• Length [mm]: 102
• Lisainfo: Sensor, brake lining wear, front

• Installatsiooni pool: Tagasild
• Brake System: ATE
• Tootja: JP GROUP

Lisainfo: Sensor, brake lining wear, front

• Sõidukivarustus: sportpaketita sõidukitele
• Fitting Position: Front Axle
• Brake System: TRW

• Sõidukivarustus: sportpaketiga sõidukite jaoks
• Fitting Position: Front Axle
• Brake System: TRW
• Tootja: JP GROUP

• Installatsiooni pool: Tagasild
• Brake System: ATE
• Tootja: JP GROUP

• Kogus pakendis: 10
• Installatsiooni pool: esisild mõlemapoolselt, Tagasild mõlemapoolselt
• Kruvipea-/Mutriprofiil: sise-Torx
• Pikkus (mm): 12
• Keermemõõt: M8 x 1
• Võtmekaugus: Innen-Torx
• Väliskeere [mm]: M 8 x 1
• Kvaliteet/klass: 8,8
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: Esisild, Tagasild
• Plokieraldus:
• Length [mm]: 12
• External Thread Size: M8 x 1
• Spanner Size: T30
• Bolt Head-/Nut Design: Female Torx
• Surface: Zink flake coated
• Weight [kg]: 0.004
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• vajaminev tükihulk: 1
• Piduriliik: Ketaspidur
• Pikkus (mm): 98
• Tootja: DENCKERMANN ZAWIESZENIE

• Brake Type: Disc Brake
• Fitting Position: Front Axle, Rear Axle
• for OE number: 1695401617
• Tootja: KAMOKA
• Lisainfo: 105021 KAMOKA

• Mootorikood: OM 651.924
• Installatsiooni pool: Tagasild, Esisild
• Plokieraldus:
• Piduriliik: Ketaspidur
• Pikkus (mm): 94
• Tootja: JPN

• Installatsiooni pool: Esisild, Tagasild
• Plokieraldus:
• Length [mm]: 95
• Wear Warning Contact: Change warning contact together with the pads
• Brake Type: Disc Brake
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Esisild
• Piduriliik: Ketaspidur
• Pikkus (mm): 95
• Kaal (kg): 0,03
• Kulumisnäidikute arv [ühe telje kohta]: 1
• Tootja: ABS

• Piduriliik: Ketaspidur
• Installatsiooni pool: Esisild, Tagasild
• Pikkus (mm): 95
• Tootja: 3RG

• Installatsiooni pool: Esisild
• Piduriliik: Ketaspidur
• Pidurisüsteem: TRW
• Pikkus (mm): 97
• Piirangutega toode/piirangu info: Sillakomplekt
• Tootja: QUICK BRAKE

• Mootorikood: OM 651.924
• Installatsiooni pool: Tagasild, Esisild
• Plokieraldus:
• Length [mm]: 94
• Brake Type: Disc Brake
• Weight [kg]: 0.004
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: OM 651.924
• Installatsiooni pool: Tagasild, Esisild
• Plokieraldus:
• Length [mm]: 94
• Brake Type: Disc Brake
• Weight [kg]: 0.004
• Nimetus: SW 10 91 9186
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild, Tagasild
• Piduriliik: Ketaspidur
• Garantii: 3 aastat garantii
• Kaal (kg): 0,02
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Nimetus: CE 17SKV560
• Tootja: ESEN SKV

• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE
• Kaal (kg): 0,02
• Tootja: ABS

• Installatsiooni pool: Esisild
• Šassii: sportvedrustusega sõidukile
• Poldipikkus (mm): 65
• Kaal (kg): 0,12
• Tootja: ABS

• Installatsiooni pool: Esisild, Tagasild
• Brake Type: Disc Brake
• Length [mm]: 95
• Number of wear indicators [per axle]: 1
• Tootja: BREMBO
• Nimetus: BR A 00 377

• Installatsiooni pool: Tagasild, Esisild
• Plokieraldus:
• Piduriliik: Ketaspidur
• Kaal (kg): 1,05
• Hoiatuskontakti pikkus (mm): 100
• Tootja: TOMEX C

• Ehitusaasta kuni: 08.2014
• Installatsiooni pool: Tagasild
• valikuliselt:
• Length [mm]: 97
• Brake Type: Disc Brake
• Tootja: BOSCH
• Nimetus: BS 1987474966

• Installatsiooni pool: Esisild
• Sõidukivarustus: sportpaketita sõidukitele
• Brake System: LUCAS
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-2903A

• Ehitusaasta kuni: 08.2016
• Installatsiooni pool: Esisild, Tagasild
• Plokieraldus:
• Length [mm]: 95
• Brake Type: Disc Brake
• Tootja: BOSCH
• Nimetus: BS 1987473070

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Length 1 [mm]: 100
• Brake Type: Disc Brake
• Nimetus: DE LZ0153
• Tootja: DELPHI

Lisainfo: "Tootja: DELPHI
KLASA C T-MODEL (S20
(kvaliteediklass: PJ)"

• Installatsiooni pool: Esisild
• Pidurisüsteem: TRW
• Sõidukivarustus: sportpaketita sõidukitele
• Tootja: QUICK BRAKE
• Nimetus: QB 109-1716

• Fitting Position: Rear Axle
• Brake System: ATE
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-2688A

• Installatsiooni pool: Esisild
• Sõidukivarustus: sportpaketita sõidukitele
• Pidurisüsteem: LUCAS/TRW
• Kaal (kg): 0,04
• Tootja: ABS

• vajaminev tükihulk: 1
• Installatsiooni pool: Tagasild
• Piduriliik: Ketaspidur
• Pikkus (mm): 97,5
• Tootja: ATE

• Versioon: without sports pack
• Fitting Position: Front Axle, Rear Axle
• Brake System: TRW
• Nimetus: FR 901649
• Tootja: FRENKIT

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Brake Type: Disc Brake
• Length [mm]: 100
• Number of wear indicators [per axle]: 2
• Tootja: LUCAS

SVHC: No information available, please contact the manufacturer!

• Versioon: with sports package
• Fitting Position: Front Axle
• Brake System: TRW
• Tootja: FRENKIT
• Nimetus: FR 901845

• Installatsiooni pool: Esisild
• Pidurisüsteem: TRW
• Tootja: PROFIPOWER

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Brake Type: Disc Brake
• Length [mm]: 102
• Length 2 [mm]: 110
• Tootja: LUCAS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake System: ATE (Teves)
• Nimetus: FR 901843
• Tootja: FRENKIT

• Installatsiooni pool: Esisild
• Brake System: LUCAS
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-2491A

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Brake Type: Disc Brake
• Length [mm]: 95
• Tootja: LUCAS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake System: Ate
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-2884A

• Ehitusaasta kuni: 08.2014
• Installatsiooni pool: Esisild
• Length [mm]: 120
• Brake Type: Disc Brake
• Tootja: BOSCH

• Installatsiooni pool: Esisild
• Pidurisüsteem: Lucas
• Kaal (kg): 0,05
• Tootja: TOMEX C

• Installatsiooni pool: Esisild
• Pidurisüsteem: TRW
• Length 1 [mm]: 97
• Brake Type: Disc Brake
• Nimetus: DE LZ0363
• Tootja: DELPHI

• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE
• Tootja: QUICK BRAKE

• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE
• Kaal (kg): 0,09
• Tootja: ABS

• Installatsiooni pool: Esisild
• Pidurisüsteem: TRW
• Sõidukivarustus: sportpaketiga sõidukite jaoks
• Tootja: QUICK BRAKE

• Installatsiooni pool: Esisild
• Sõidukivarustus: sportpaketita sõidukitele
• Manufacturer Restriction: TRW
• Tootja: LUCAS

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Esisild
• Pidurisüsteem: TRW
• Sõidukivarustus: sportpaketita sõidukitele
• Kogus pakendis: 4
• Nimetus: DE LX0475
• Tootja: DELPHI

• Installatsiooni pool: esisild vasakul
• Seerianumber: HCA-ME-046
• Anduritüüp: Aktiivne andur
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos kaabliga
• paaris tootenumbrid: HCA-ME-047

• Installatsiooni pool: esisild paremal
• Seerianumber: HCA-ME-047

• Length [mm]: 730
• Fitting Position: Front Axle Right
• Tootja: KAMOKA

• Length [mm]: 730
• Fitting Position: Front Axle Left
• Tootja: KAMOKA

• Ehitusaasta kuni: 08.2014
• Installatsiooni pool: esisild vasakul
• Pistikkontaktide arv: 2
• Anduritüüp: Aktiivne andur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Mootorikood: OM 651.924
• Ehitusaasta kuni: 08.2014
• Installatsiooni pool: esisild vasakul
• Mudeliaasta kuni: 2012
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 725
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Tootja: BOSCH

• Installatsiooni pool: Tagasild
• Seerianumber: HCA-ME-039

• Mootorikood: OM 651.924
• Ehitusaasta kuni: 08.2014
• Installatsiooni pool: esisild paremal
• Mudeliaasta kuni: 2012
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 725
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Tootja: BOSCH
• Lisainfo: 0265008133 BOSCH

• Installatsiooni pool: esisild vasakul
• Värv: must
• Välisläbimõõt [mm]: 335
• Siseläbimõõt [mm]: 58
• paaris tootenumbrid: 131-07-186
• pidurikettaläbimõõdule (mm): 322
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: esisild paremal
• Värv: must
• Välisläbimõõt [mm]: 335
• Siseläbimõõt [mm]: 58
• paaris tootenumbrid: 131-07-185
• pidurikettaläbimõõdule (mm): 322
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: esisild paremal
• Materjal: Raudplekk
• Pealispind: tsingitud
• Seerianumber: HTO-ME-010
• paaris tootenumbrid: HTO-ME-009

• Installatsiooni pool: esisild vasakul
• Materjal: Raudplekk
• Pealispind: tsingitud
• Seerianumber: HTO-ME-009
• paaris tootenumbrid: HTO-ME-010

• Fitting Position: Front Axle Right
• Sensor Type: Active sensor
• Length [mm]: 680
• Socket colour: black

• Fitting Position: Front Axle Left
• Sensor Type: Active sensor
• Length [mm]: 680
• Socket colour: black

• Fitting Position: Front Axle Left
• for OE number: 2124201144
• Material: Aluminium
• for brake disc diameter [mm]: 322
• Diameter 1 [mm]: 335
• Tootja: KAMOKA

• Fitting Position: Front Axle Right
• for OE number: 2124201244
• Material: Aluminium
• for brake disc diameter [mm]: 322
• Diameter 1 [mm]: 335
• Tootja: KAMOKA

• Installatsiooni pool: Tagasild paremal
• Värv: must
• Välisläbimõõt [mm]: 360
• Siseläbimõõt [mm]: 130
• Materjal: Raudplekk
• paaris tootenumbrid: 131-07-665
• soovitava lisavarustuse artiklinumber: 231-04-052
• Pealispind: KTL-kattega (katoodne sukelduskatmine)
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Length [mm]: 724
• Fitting Position: Rear Axle Left, Rear Axle Right
• Tootja: KAMOKA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 720
• Socket colour: black
• Tootja: JP GROUP

• Installatsiooni pool: Tagasild paremal
• Seerianumber: HTO-ME-026
• paaris tootenumbrid: HTO-ME-025

• Installatsiooni pool: Tagasild vasakul
• Seerianumber: HTO-ME-025
• paaris tootenumbrid: HTO-ME-026

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Tootja: KAMOKA

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• Tootja: KAMOKA

• Installatsiooni pool: Tagasild
• Kaablipikkus (mm): 725
• Pistikkontaktide arv: 2
• Anduritüüp: Aktiivne andur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ehitusaasta kuni: 08.2016
• Installatsiooni pool: Esisild
• Pidurisüsteem: TRW
• Sõidukivarustus: sportpaketita sõidukitele
• Tootja: BOSCH

• Fitting Position: Front Axle Right
• Outer Diameter [mm]: 335
• Inner Diameter [mm]: 58
• for brake disc diameter [mm]: 322
• Tootja: JP GROUP
• Lisainfo: Splash Panel, brake disc

• Fitting Position: Front Axle Left
• Outer Diameter [mm]: 335
• Inner Diameter [mm]: 58
• for brake disc diameter [mm]: 322
• Tootja: JP GROUP
• Lisainfo: Splash Panel, brake disc

• Installatsiooni pool: Tagasild, paremal
• Materjal: Raudplekk
• Nimetus: CFD 612326
• Tootja: DACO

• Installatsiooni pool: Tagasild, vasakul
• Materjal: Raudplekk
• Nimetus: CFD 612325
• Tootja: DACO

• Installatsiooni pool: vasakul, Esisild
• pidurikettaläbimõõdule (mm): 322
• Nimetus: CFD 612323
• Tootja: DACO

• Installatsiooni pool: paremal, Esisild
• pidurikettaläbimõõdule (mm): 322
• Nimetus: CFD 612324
• Tootja: DACO

• Ehitusaasta kuni: 08.2016
• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE
• Tootja: BOSCH

• vajaminev tükihulk: 2
• erivarustuse koodile: 804, 805, 806, 807, 808
• Fitting Position: Rear Axle
• Cable Length [mm]: 680
• Sensor Type: Hall Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PU358218091

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Installatsiooni pool: Tagasild vasakul
• Värv: must
• Välisläbimõõt [mm]: 360
• Siseläbimõõt [mm]: 130
• Materjal: Raudplekk
• paaris tootenumbrid: 131-07-666
• soovitava lisavarustuse artiklinumber: 231-04-052
• Pealispind: KTL-kattega (katoodne sukelduskatmine)
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.