• Number of pins: 3
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Fabrication Number: ECP-AU-024
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Component Number: 120-04-005
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Sensor Type: Active sensor
• for OE number: 36907601
• Manufacturer: KAMOKA

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV553

• Engine Code: BUD
• Sensor Type: Active sensor
• Fitting Depth [mm]: 24
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Construction Year from: 05.2006
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• for OE number: 03C 906 433 E
• Length [mm]: 69
• Supplementary Article/Info 2: with screw
• Fabrication Number: ECP-AU-011
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Component Number: 120-05-094
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Colour: grey
• Sensor Type: Active sensor
• for OE number: 036 906 433 A
• Manufacturer: KAMOKA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Construction Year from: 11.2006
• Vehicle Identification Number (VIN) from: 6Y74099348
• Height [mm]: 23.9
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Quantity: 1
• Connector Shape: oval
• Number of pins: 3
• General Information: hall sender camshaft
• Manufacturer: VIKA

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV507

• Number of pins: 3
• Fabrication Number: ECP-AU-007
• Manufacturer: NTY

• Engine Code: BUD
• Vehicle Identification Number (VIN) from: 6Y_74099348, 6Y_7B452577
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MAX
• Lisainfo: 24-0244
• Additional information: 24-0244

• Construction Year from: 05.2006
• Number of pins: 3
• Connector Shape: D Shape
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 24
• for OE number: 036 907 601 E
• for article number: 87278E
• Quality: OE EQUIVALENT
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV487

• Vehicle Identification Number (VIN) from: 6Y_7B452577, 6Y_74099348
• Height [mm]: 20
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable, with screw
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Engine Code: BUD
• Vehicle Identification Number (VIN) to: 6Y_7B452576, 6Y_74099347
• Manufacturer Restriction: KACO
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS
• Additional information: 1-953-464
• Lisainfo: 1-953-464

• Construction Year to: 07.2006
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV272
• Manufacturer: ESEN SKV

• General Information: hall sender camshaft
• Manufacturer: VIKA

• Engine Code: BUD
• Vehicle Identification Number (VIN) from: 6Y_7B452577, 6Y_74099348
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Vehicle Identification Number (VIN) to: 6Y74099347
• Vehicle Identification Number (VIN) from: 6Y74099348
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: grey
• Manufacturer: BREMI

• Quantity: 1
• Vehicle Identification Number (VIN) from: 6Y-74099 348, 6Y-7B452 577
• Supplementary Article/Info 2: with screw
• Colour: black
• Length [mm]: 69
• Width [mm]: 31
• Weight [kg]: 0.02
• Required quantity: 1
• Number of connectors: 3
• General Information: impulse sender; crackshaft; black
• Manufacturer: VIKA

• Height [mm]: 24
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Construction Year to: 07.2006
• Vehicle Identification Number (VIN) to: 6Y..7B452576
• Length [mm]: 48
• Supplementary Article/Info 2: with screw
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Construction Year to: 04.2007
• Engine Code: BUD
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"

• Transmission Type: Manual Transmission
• Vehicle Identification Number (VIN) from: 6Y-74099348, 6Y-7B452577
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: with screw, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: grey
• Alternatively:
• Number of pins: 3
• Weight [kg]: 0.024
• Alternative Repair Kit: 550119
• Fitting Depth [mm]: 19.5
• Manufacturer: ERA

• Vehicle Identification Number (VIN) to: 6Y7B452576, 6Y74099347
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS10772-12B1

• Vehicle Identification Number (VIN) from: 6Y7B452577, 6Y74099348
• Number of pins: 3
• Manufacturer: DELPHI

• Vehicle Identification Number (VIN) to: 6Y_7B452576, 6Y_74099347
• Number of mounting bores: 1
• Voltage [V]: 12
• Fitting Depth [mm]: 23.9
• Sensor Type: Hall Sensor
• Number of pins: 3
• Corresponds to the original part in colour: Milk White
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, VŽNTVOLL
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Identification Number (VIN) to: ******6Y*7B452576, ******6Y*74099347
• Block Separation:
• Length [mm]: 48
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with screw
• Name: ANDUR, VŽNTVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 6Y-7B452 576
• Number of pins: 3
• Connector Shape: D Shape
• Socket colour: light grey
• Manufacturer: FAE

• Construction Year to: 07.2006
• Vehicle Identification Number (VIN) to: 6Y..7B452 576
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Vehicle Identification Number (VIN) from: ******6Y*7B452577, ******6Y*74099348
• Block Separation:
• Length [mm]: 69
• Width [mm]: 31
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with screw
• Name: ANDUR, VŽNTVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 6Y74099347
• Vehicle Identification Number (VIN) from: 6Y74099348
• for OE number: 03C 906 433 E
• Width [mm]: 30
• Height [mm]: 28
• Length [mm]: 80
• Weight [kg]: 0.025
• Number of pins: 3
• Supplementary Article/Info 2: for crankshaft, with screw, without cable
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 20
• Connector Shape: D Shape
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: ******6Y*7B452576, ******6Y*74099347
• Block Separation:
• Length [mm]: 48
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with screw
• Name: SW 30 93 7093
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 6Y_7B452577, 6Y_74099348
• Fitting Depth [mm]: 20
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with screw
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Name: Andur, v„ntvoll
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Fitting Depth [mm]: 36
• Weight [kg]: 0.031
• Manufacturer: ERA

• Vehicle Identification Number (VIN) to: 6Y7B452576, 6Y74099347
• for OE number: 045906433A
• Required quantity: 1
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: for crankshaft, with screw, without cable
• Colour: grey
• Operating Mode: Electric
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 23.9
• Connector Shape: D Shape
• Number of mounting bores: 1
• Weight [kg]: 0.024
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 62
• Width [mm]: 23
• for OE number: 036 907 601 E
• Height [mm]: 45
• Weight [kg]: 0.018, 0.03
• Supplementary Article/Info 2: for camshaft, with seal ring, without cable
• Required quantity: 1
• Colour: black
• Operating Mode: Electric
• Sensor Type: Active sensor, Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Housing Colour: black
• Connector Shape: D Shape
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: ******6Y*7B452577, ******6Y*74099348
• Block Separation:
• Length [mm]: 69
• Width [mm]: 31
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with screw
• Name: SW 30 93 7317
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 6Y-7B452 577
• Number of pins: 3
• Sensor Type: Hall Sensor
• Connector Shape: D Shape
• Manufacturer: VDO

• Vehicle Identification Number (VIN) from: 6Y-7B452 577
• Number of pins: 3
• Sensor Type: Hall Sensor
• Connector Shape: D Shape
• Manufacturer: FAE

• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year to: 07.2006
• Vehicle Identification Number (VIN) to: 6Y..7B452 576
• Number of pins: 3
• Connector Shape: D Shape
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable, with screw
• for OE number: 045 906 433 A
• Manufacturer: MEAT&DORIA

• Supplementary Article/Info 2: for camshaft
• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 08.2006
• Vehicle Identification Number (VIN) from: 6Y_7B 452 577
• Number of pins: 3
• Sensor Type: Hall Sensor
• Quality: IAM
• Manufacturer: METZGER

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Construction Year to: 04.2007
• Engine Code: BUD
• Alternatively:
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
LUPO (6X1, 6E1), 09.
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
LUPO (6X1, 6E1), 09.
(kvaliteediklass: PJ)"

Manufacturer: BOSCH

• Number of connectors: 3
• Weight [kg]: 0.035
• for OE number: 036 907 601 E
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Depth [mm]: 24.3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Colour: grey
• Number of pins: 3
• Weight [kg]: 0.024
• Fitting Depth [mm]: 19.5
• Manufacturer: ERA

• Number of connectors: 3
• Weight [kg]: 0.035
• for OE number: 036 907 601 E
• Name: SW 30 93 7510
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 06.2006
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Engine Code: BUD
• Manufacturer: FACET
• Name: EP 1.953.269

• Height [mm]: 24
• Colour Coding: black
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Number of pins: 3
• Fitting Depth [mm]: 24
• Housing Colour: black
• Weight [kg]: 0.035
• Manufacturer: ERA

• Construction Year from: 08.2006
• Vehicle Identification Number (VIN) from: 6Y..7B452 577
• Manufacturer: BOSCH

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 08.2006
• Vehicle Identification Number (VIN) from: 6Y..7B452 577
• Warranty: 5 years warranty
• Manufacturer: HITACHI

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Required quantity: 1
• Number of pins: 3
• Supplementary Article/Info 2: for camshaft, without cable
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 36
• Housing Colour: black
• Connector Shape: D Shape
• Resistor [kOhm]: 34
• Weight [kg]: 0.018
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Length [mm]: 490
• Connector Shape: D Shape
• Manufacturer: FAE