• Installatsiooni pool: Esisild
• Piduriketta liik: õhutusega
• Välisläbimõõt [mm]: 280
• Pidurikettajämedus [mm]: 28
• Aukude arv: 5
• Pealispind: kaetud
• Tootja: JP GROUP
• Lisainfo: Brake Disc

• Pidurikettajämedus [mm]: 9
• Veljeaukude hulk: 5
• Kinnitusaukude hulk: 2
• Jämedus/Tugevus (mm): 45
• Välisläbimõõt [mm]: 278
• Ava Ø (mm): 114
• Pealispind: kaetud
• Piduriketta liik: täis
• Installatsiooni pool: Tagasild
• Miinimumjämedus (mm): 8
• Tsentri läbimõõt (mm): 68,1
• Kaal (kg): 4,13
• Hooldusinfot jälgida:
• Nimetus: PIDURIKETAS
• Tootja: BLP
• Kogus pakendis: 2

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Bolt Hole Circle Ø [mm]: 68
• Height [mm]: 44.7
• Outer Diameter [mm]: 277.8
• Brake Disc Thickness [mm]: 9
• Minimum thickness [mm]: 8
• Number of bores: 5
• Brake Disc Type: solid
• Surface: Painted
• Tootja: ASHIKA-TARCZE
• Kogus pakendis: 2

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Pealispind: värvitud
• Piduriketta liik: täis
• Välisläbimõõt [mm]: 278
• Pidurikettajämedus [mm]: 9
• Miinimumjämedus (mm): 8
• Tsentri läbimõõt (mm): 68,1
• Kõrgus (mm): 44,6
• Aukude arv: 5
• Keermemõõt: 12.8
• Ava Ø (mm): 114,3
• Värv: must
• Kontrolltähistus: E1 90R-02 C0190/0525
• Nimetus: PIDURIKETAS
• Tootja: TRW

• Piduriketta liik: õhutusega
• Välisläbimõõt [mm]: 280
• Pidurikettajämedus [mm]: 28
• Tsentri läbimõõt (mm): 68
• Kõrgus (mm): 49
• Aukude arv: 5
• Installatsiooni pool: Esisild
• Miinimumjämedus (mm): 26
• Ava Ø (mm): 114
• Nimetus: PIDURIKETAS
• Tootja: MAX

• Installatsiooni pool: Esisild
• Piduriketta liik: õhutusega
• Pidurikettajämedus [mm]: 28
• Ava Ø (mm): 114
• Aukude arv: 5
• Kõrgus (mm): 49
• Tsentri läbimõõt (mm): 68
• Pealispind: kaetud
• Välisläbimõõt [mm]: 280
• Tootja: KAMOKA UK£ADY HAMULCOWE
• Kogus pakendis: 2

• Installatsiooni pool: Esisild
• Minimum thickness [mm]: 26
• Brake Disc Type: Vented
• Bore Diameter [mm]: 12.8
• Brake Disc Thickness [mm]: 28
• Bolt Hole Circle Ø [mm]: 114.3
• Number of Holes: 5
• Inner Diameter [mm]: 144
• Height [mm]: 49.1
• Centering Diameter [mm]: 68
• Outer Diameter [mm]: 280
• Tootja: DENCKERMANN ZAWIESZENIE
• Kogus pakendis: 2

• Fitting Position: Front Axle
• Bolt Hole Circle Ø [mm]: 68
• Height [mm]: 49.7
• Outer Diameter [mm]: 279.2
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Number of bores: 5
• Brake Disc Type: Vented
• Test Mark: ECE R90 APPROVED
• Surface: Painted
• Tightening Torque [Nm]: 108
• Tootja: ASHIKA
• Kogus pakendis: 2

• Kogus pakendis: 2
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 280
• Height [mm]: 49
• Number of Holes: 5
• Centering Diameter [mm]: 68
• Bolt Hole Circle Ø [mm]: 114.3
• Surface: Painted
• Weight [kg]: 15.35
• Minimum thickness [mm]: 26
• Tootja: TOMEX BRAKES

• Installatsiooni pool: Esisild
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 28
• Brake Disc Type: Vented
• Number of Holes: 5
• Height [mm]: 49.1
• Centering Diameter [mm]: 68
• Bolt Hole Circle Ø [mm]: 114.3
• Test Mark: ECE R90
• Replace in pairs only:
• Required quantity: 2
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Pidurikettajämedus [mm]: 28
• Veljeaukude hulk: 5
• Jämedus/Tugevus (mm): 49
• Välisläbimõõt [mm]: 280
• Ava Ø (mm): 114
• Pealispind: kaetud
• Piduriketta liik: sisemine õhutus
• Installatsiooni pool: Esisild
• Miinimumjämedus (mm): 26
• Tsentri läbimõõt (mm): 68
• Kaal (kg): 7,7
• Hooldusinfot jälgida:
• Nimetus: PIDURIKETAS
• Tootja: BLP
• Kogus pakendis: 2

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Piduriketta liik: täis
• Välisläbimõõt [mm]: 278
• Pidurikettajämedus [mm]: 9
• Kõrgus (mm): 44,5
• Miinimumjämedus (mm): 8
• Pealispind: kaetud
• Siseläbimõõt [mm]: 154,3
• Ava Ø (mm): 114,3
• Tsentri läbimõõt (mm): 68,1
• Puurpilt/auguarv: 05/07
• Rattapoldi ava läbimõõt [mm]: 12,8
• pakendi pikkus [cm]: 29,3
• pakendi laius [cm]: 29,3
• pakendi kõrgus [cm]: 10,5
• Kaal (kg): 3,9
• Nimetus: PIDURIKETAS
• Tootja: TEX

Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta

• Pidurikettajämedus [mm]: 28
• Veljeaukude hulk: 5
• Jämedus/Tugevus (mm): 49,2
• Välisläbimõõt [mm]: 280
• Ava Ø (mm): 114,3
• Pealispind: kaetud
• Piduriketta liik: sisemine õhutus
• Installatsiooni pool: Esisild
• Miinimumjämedus (mm): 26
• Tsentri läbimõõt (mm): 68
• Kaal (kg): 7,7
• Hooldusinfot jälgida:
• Tootja: FEBI
• Kogus pakendis: 2

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Kontrolltähistus: ECE-R90
• Kõrgus (mm): 49,3
• Piduriketta liik: õhutusega
• Pidurikettajämedus [mm]: 28
• Välisläbimõõt [mm]: 280
• Aukude arv: 5
• Ava Ø (mm): 68
• Pealispind: värvitud
• Tootja: METELLI UKL.HAMULCOWY

• Installatsiooni pool: Esisild
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 28
• Brake Disc Type: internally vented
• Minimum thickness [mm]: 26
• Height [mm]: 49.2
• Bolt Hole Circle Ø [mm]: 114
• Centering Diameter [mm]: 68
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 5
• Nimetus: PIDURIKETAS
• Tootja: QUARO

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Piduriketta liik: sisemine õhutus
• Pidurikettajämedus [mm]: 28
• Aukude arv: 5
• Kõrgus (mm): 49
• Tsentri läbimõõt (mm): 68
• Välisläbimõõt [mm]: 280
• Pealispind: kaetud
• Miinimumjämedus (mm): 26
• Väändejõud [Nm]: 108
• Tootja: BREMBO
• Nimetus: BR 09.9368.11
• Kvaliteediklass: Q

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Piduriketta liik: sisemine õhutus
• Pidurikettajämedus [mm]: 24
• Aukude arv: 5
• Kõrgus (mm): 49
• Tsentri läbimõõt (mm): 68
• Välisläbimõõt [mm]: 296
• Pealispind: kaetud
• Miinimumjämedus (mm): 22
• Väändejõud [Nm]: 108
• Nimetus: BR 09.A113.11
• Tootja: BREMBO

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Piduriketta liik: sisemine õhutus
• Välisläbimõõt [mm]: 280
• Pidurikettajämedus [mm]: 28
• Kõrgus (mm): 49,2
• Miinimumjämedus (mm): 26
• Pealispind: kaetud
• Siseläbimõõt [mm]: 144
• Ava Ø (mm): 114,3
• Tsentri läbimõõt (mm): 68
• Puurpilt/auguarv: 05/05
• Rattapoldi ava läbimõõt [mm]: 12,7
• pakendi pikkus [cm]: 30,8
• pakendi laius [cm]: 30,8
• pakendi kõrgus [cm]: 12,7
• Kaal (kg): 7,3
• Nimetus: PIDURIKETAS
• Tootja: TEX
• Kvaliteediklass: Q

Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 5
• MAPP code available:
• Height [mm]: 49.1
• Centering Diameter [mm]: 68
• Inner Diameter [mm]: 144
• Bolt Hole Circle Ø [mm]: 114.3
• Bore Diameter [mm]: 12.8
• Test Mark: E1 90R-02C0115/0744
• Nimetus: PIDURIKETAS
• Tootja: ATE

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Height [mm]: 49.3
• Weight [kg]: 15.24
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Outer Diameter [mm]: 280
• Number of Holes: 5
• Centering Diameter [mm]: 68
• Tightening Torque [Nm]: 108
• Bolt Hole Circle Ø [mm]: 114.3
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: without bolts/screws
• Version: JC
• Packaging length [cm]: 29.5
• Packaging width [cm]: 29.5
• Packaging height [cm]: 11
• Tootja: JURID