• for OE number: K05175764AA
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Fitted Diameter [mm]: 9
• Tootja: KAMOKA

• for OE number: K05103534AA
• Spanner Size: 19
• Tootja: KAMOKA

• Supplementary Article/Info 2: with seal ring
• for OE number: 000 905 61 02
• Number of pins: 2
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: MAX

• Number of pins: 2
• Nimetus: ANDUR,SISENDOHU TEMPERATUUR
• Tootja: MAX
• Lisainfo: 21-0292

Tootja: FAST

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5175764AA
• Supplementary Article/Info 2: with seal ring
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

Tootja: FAST

• Seerianumber: ECT-ME-004
• Tootja: NTY
• Nimetus: NTY ECT-ME-004

• Sensor Type: NTC Sensor
• Number of pins: 2
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M14x1.5
• for OE number: 0005426218
• Supplementary Article/Info 2: with seal ring
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Mootorikood: OM 651.924
• Nimetus: ANDUR,SISENDOHU TEMPERATUUR
• Tootja: EPS
• Lisainfo: 1-994-014

• Mootorikood: OM 651.924
• Tootja: FACET

• for OE number: 51271207038
• Sensor Type: Passive sensor
• Tootja: KAMOKA

• Thread Size: 9 mm
• Number of connectors: 2
• Tootja: VERNET

• Installatsiooni pool: Imitoru
• Connector Shape: oval
• Number of pins: 2
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: 15 mm
• Tootja: VERNET

• OE-numbri jaoks: 003 153 28 28
• Seerianumber: ECP-CH-020
• Tootja: NTY

• Garantii: 3 aastat garantii
• Kaal (kg): 0,01
• Pins'ide arv: 2
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY

Tootja: FAST

• Seerianumber: ECP-ME-001
• Tootja: NTY

• Sensor Type: NTC Sensor
• Supplementary Article/Supplementary Info: with retaining spring
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 2
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: MEY

• Mootorikood: OM 651.924
• tootekoodile: 1.880.776, 1.880.875
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Width [mm]: 30
• Thickness [mm]: 50
• Outer Diameter [mm]: 18, 9
• Number of connectors: 2
• Weight [kg]: 0.01
• for OE number: 000 905 61 02
• Supplementary Article/Info 2: with seal ring
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: OM 651.924
• for article number: 7.8776, 7.8875
• Tootja: FACET

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Sensor Type: NTC Sensor
• Length [mm]: 52
• for OE number: 6511530028
• Tootja: MEAT&DORIA

• for OE number: 05080352AA
• Sensor Type: Passive sensor
• Tootja: KAMOKA

• Width [mm]: 30
• Thickness [mm]: 50
• Outer Diameter [mm]: 18, 9
• Number of connectors: 2
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• for OE number: 000 905 61 02
• Nimetus: SW 10 94 5443
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta alates: 08.2014
• Pinge [V]: 12
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Mounting Type: Clamped
• Tootja: HELLA
• Nimetus: HE 6PT358058191

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Thickness [mm]: 52
• Outer Diameter [mm]: 10
• Number of connectors: 2
• Weight [kg]: 0.005
• Nimetus: ANDUR,SISENDOHU TEMPERATUUR
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: OM 651.924
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Nimetus: Andur,sisendohu temperatuur
• Tootja: MEY

• Mootorikood: OM 651.924
• Sensor Type: NTC Sensor
• Housing Colour: black
• Tootja: FAE

• Mootorikood: OM 651.924
• Keermemõõt: M14x1,5
• Võtmekaugus: 19
• Nimetus: ANDUR, KšTUSETEMPERATUUR
• Tootja: EPS

• Mootorikood: OM 651.924
• Thread Size: M14x1,5
• Spanner Size: 19
• Tootja: FACET

• Anduritüüp: NTC-andur
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Tootja: ERA

• Plokieraldus:
• Riikide valik: USA, Kanada
• Sõidukivarustus: Start-Stopp-funktsiooniga sõidukile
• Number of pins: 2
• Operating Mode: Mechanical
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6DD010966431

Käigukasti liik: mitte 7-käigulise autom.kasti jaoks, mitte 9-käigulise autom.kasti jaoks, mitte 5-käigulise autom.kasti jaoks

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Sensor Type: NTC Sensor
• Tootja: FAE

• Ehitusaasta kuni: 08.2014
• Sõidukivarustus: start-stopp-funktsioonita sõidukitele
• Sensor Type: Passive sensor
• Supplementary Article/Info 2: without cable
• Voltage [V]: 12
• Nimetus: ANDUR, VŽNTVOLL
• Tootja: MAX

• Number of pins: 2
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• Nimetus: ANDUR,SISENDOHU TEMPERATUUR
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Seerianumber: ECP-ME-006
• Pistikkontaktide arv: 3
• Tootja: NTY

• Connector Shape: D Shape
• Number of pins: 2
• for OE number: 003 153 27 28
• Supplementary Article/Info 2: without cable
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Housing Colour: black
• Transmission Type: Manual Transmission
• Number of pins: 2
• Actuation Type: Push Actuation
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Käigukasti liik: Käigukast 6 käiku, Automaatkäigukast
• Sõidukivarustus: start-stopp-funktsioonita sõidukitele
• ei ole erivarustuse koodile: B03
• vajaminev tükihulk: 1
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Tootja: BRM

Nimetus: CZUJNIK POO½ENIA WAU KORB. DB A KLASA W168 1,4 97-

• vajaminev tükihulk: 1
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Värv: must
• Anduritüüp: passiivne andur, Induktiivandur
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: D-kuju
• vajaminev tükihulk: 1
• Montaaživiis: kruvitud
• Tootja: FAST

• for OE number: 003 153 8628
• Tootja: TRUCKTEC

• Mootorikood: OM 651.924
• ei ole erivarustuse koodile: B03
• Käigukasti liik: Automaatkäigukast
• Sõidukivarustus: start-stopp-funktsioonita sõidukitele
• Nimetus: EP 1.953.578
• Tootja: EPS

• Mootorikood: OM 651.924
• ei ole erivarustuse koodile: B03
• Käigukasti liik: Automaatkäigukast
• Sõidukivarustus: start-stopp-funktsioonita sõidukitele
• Tootja: FACET

• Käigukasti liik: Käigukast 6 käiku, Automaatkäigukast
• ei ole erivarustuse koodile: B03
• Height [mm]: 40
• Resistor [Ohm]: 1,150
• Number of connectors: 2
• Tootja: VERNET

• Seerianumber: ECP-ME-008
• Tootja: NTY

• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0
• Tootja: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Käigukasti liik: Käigukast 6 käiku
• Number of pins: 2
• Nimetus: ANDUR, VŽNTVOLL
• Tootja: DLP

• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: ovaalne
• Tootja: FAST

• Number of pins: 3
• Nimetus: DE SS12309-12B1
• Tootja: DELPHI

• Käigukasti liik: Automaatkäigukast
• Sõidukivarustus: Start-Stopp-funktsiooniga sõidukile
• erivarustuse koodile: B03
• Number of pins: 3
• Nimetus: DE SS12020-12B1
• Tootja: DELPHI

• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Inductive Sensor, Passive sensor
• Number of connectors: 2
• Required quantity: 1
• Resistor [Ohm]: 680
• Alternatively:
• Colour: black
• Operating Mode: Electric
• Mounting Type: Bolted
• Number of pins: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 40
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Number of mounting bores: 1
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sõidukivarustus: Start-Stopp-funktsiooniga sõidukile
• Käigukasti liik: Automaatkäigukast
• erivarustuse koodile: B03
• Tootja: NRF

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Tootja: NRF

• Toode tuleb kindlaks määrata sõidukil või mootoril:
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Nimetus: ANDUR, VŽNTVOLL
• Tootja: MEY

• Length [mm]: 76
• Number of connectors: 2
• Weight [kg]: 0.031
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: without cable, with seal ring
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Tootja: FAST

• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor, Aktiivne andur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

Tootja: MAGNETI MARELLI

• Nimetus: Andur, v„ntvoll
• Tootja: MAG

• Ehitusaasta kuni: 08.2014
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MAX

• Käigukasti liik: Automaatkäigukast
• Sõidukivarustus: Start-Stopp-funktsiooniga sõidukile
• erivarustuse koodile: B03
• vajaminev tükihulk: 1
• Pinge [V]: 12
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Nimetus: CZUJNIK POO½ENIA WAU DB A KLASA 2,1 15-
• Tootja: BRM

• Käigukasti liik: Automaatkäigukast
• Sõidukivarustus: Start-Stopp-funktsiooniga sõidukile
• erivarustuse koodile: B03
• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Nimetus: Andur, v„ntvoll
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 75.7
• Number of connectors: 2
• Weight [kg]: 0.031
• Observe service information:
• Nimetus: SW 10 92 4455
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Käigukasti liik: Automaatkäigukast
• Sõidukivarustus: start-stopp-funktsioonita sõidukitele
• ei ole erivarustuse koodile: B03
• Number of mounting bores: 1
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• Nimetus: ANDUR, VŽNTVOLL
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sõidukivarustus: start-stopp-funktsioonita sõidukitele
• Ehitusaasta kuni: 08.2016
• Number of pins: 2
• Tootja: FAE