• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 22
• Thickness [mm]: 3
• Tootja: 3RG

• Outer Diameter [mm]: 22
• Tootja: FAST

• Kerenumber (VIN) kuni: 214022
• Kogus pakendis: 25
• Jämedus/Tugevus (mm): 3
• Siseläbimõõt [mm]: 13
• Välisläbimõõt [mm]: 22,4
• Kaal (kg): 0,006
• Installatsiooni pool: Õlivann
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kerenumber (VIN) kuni: 214022
• Kogus pakendis: 25
• Siseläbimõõt [mm]: 13
• Välisläbimõõt [mm]: 22,4
• Jämedus/Tugevus (mm): 3
• Materjal: ACM((Polyacryl-Kautschuk)
• Kuju: asümmetriline
• alternatiivne remondikomplekt: 505.550, 505.540
• Tootja: ELRING

• Kerenumber (VIN) alates: 214023
• Kogus pakendis: 25
• Jämedus/Tugevus (mm): 2,5
• Materjal: NBR (Nitril-Butadien-Kautschuk)
• Siseläbimõõt [mm]: 11
• Välisläbimõõt [mm]: 21
• Kaal (kg): 0,001
• Installatsiooni pool: Õlivann
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kogus pakendis: 5
• Keermemõõt: M 14
• Keerme samm (mm): 1,5
• Pikkus (mm): 21
• Materjal: Metall
• Pealispind: fosfeeritud
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Võtmekaugus: 13
• Piirangutega toode/piirangu info: koos tihendiga
• Nimetus: SULGURKRUVI, OLIVANN
• Tootja: HAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Keermemõõt: M12x1,75
• Pikkus (mm): 25
• Nimetus: SULGURKRUVI, OLIVANN
• Tootja: FIS

• Kogus pakendis: 10
• Thread Size: M14 x 1,5
• Supplementary Article/Info 2: with seal ring
• Colour: silver
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Kerenumber (VIN) alates: 214023
• Materjal: Metall
• Pikkus (mm): 37
• Võtmekaugus: 15
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Keermemõõt: M12 x 1,75
• OE-numbri jaoks: 11519933
• Tootja: DELLO AUTOMEGA

• Keermemõõt: M14x1,5
• Pikkus (mm): 22
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SULGURKRUVI, OLIVANN
• Tootja: FIS

• Materjal: Metall
• Pikkus (mm): 35
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Keermemõõt: M14 x 1,75
• OE-numbri jaoks: 1013938
• Tootja: DELLO AUTOMEGA

• Kerenumber (VIN) alates: 214023
• Kogus pakendis: 100
• Siseläbimõõt [mm]: 10,8
• Välisläbimõõt [mm]: 20,8
• Jämedus/Tugevus (mm): 2,6
• Materjal: FPM (Fluor-Kautschuk)
• Kuju: O-rõngas
• Nimetus: Rongastihend, oli „ravoolukruvi
• Tootja: ELR

• Kogus pakendis: 10
• Thread Size: M14 x 1,5
• Supplementary Article/Info 2: with seal ring
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Kerenumber (VIN) alates: 214023
• Kogus pakendis: 10
• Keermemõõt: M 12
• Keerme samm (mm): 1,75
• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Kerenumber (VIN) kuni: 214022
• Keermemõõt: M14x1,5x20
• Võtmekaugus: 13 mm
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: Sulgurkruvi, olivann
• Tootja: DRM

• Kerenumber (VIN) alates: ***********214023
• Pikkus (mm): 37
• Välisläbimõõt [mm]: 27
• Väliskeerme mõõde: M12 x 1,75
• Keermepikkus (mm): 17
• Kvaliteet/klass: 5.8
• Võtmekaugus: 15
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Pealispind: tsingitud
• Kruvipikkus kruvipea all [mm]: 25
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kerenumber (VIN) alates: ***********214023
• Pikkus (mm): 37
• Välisläbimõõt [mm]: 27
• Väliskeerme mõõde: M12 x 1,75
• Keermepikkus (mm): 17
• Kvaliteet/klass: 5.8
• Võtmekaugus: 15
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Pealispind: tsingitud
• Kruvipikkus kruvipea all [mm]: 25
• Kaal (kg): 0,039
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SULGURKRUVI, OLIVANN
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M14 x 1,50
• Tootja: 3RG

• Välisläbimõõt [mm]: 23
• Siseläbimõõt [mm]: 13
• Jämedus/Tugevus (mm): 3
• Konteineri tüüp: Blisterpack
• Tootja: CORTECO

• Kerenumber (VIN) alates: 214023
• Pikkus (mm): 37
• Välisläbimõõt [mm]: 27
• Väliskeerme mõõde: M12 x 1,75
• Keermepikkus (mm): 17
• Kvaliteet/klass: 5.8
• Võtmekaugus: 15
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Pealispind: tsingitud
• Kruvipikkus kruvipea all [mm]: 25
• Kaal (kg): 0,039
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 40 94 4442
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 35
• Välisläbimõõt [mm]: 28
• Väliskeerme mõõde: M14 x 1,5
• Keermepikkus (mm): 12
• Kvaliteet/klass: 5.8
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Pealispind: fosfeeritud
• Kruvipikkus kruvipea all [mm]: 21
• Kaal (kg): 0,04
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Hooldusinfot jälgida:
• Nimetus: SULGURKRUVI, OLIVANN
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kerenumber (VIN) alates: 214023
• Keermemõõt: M12x1,75
• Pikkus (mm): 18
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: FI 257862.001
• Tootja: FA1

• Pikkus (mm): 35
• Välisläbimõõt [mm]: 28
• Väliskeerme mõõde: M14 x 1,5
• Keermepikkus (mm): 12
• Kvaliteet/klass: 5.8
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Pealispind: fosfeeritud
• Kruvipikkus kruvipea all [mm]: 20
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Hooldusinfot jälgida:
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M14x1.5
• Tootja: FAST

• Pikkus (mm): 35
• Väliskeerme mõõde: M14 x 1,5
• Keermepikkus (mm): 12
• Kvaliteet/klass: 5.8
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Pealispind: fosfeeritud
• Kruvipikkus kruvipea all [mm]: 21
• Kaal (kg): 0,04
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: BLUE PRINT

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 35
• Välisläbimõõt [mm]: 28
• Väliskeerme mõõde: M14 x 1,5
• Keermepikkus (mm): 12
• Kvaliteet/klass: 5.8
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Pealispind: fosfeeritud
• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Hooldusinfot jälgida:
• Nimetus: SW 50 92 1096
• Tootja: SWAG
• Lisainfo: 50 92 1096 SWA

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 34.5
• Outer Diameter [mm]: 28
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 7
• Quality/ Grade: 5.8
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Phosphatized
• Screw length below head [mm]: 20
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Tootja: ENERGY

• Kerenumber (VIN) kuni: 214022
• Kogus pakendis: 5
• Siseläbimõõt [mm]: 13
• Jämedus/Tugevus (mm): 3
• valikuliselt:
• Materjal: ACM((Polyacryl-Kautschuk)

• Kogus pakendis: 5
• Tootja: DR MOTOR PRZEWODY PRZELEWOWE

• Tootja: DRM

Nimetus: USZCZELKA —RUBY SPUSTU OLEJU 12.5X22.8X3 GUM. 5SZT.

• Jämedus/Tugevus (mm): 3
• Siseläbimõõt [mm]: 12,5
• Välisläbimõõt [mm]: 22,8
• Nimetus: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Tootja: AJU

• Material: Steel
• Thread Size: M14x1,5
• Length [mm]: 34
• Screw length below head [mm]: 21
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 13
• Seal Material: NBR (nitrile butadiene rubber)
• Packing Type: Bag
• Supplementary Article/Info 2: with seal ring
• Tootja: METZGER

• Kerenumber (VIN) kuni: 214022
• Keermemõõt: M14x1,5x20
• Võtmekaugus: 13 mm
• alternatiivne remondikomplekt: 505.540
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: ELRING

• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Keermemõõt: M 14 x 1,50 x 20
• Pikkus (mm): 34
• Konteineri tüüp: Blisterpack
• Võtmekaugus: 13
• Tootja: CORTECO

• Thread Size: M18 x 1,5
• Screw length below head [mm]: 18
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 17
• Supplementary Article/Info 2: with seal ring
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M12 x 1,75
• Screw length below head [mm]: 24
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 15
• Supplementary Article/Info 2: with seal ring
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Kerenumber (VIN) alates: 214023
• Keermemõõt: M12x1,75x17
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: ELRING

• Kerenumber (VIN) alates: 214023
• Kogus pakendis: 100
• Siseläbimõõt [mm]: 11
• Välisläbimõõt [mm]: 21
• Jämedus/Tugevus (mm): 2,5
• Materjal: NBR (Nitril-Butadien-Kautschuk)
• Tootja: FISCHER

• Kogus pakendis: 100
• Siseläbimõõt [mm]: 13
• Jämedus/Tugevus (mm): 3
• Materjal: NBR (Nitril-Butadien-Kautschuk)
• Tootja: FISCHER

• Kerenumber (VIN) kuni: 214022
• Kogus pakendis: 100
• Siseläbimõõt [mm]: 13
• Jämedus/Tugevus (mm): 3
• Materjal: ACM((Polyacryl-Kautschuk)

• Kerenumber (VIN) alates: 214023
• Kogus pakendis: 10
• Siseläbimõõt [mm]: 11
• Välisläbimõõt [mm]: 21
• Jämedus/Tugevus (mm): 2,5
• valikuliselt:
• Materjal: NBR (Nitril-Butadien-Kautschuk)

• Kogus pakendis: 10
• Siseläbimõõt [mm]: 13
• Jämedus/Tugevus (mm): 3
• Materjal: NBR (Nitril-Butadien-Kautschuk)
• valikuliselt: