• for OE number: 000 905 06 00
• Width [mm]: 33
• Height [mm]: 30
• Length [mm]: 58
• Weight [g]: 20
• Guarantee: 3 years guarantee
• Number of pins: 2
• Tootja: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Mootorikood: M 273.970
• tootekoodile: 7.8776, 7.8875
• Tootja: FACET

• Mootorikood: M 273.970
• tootekoodile: 1.880.776, 1.880.875
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• for OE number: 005 153 50 28, 2E0 906 051 A
• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 127
• Fabrication Number: ECM-ME-000
• Tootja: NTY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-ME-000
• Tootja: NTY

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Colour: black
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY

• Fabrication Number: ECP-ME-006
• Number of pins: 3
• Tootja: NTY

• Fabrication Number: ECP-ME-003
• Tootja: NTY

• OE-numbri jaoks: 05080346AA
• Anduritüüp: Aktiivne andur
• Tootja: KAMOKA

• Ehitusaasta kuni: 08.2011
• Pistikkontaktide arv: 3
• Nimetus: ANDUR,KOMPRESSORIROHK
• Tootja: MAX

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Piirangutega toode/piirangu info 2: ilma kaablita
• OE-numbri jaoks: 594621
• Tootja: MEAT&DORIA

• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 18.3
• Weight [kg]: 0.046
• Tootja: ERA

• Pistikkontaktide arv: 3
• Surve alates [kPA]: 10
• Surve kuni [kPA]: 127
• Kvaliteet: OE EQUIVALENT
• OE-numbri jaoks: 2E0906051A
• Tootja: MEAT&DORIA

• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550777
• Tootja: ERA

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Piirangutega toode/piirangu info 2: ilma kaablita
• OE-numbri jaoks: 594623
• Tootja: MEAT&DORIA

• Nimetus: ANDUR,KOMPRESSORIROHK
• Tootja: MAG

• vajaminev tükihulk: 4
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Tootja: BRM

Nimetus: CZUJNIK POO½ENIA WAKA ROZRZ. PORSCHE 911, 911 TARGA, BOXSTER, BOXSTER SPYDER, CAYENNE, CAYMAN 2.7-4.8 07.04-

Tootja: MAGNETI MARELLI

• Ehitusaasta kuni: 08.2011
• Nimetus: DETONATSIOONIANDUR
• Tootja: BOS

• Mootorikood: M 273.970
• vajaminev tükihulk: 4
• Pikkus (mm): 24
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MAX

• Pistikkontaktide arv: 2
• Tootja: DELPHI

• Pistikkontaktide arv: 3
• Nimetus: Andur,ohuvotu rohk
• Tootja: MEY

Piirangutega toode/piirangu info 2: koos rõngastihendiga, ilma integreeritud õhutemperatuuri sensorita

• Mootorikood: M 273.970
• vajaminev tükihulk: 2
• Tootja: FACET

• Pistikkontaktide arv: 3
• Surve alates [kPA]: 10
• Nimetus: DE PS10140
• Tootja: DELPHI

• Alternatively:
• Number of pins: 3
• Connector Shape: oval
• Pressure from [kPA]: 10
• Pressure to [kPA]: 265
• Weight [kg]: 0.016
• Alternative Repair Kit: 550142
• Tootja: ERA

• Mootorikood: M 273.970
• vajaminev tükihulk: 2
• Nimetus: DETONATSIOONIANDUR
• Tootja: EPS

• Ehitusaasta kuni: 08.2011
• OE-numbri jaoks: 5946,23
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Alternatively:
• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 127
• Weight [kg]: 0.016
• Alternative Repair Kit: 550143
• Tootja: ERA

• Installatsiooni pool: Sisselaskepool, Väljalaskepool
• vajaminev tükihulk: 4
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 3
• Nimetus: ANDUR,NUKKVOLLIPOSITSIOON
• Tootja: MEY

• Pikkus (mm): 202
• Ühenduste arv: 2
• Kaal (kg): 0,019
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Käigukasti liik: Käigukast
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550328
• Tootja: ERA

Käigukasti ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603

Tootja: FAST

• vajaminev tükihulk: 2
• Pinge [V]: 12
• Pistikkontaktide arv: 2
• Väändejõud [Nm]: 20
• Piirangutega toode/piirangu info 2: ilma kaablita
• Vastab originaalosa värvile: must
• Pistikute teostus: Lamepistik
• Pistikukatte kuju: ristkülik
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: HE 6PG013114361
• Tootja: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita, koos rõngastihendiga
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Lambda andur: Sond
• Ülekandeliinide arv: 4
• Tootja: KAMOKA

• Ehitusaasta kuni: 08.2011
• Nimetus: ANDUR,KOMPRESSORIROHK
• Tootja: BOS

• Mootorikood: M 273.970
• vajaminev tükihulk: 4
• Tootja: FACET

• Hulk: 4
• valikuliselt:
• Pistikkontaktide arv: 3
• Tootja: DELPHI
• Nimetus: DE SS11033

• Hulk: 4
• Kõrgus (mm): 24,2
• Anduritüüp: Hallsensor
• Ühenduste arv: 3
• Tootja: VERNET

• Mootorikood: M 273.970
• vajaminev tükihulk: 4
• Nimetus: EP 1.953.387
• Tootja: EPS

• Pikkus (mm): 35
• Laius (mm): 48,5
• Jämedus/Tugevus (mm): 43
• Ühenduste arv: 3
• Kaal (kg): 0,015
• OE-numbri jaoks: 005 153 50 28
• Nimetus: ANDUR,OHUVOTU ROHK
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Käigukasti liik: Käigukast
• Pikkus (mm): 24
• Ühenduste arv: 3
• Kaal (kg): 0,029
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: ANDUR,NUKKVOLLIPOSITSIOON
• Tootja: FEB

Käigukasti ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603 Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: M 273.970
• vajaminev tükihulk: 1
• Surve alates [kPA]: 10
• Surve kuni [kPA]: 127
• Väljundpinge alates [V]: 0,503
• Väljundpinge kuni [V]: 4,75
• Tootja: FACET

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Tootja: ERA

• vajaminev tükihulk: 4
• Pinge [V]: 12
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Kinnitusaukude hulk: 1
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; plii Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: M 273.970
• vajaminev tükihulk: 1
• Surve alates [kPA]: 10
• Surve kuni [kPA]: 127
• Väljundpinge alates [V]: 0,503
• Väljundpinge kuni [V]: 4,75
• Nimetus: EP 1.993.106
• Tootja: EPS

• Ehitusaasta kuni: 08.2011
• Garantii: 5 aastat garantii
• Tootja: HUCO

• Pistikkontaktide arv: 3
• Nimetus: ANDUR,NUKKVOLLIPOSITSIOON
• Tootja: DLP

• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pistikkontaktide arv: 3
• Surve alates [kPA]: 50
• Surve kuni [kPA]: 1 100
• Tootja: FAE ELEKTRYKA

• OE-numbri jaoks: 004 153 3028
• Tootja: TRUCKTEC AUTOMOTIVE

• vajaminev tükihulk: 4
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24,2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga, ilma kaablita
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii, 872-50-4; 1-Methyl-2-pyrrolidone
• Tootja: HELLA
• Nimetus: HE 6PU009168001

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

Tootja: NRF

• Ehitusaasta kuni: 08.2011
• Nimetus: ANDUR,NUKKVOLLIPOSITSIOON
• Tootja: BOS

• Fuel Type: Petrol
• Used part return not required:
• Fabrication Number: EPP-ME-013
• Tootja: NTY

• Ehitusaasta kuni: 08.2011
• Lambda andur: Diagnoosisond, Sõrmesensor
• Installatsiooni pool: pärast katalüsaatorit
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Käigukasti liik: Käigukast
• Nimetus: LAMBDA ANDUR
• Tootja: MAX

• Pikkus (mm): 50
• Laius (mm): 27
• Jämedus/Tugevus (mm): 52
• Siseläbimõõt [mm]: 6,7
• Välisläbimõõt [mm]: 21
• Ühenduste arv: 3
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta kuni: 08.2011
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.31
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 07SKV160

• Takistus [oom]: 9
• Pikkus (mm): 320
• Ühendushulk: 4
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 320
• Lambda andur: soojendatud
• Nimetus: LAMBDA ANDUR
• Tootja: MAG

• Pikkus (mm): 50
• Laius (mm): 27
• Jämedus/Tugevus (mm): 52
• Siseläbimõõt [mm]: 6,7
• Välisläbimõõt [mm]: 21
• Ühenduste arv: 3
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info: koos tihendiga
• Nimetus: SW 10 93 8292
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Garantii: 5 aastat garantii
• Üldine informatsioon: Sold in Hueco brand: printing and packaging
• Tootja: HUCO

• Ehitusaasta kuni: 08.2011
• vajaminev tükihulk: 2
• Number of pins: 2
• Corresponds to the original part in colour: black, white
• Tootja: METZGER

• OE-numbri jaoks: 273 094 05 48
• Tootja: KAMOKA

• Ühendushulk: 4
• Pikkus (mm): 500
• Ülekandeliinide arv: 4
• Takistus [oom]: 9
• Kaablipikkus (mm): 500
• Lambda andur: soojendatud
• Tootja: MAGNETI MARELLI

• Lambda andur: Sond, Diagnoosisond
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 380
• OE-numbri jaoks: 0045420818
• Tootja: MEAT&DORIA

• Fabrication Number: ESL-CH-032
• Tootja: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Installatsiooni pool: vasakul, pärast katalüsaatorit, paremal
• Lambda andur: Diagnoosisond, soojendatud
• Plokieraldus:
• Väliskeerme mõõde: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 503
• Kaal (kg): 0,09
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: M 273.970
• Pinge [V]: 12
• Nimetus: Ohumassimootja
• Tootja: MAX

• Lambda andur: Diagnoosisond
• Installatsiooni pool: ees vasakul, ees paremal
• Hulk: 2
• Pikkus (mm): 500
• Ühenduste arv: 4
• Tootja: VERNET

• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 490
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 09SKV700

• Number of pins: 3
• Connector Shape: angled
• Fitting Position: in fuel tank
• Fuel Type: Petrol
• Version: IAM
• Tootja: METZGER

• Mootorikood: M 273.970
• vajaminev tükihulk: 2
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Piirangutega toode/piirangu info 2: ilma pistikuta
• Pistikkontaktide arv: 4
• OE-numbri jaoks: V99760001
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Pikkus (mm): 350
• Installatsiooni pool: pärast katalüsaatorit
• Tootja: VEMO GERMANY

Lambda andur: Diagnoosisond, Sõrmesensor, soojendatud, Keere eelmääritud Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: pärast katalüsaatorit, Pank 1, Pank 2
• Lambda andur: Titaanandur
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 500
• Pistikkontaktide arv: 4
• Nimetus: Lambda andur
• Tootja: MEY