Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 28.5
- Seal Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Name: RONGASTIHEND
- Manufacturer: HAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Material: Aluminium,
Plastic - Transmission Type: Manual Transmission
- Vehicle Equipment: for vehicles without air conditioning
- Core Length [mm]: 430
- Core Width [mm]: 414
- Core Depth [mm]: 23
- Manufacturer: JP GROUP
-
Lisainfo: Radiator,
430x414 mm, PL/ ALU -
Additional information: Radiator,
430x414 mm, PL/ ALU
- Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Manual Transmission
- Core Length [mm]: 629
- Core Width [mm]: 399
- Core Depth [mm]: 22
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
-
Lisainfo: Radiator,
630x413 mm, PL/ ALU -
Additional information: Radiator,
630x413 mm, PL/ ALU
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Colour: blue
- Pressure [bar]: 1.4
- Material: Plastic
- Weight [kg]: 0.112
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Climate Zones: for hot climate zones
- Vehicle Equipment: for vehicles without air conditioning
- Material: Aluminium
- Core Length [mm]: 415
- Core Width [mm]: 430
- Core Depth [mm]: 23
- Version: Alternative
- Radiator type: Mechanically jointed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: MAX
- Vehicle Equipment: for vehicles without air conditioning
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 430
- Core Width [mm]: 414
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Vehicle Equipment: for vehicles without air conditioning
- Core Length [mm]: 430
- Core Width [mm]: 415
- Core Depth [mm]: 23
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
- Packaging length [cm]: 59.5
- Packaging width [cm]: 44
- Packaging height [cm]: 11.5
- Weight [kg]: 2.2
- Core Length [mm]: 430
- Core Width [mm]: 415
- Core Depth [mm]: 22
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Radiator type: Brazed cooling fins
- Manufacturer: KAMOKA
- Lisainfo: 7705117 KAMOKA
- Additional information: 7705117 KAMOKA
- Vehicle Equipment: for vehicles with air conditioning
- Material: Aluminium
- Core Length [mm]: 635
- Core Width [mm]: 415
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 632*389*26
- Additional information: 632*389*26
- Vehicle Equipment: for vehicles with air conditioning
- Material: Aluminium
- Core Length [mm]: 415
- Core Width [mm]: 635
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: MAX
- Climate Zones: for hot climate zones
- Vehicle Equipment: for vehicles without air conditioning
- Material: Aluminium
- Heating/Cooling: excl. Radiator Fan
- Core Length [mm]: 430
- Core Width [mm]: 415
- Core Depth [mm]: 23
- Version: Alternative
- Radiator type: Mechanically jointed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 430*414*23
- Additional information: 430*414*23
- Name: Radiator
- Quality class: ZJ
Lisainfo: POLO 01- (kvaliteediklass ZJ)
- Name: Radiator
- Quality class: ZJ
Lisainfo: CORDOBA 02- (kvaliteediklass ZJ)
- Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 630
- Core Width [mm]: 414
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 630
- Core Width [mm]: 414
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Vehicle Equipment: for vehicles with air conditioning
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 630
- Core Width [mm]: 414
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Transmission Type: Manual Transmission
- Vehicle Equipment: for vehicles with air conditioning
- Core Length [mm]: 633
- Core Width [mm]: 415
- Core Depth [mm]: 30
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
- Packaging length [cm]: 82.6
- Packaging width [cm]: 44.3
- Packaging height [cm]: 11.2
- Weight [kg]: 2.52
- Vehicle Equipment: for vehicles without air conditioning
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 430
- Core Width [mm]: 415
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Mechanically jointed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: without gasket/
seal - Water Tank Material (radiator): Plastic
-
Name: Radiaator,
mootorijahutus - Manufacturer: NIS
-
Lisainfo: VOLKSWAGEN POLO IV
(9N) (01- ) 1.4 i 16V -
Additional information: VOLKSWAGEN POLO IV
(9N) (01- ) 1.4 i 16V
- Engine Code: BUD
- Core Width [mm]: 414
- Core Length [mm]: 630
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Manufacturer: MAGNETI MARELLI
- Netopikkus [mm]: 0
- Netolaius [mm]: 0
- Netosügavus [mm]: 0
- Üldine informatsioon: radiator; pipe enlarging
- Manufacturer: VIKA
- Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 630
- Core Width [mm]: 416
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: VOLKSWAGEN POLO IV
(9N) (01- ) 1.4 i 16V -
Additional information: VOLKSWAGEN POLO IV
(9N) (01- ) 1.4 i 16V
Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box
- New Part:
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 630
- Core Width [mm]: 415
- Core Depth [mm]: 23
- Water Tank Material (radiator): Plastic
-
Transmission Type: Automatic Transmission,
Manual Transmission - Packaging width [cm]: 12
-
Net Weight [g]: 3,
274 - Packaging height [cm]: 46.5
- Packaging length [cm]: 79
- Manufacturer: MAHLE
- Name: MH CR505000S
Vehicle Equipment: for vehicles with air conditioning, for vehicles with/without air conditioning General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Core Length [mm]: 430
- Core Width [mm]: 415
- Core Depth [mm]: 23
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
- Packaging length [cm]: 63
- Packaging width [cm]: 47
- Packaging height [cm]: 16.5
- Weight [kg]: 1.84
- Heating/Cooling: incl. fan
- Core Length [mm]: 430
- Core Width [mm]: 415
- Core Depth [mm]: 20
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Radiator type: Mechanically jointed cooling fins
- Manufacturer: KAMOKA
- Climate Zones: for hot climate zones
- New Part:
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 430
- Core Width [mm]: 413
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Supplementary Article/Info 2: with seal ring
- Vehicle Equipment: for vehicles without air conditioning
- Transmission Type: Manual Transmission
- Packaging height [cm]: 10.5
-
Net Weight [g]: 1,
840 - Packaging width [cm]: 44
- Packaging length [cm]: 62.5
-
Name: Radiaator,
mootorijahutus - Manufacturer: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Name: Radiator
- Quality class: ZJ
Lisainfo: RAPID, 12- (kvaliteediklass ZJ)
- Core Length [mm]: 632
- Core Width [mm]: 395
- Core Depth [mm]: 24
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Packaging length [cm]: 79.5
- Packaging width [cm]: 47
- Packaging height [cm]: 11.5
- Weight [kg]: 2.42
- for OE number: 6Q0121253M
- Name: Radiator
- Quality class: PJ
Lisainfo: CORDOBA 02- (kvaliteediklass P)
- Quantity: 1
- Netopikkus [mm]: 0
- Netolaius [mm]: 0
- Netosügavus [mm]: 0
- Üldine informatsioon: radiator; pipe enlarging
- Manufacturer: VIKA
- Climate Zones: not for hot climate zones
- Vehicle Equipment: for vehicles without air conditioning
- Material: Aluminium
- Heating/Cooling: incl. fan
- Core Length [mm]: 430
- Core Width [mm]: 415
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 430*413*23
- Additional information: 430*413*23
- Vehicle Equipment: for vehicles without air conditioning
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 430
- Core Width [mm]: 415
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Climate Zones: for hot climate zones
- Vehicle Equipment: for vehicles without air conditioning
- Material: Aluminium
- Core Length [mm]: 415
- Core Width [mm]: 430
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
-
Name: Radiaator,
mootorijahutus - Manufacturer: MAX
- Vehicle Equipment: for vehicles without air conditioning
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 430
- Core Width [mm]: 415
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Mechanically jointed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: without gasket/
seal - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
- Name: NI 64103
-
Lisainfo: VOLKSWAGEN POLO IV
(9N) (01- ) 1.2 i 12V -
Additional information: VOLKSWAGEN POLO IV
(9N) (01- ) 1.2 i 12V
Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box
- Quantity: 1
- Netopikkus [mm]: 0
- Netolaius [mm]: 0
- Netosügavus [mm]: 0
- Üldine informatsioon: radiator and radiator fan for vehicle with heating
- Manufacturer: VIKA
- Climate Zones: not for hot climate zones
- Radiator type: Mechanically jointed cooling fins
- Heating/Cooling: incl. fan
- Core Length [mm]: 430
- Core Width [mm]: 415
- Core Depth [mm]: 20
- Water Tank Material (radiator): Plastic
- Vehicle Equipment: for vehicles without air conditioning
- Transmission Type: Manual Transmission
- Packaging width [cm]: 15.5
-
Net Weight [g]: 2,
590 - Packaging height [cm]: 61.5
- Packaging length [cm]: 90
-
Name: Radiaator,
mootorijahutus - Manufacturer: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.