x1.5
• Tootja: FAE

• Number of pins: 3
• Sensor Type: Hall Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Tootja: HUCO

• Fitting Position: Rear
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Tootja: ERA

• Mootorikood: FMBA
• Number of connectors: 2
• Weight [kg]: 0.042
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 4
• Pressure from [kPA]: 50
• Nimetus: ANDUR,OHUVOTU ROHK
• Tootja: DLP

• Mootorikood: FMBA
• Number of connectors: 2
• Weight [kg]: 0.044
• for OE number: 1 132 002
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: FMBA
• Nimetus: DETONATSIOONIANDUR
• Tootja: EPS

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 38
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Connector Shape: oval
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta kuni: 10.2005
• Tootja: BOSCH

• Housing Colour: black
• Number of pins: 2
• Tootja: FAE

• Ehitusaasta kuni: 10.2005
• Tootja: BOSCH

• Sensor Type: Piezoelectric Sensor
• Number of pins: 2
• Nimetus: Detonatsiooniandur
• Tootja: MEY

• Mootorikood: FMBA
• Number of connectors: 2
• Weight [kg]: 0.044
• for OE number: 1 132 002
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Number of pins: 4

• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Weight [kg]: 0.071
• Fitting Position: Rear Axle
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Housing Colour: grey
• Supplementary Article/Info 2: without cable
• Tootja: FAE

• Mudeliaasta alates: 2007
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: silver
• Installation Information: TPMS sensor needs to be programmed before use.
• Nimetus: Rattaandur, rehvirohu kontrollssteem
• Tootja: HUF
• Lisainfo: UVS4050

• Mudeliaasta alates: 2007
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: black
• Installation Information: TPMS sensor needs to be programmed before use.
• Nimetus: Rattaandur, rehvirohu kontrollssteem
• Tootja: HUF

• Mudeliaasta alates: 2007
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Housing Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Nimetus: RATTAANDUR, REHVIROHU KONTROLLSšSTEEM
• Tootja: HUF
• Lisainfo: UVS4040

General Information: also available with black metal valve UVS4042 or with titani um metal valve UVS4043

• Number of pins: 2
• Tootja: ERA

• Mootorikood: FMBA
• Kerenumber (VIN) kuni: E43463
• Pressure from [kPA]: 36
• Pressure to [kPA]: 261
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Nimetus: ANDUR,OHUVOTU ROHK
• Tootja: EPS

• Installatsiooni pool: ees
• Kerenumber (VIN) alates: J39906
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Housing Colour: black
• Connector Shape: right-angled
• Tootja: METZGER

• Mootorikood: FMBA
• Kerenumber (VIN) kuni: E43463
• Number of connectors: 4
• Weight [kg]: 0.022
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 4
• Pressure from [kPA]: 50
• Pressure to [kPA]: 250
• Colour: black
• Tootja: FAE

• Kerenumber (VIN) kuni: E43463
• Pressure [Pa] from: 36,000
• Pressure [Pa] to: 261,000
• Voltage [V]: 12
• Resistor [Ohm]: 30,000
• Number of pins: 4
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Nimetus: HE 6PP009400381
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Colour: black
• Number of pins: 4
• Weight [kg]: 0.024
• Tootja: ERA

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with attachment material
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 104
• Rim Hole Number: 5
• Fastening Type: Four-point attachment
• Bearing Type: Ball Bearing
• Nimetus: RATTARUMM
• Tootja: MEY

Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.