• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 22
• Thickness [mm]: 3
• Manufacturer: 3RG

• Outer Diameter [mm]: 22
• Manufacturer: FAST

• Vehicle Identification Number (VIN) to: 214022
• Quantity per packing unit: 25
• Thickness [mm]: 3
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 22.4
• Weight [kg]: 0.006
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 214022
• Quantity per packing unit: 25
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 22.4
• Thickness [mm]: 3
• Material: ACM (Polyacrylate)
• Shape: Asymmetrical
• Alternative Repair Kit: 505.550, 505.540
• Manufacturer: ELRING

• Vehicle Identification Number (VIN) from: 214023
• Quantity per packing unit: 25
• Thickness [mm]: 2.5
• Material: NBR (nitrile butadiene rubber)
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 21
• Weight [kg]: 0.001
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity per packing unit: 5
• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Length [mm]: 21
• Material: Steel
• Surface: Phosphatized
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 13
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M12x1,75
• Length [mm]: 25
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FIS

• Quantity per packing unit: 10
• Thread Size: M14 x 1,5
• Supplementary Article/Info 2: with seal ring
• Colour: silver
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 214023
• Material: Steel
• Length [mm]: 37
• Spanner Size: 15
• Bolt Head-/Nut Design: Male Hex
• Thread Size: M12 x 1,75
• for OE number: 11519933
• Manufacturer: DELLO AUTOMEGA

• Thread Size: M14x1,5
• Length [mm]: 22
• Supplementary Article/Info 2: with seal ring
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FIS

• Material: Steel
• Length [mm]: 35
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• Thread Size: M14 x 1,75
• for OE number: 1013938
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 214023
• Quantity per packing unit: 100
• Inner Diameter [mm]: 10.8
• Outer Diameter [mm]: 20.8
• Thickness [mm]: 2.6
• Material: FPM (fluoride rubber)
• Shape: O-Ring
• Name: Rongastihend, oli „ravoolukruvi
• Manufacturer: ELR

• Quantity per packing unit: 10
• Thread Size: M14 x 1,5
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 214023
• Quantity per packing unit: 10
• Thread Size: M 12
• Thread Pitch [mm]: 1.75
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 214022
• Thread Size: M14x1,5x20
• Spanner Size: 13 mm
• Bolt Head-/Nut Design: Male Hex
• Supplementary Article/Info 2: with seal ring
• Name: Sulgurkruvi, olivann
• Manufacturer: DRM

• Vehicle Identification Number (VIN) from: ***********214023
• Length [mm]: 37
• Outer Diameter [mm]: 27
• External Thread Size: M12 x 1,75
• Thread Length [mm]: 17
• Quality/ Grade: 5.8
• Spanner Size: 15
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 25
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: ***********214023
• Length [mm]: 37
• Outer Diameter [mm]: 27
• External Thread Size: M12 x 1,75
• Thread Length [mm]: 17
• Quality/ Grade: 5.8
• Spanner Size: 15
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 25
• Weight [kg]: 0.039
• Supplementary Article/Info 2: with seal ring
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M14 x 1,50
• Manufacturer: 3RG

• Outer Diameter [mm]: 23
• Inner Diameter [mm]: 13
• Thickness [mm]: 3
• Packing Type: Blister Pack
• Manufacturer: CORTECO

• Vehicle Identification Number (VIN) from: 214023
• Length [mm]: 37
• Outer Diameter [mm]: 27
• External Thread Size: M12 x 1,75
• Thread Length [mm]: 17
• Quality/ Grade: 5.8
• Spanner Size: 15
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 25
• Weight [kg]: 0.039
• Supplementary Article/Info 2: with seal ring
• Name: SW 40 94 4442
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 35
• Outer Diameter [mm]: 28
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 12
• Quality/ Grade: 5.8
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Phosphatized
• Screw length below head [mm]: 21
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 214023
• Thread Size: M12x1,75
• Length [mm]: 18
• Supplementary Article/Info 2: with seal ring
• Name: FI 257862.001
• Manufacturer: FA1

• Length [mm]: 35
• Outer Diameter [mm]: 28
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 12
• Quality/ Grade: 5.8
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Phosphatized
• Screw length below head [mm]: 20
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M14x1.5
• Manufacturer: FAST

• Length [mm]: 35
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 12
• Quality/ Grade: 5.8
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Phosphatized
• Screw length below head [mm]: 21
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 35
• Outer Diameter [mm]: 28
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 12
• Quality/ Grade: 5.8
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Phosphatized
• Screw length below head [mm]: 20
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: SW 50 92 1096
• Manufacturer: SWAG
• Lisainfo: 50 92 1096 SWA
• Additional information: 50 92 1096 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 34.5
• Outer Diameter [mm]: 28
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 7
• Quality/ Grade: 5.8
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Phosphatized
• Screw length below head [mm]: 20
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: ENERGY

• Vehicle Identification Number (VIN) to: 214022
• Quantity per packing unit: 5
• Inner Diameter [mm]: 13
• Thickness [mm]: 3
• Alternatively:
• Material: ACM (Polyacrylate)

• Quantity per packing unit: 5
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE

• Manufacturer: DRM

Name: USZCZELKA —RUBY SPUSTU OLEJU 12.5X22.8X3 GUM. 5SZT.

• Thickness [mm]: 3
• Inner Diameter [mm]: 12.5
• Outer Diameter [mm]: 22.8
• Name: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Manufacturer: AJU

• Material: Steel
• Thread Size: M14x1,5
• Length [mm]: 34
• Screw length below head [mm]: 21
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 13
• Seal Material: NBR (nitrile butadiene rubber)
• Packing Type: Bag
• Supplementary Article/Info 2: with seal ring
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) to: 214022
• Thread Size: M14x1,5x20
• Spanner Size: 13 mm
• Alternative Repair Kit: 505.540
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ELRING

• Supplementary Article/Info 2: with seal ring
• Thread Size: M 14 x 1,50 x 20
• Length [mm]: 34
• Packing Type: Blister Pack
• Spanner Size: 13
• Manufacturer: CORTECO

• Thread Size: M18 x 1,5
• Screw length below head [mm]: 18
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 17
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M12 x 1,75
• Screw length below head [mm]: 24
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 15
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 214023
• Thread Size: M12x1,75x17
• Bolt Head-/Nut Design: Male Hex
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ELRING

• Vehicle Identification Number (VIN) from: 214023
• Quantity per packing unit: 100
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 21
• Thickness [mm]: 2.5
• Material: NBR (nitrile butadiene rubber)
• Manufacturer: FISCHER

• Quantity per packing unit: 100
• Inner Diameter [mm]: 13
• Thickness [mm]: 3
• Material: NBR (nitrile butadiene rubber)
• Manufacturer: FISCHER

• Vehicle Identification Number (VIN) to: 214022
• Quantity per packing unit: 100
• Inner Diameter [mm]: 13
• Thickness [mm]: 3
• Material: ACM (Polyacrylate)

• Vehicle Identification Number (VIN) from: 214023
• Quantity per packing unit: 10
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 21
• Thickness [mm]: 2.5
• Alternatively:
• Material: NBR (nitrile butadiene rubber)

• Quantity per packing unit: 10
• Inner Diameter [mm]: 13
• Thickness [mm]: 3
• Material: NBR (nitrile butadiene rubber)
• Alternatively: