• Production date to: 201912
• Fitting Position: Rear Axle
• Height [mm]: 220
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Production date to: 201702
• Length [mm]: 108
• Weight [kg]: 0.16
• Packaging length [cm]: 10.7
• Packaging width [cm]: 3.3
• Packaging height [cm]: 3.3
• Manufacturer: FEBEST
• Lisainfo: 1929-001 FEBEST
• Additional information: 1929-001 FEBEST

• Production date to: 202009
• Fitting Position: Rear Axle
• Height [mm]: 220
• Weight [kg]: 0.375
• Packaging length [cm]: 22
• Packaging width [cm]: 8
• Packaging height [cm]: 8
• Manufacturer: FEBEST

• Production date to: 201702
• Fitting Position: Rear Axle
• Name: Rattakalde korrektuurkruvi
• Manufacturer: MAX

• Braking/Driving Dynamics: for vehicles without Adaptive Drive
• not for vehicle type: M Performance
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control, for vehicles without M technology

• Production date to: 202009
• Packaging length [cm]: 14
• Packaging width [cm]: 3.3
• Packaging height [cm]: 3.3
• Weight [kg]: 0.197
• Length [mm]: 76
• Manufacturer: FEBEST

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX
• Lisainfo: 72-3362
• Additional information: 72-3362

• Fitting Position: Rear Axle
• Block Separation:
• Manufacturer: JP GROUP

Suspension: for vehicles with electronic suspension control, for vehicles with standard suspension

• Braking/Driving Dynamics: for vehicles without Adaptive Drive
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control, for vehicles without M technology

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA

• Suspension: for vehicles with electronic suspension control
• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Manufacturer: KAVO PARTS

• Fitting Position: Rear Axle
• Quantity Unit: Set
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MEY

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with electronic suspension control

• Fitting Position: Front Axle
• Article number of recommended accessories: 533872, 534055, 532290
• Manufacturer: GSP ZAWIESZENIE

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Aluminium
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Front Axle
• Block Separation:

Suspension: for vehicles with standard suspension, for vehicles with electronic suspension control

• not for vehicle type: M Performance
• Braking/Driving Dynamics: for vehicles without Adaptive Drive
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: KYB

Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control, for vehicles without M technology

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Required quantity: 1
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

• for OE number: 33536860161
• Fitting Position: Rear Axle
• Material: PU (Polyurethane), Thermoplast
• Weight [g]: 233
• Component Number: 2
• Name: IM 51182
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle
• Weight [kg]: 0.238
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Weight [kg]: 0.228
• Guarantee: 5 years guarantee
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Inner Diameter [mm]: 11
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.438
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Name: Vedruamordi tugilaager
• Manufacturer: FEB
• Additional information: FE109124
• Lisainfo: FE109124

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front Axle both sides
• Suspension: for vehicles with electronic suspension control
• Name: Shock absorber protection kit left+right
• Quality class: PJ

• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• Replace in pairs only:
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

Suspension: for vehicles with standard suspension, for vehicles with electronic suspension control for OE number: 33 50 6 862 725, 33 50 6 864 452, 6 862 725, 6 864 452

• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• Replace in pairs only:
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Name: Laager - K„„ndmik. BMW P.
• Manufacturer: LMI

Suspension: for vehicles with standard suspension, for vehicles with electronic suspension control for OE number: 33 50 6 862 725, 33 50 6 864 452, 6 862 725, 6 864 452

• Inner Diameter [mm]: 11
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.438
• Supplementary Article/Info 2: without ball bearing
• Name: SW 33 10 0229
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date to: 202009
• Fitting Position: Rear Axle
• Weight [kg]: 0.491
• Packaging length [cm]: 14.6
• Packaging width [cm]: 8
• Packaging height [cm]: 4.8
• Manufacturer: FEBEST

• Construction Year to: 11.2014
• Fitting Position: Front Axle Left, Front Axle Right
• Suspension: for vehicles without electronic suspension control
• Required quantity: 2
• Thread Size: M10
• Number of Holes: 3
• Bearing Type: Ball Bearing
• Name: COC 49102312
• Manufacturer: CORTECO

• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 1
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

Suspension: for vehicles with standard suspension, for vehicles with electronic suspension control

• for OE number: 31336860160
• Fitting Position: Front Axle
• Material: Rubber, PU (Polyurethane)
• Weight [g]: 563
• Component Number: 4
• Name: IM 51092
• Manufacturer: ORIGINAL IMPERIUM

• Production date to: 202009
• Fitting Position: Front Axle
• Weight [kg]: 0.72
• Packaging length [cm]: 22
• Packaging width [cm]: 20.5
• Packaging height [cm]: 13.5
• Manufacturer: FEBEST

• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.468
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: without ball bearing
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Thread Size: 10
• Fabrication Number: AD-BM-016
• Manufacturer: NTY

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Quantity per packing unit: 2
• Weight [kg]: 0.438
• Guarantee: 5 years guarantee
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: with integrated ball bearing
• Quality class: PJ
• Name: Suspension strut support bearing left, right

for OE number: 31 30 6 863 135, 31 30 6 869 888, 6 854 507, 6 869 888, 6 880 438, 31 30 6 791 701, 31 30 6 855 817, 6 855 817, 6 863 135, 31 30 6 880 438, 31 30 6 854 507, 6 791 701

• Braking/Driving Dynamics: for vehicles without Adaptive Drive
• Fitting Position: Front Axle Left, Front Axle Right
• Number of threaded holes: 3
• for thread size: M 10
• Supplementary Article/Info 2: without rolling bearing
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 01.2015
• Material: Rubber/Metal
• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle
• Observe service information:
• Outer Diameter [mm]: 180, 125
• Name: Vedruamordi tugilaager
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 31306863135
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: METZGER

• Construction Year from: 01.2015
• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 31 30 6 854 507
• Manufacturer: GSP ZAWIESZENIE

• Construction Year from: 01.2015
• Suspension: for vehicles without M technology
• Supplementary Article/Supplementary Info: with integrated ball bearing
• Alternatively:
• Fitting Position: Front Axle
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 01.2015
• Height [mm]: 70
• Outer Diameter [mm]: 180, 125
• Internal Thread Size: M10 x 1,5
• Material: Rubber/Metal
• Number of Holes: 3
• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle
• Weight [kg]: 1.03
• Supplementary Article/Info 2: with ball bearing
• Observe service information:
• Manufacturer: FEB

Technical Information: Vehicles can be equipped with different suspension strut mount differing in terms of quantity of fitting holes (3 or 6) and thread (M8 or M10). Please identify the fitted product for comparison. More information in the attached technical bulletin. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. BMW P. 1 F20/30 LE/PR 10- Z O½YSKIEM

• Construction Year to: 02.2015
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with bearing
• Number of mounting bores: 3
• Internal Thread [mm]: M10 x 1,5
• Manufacturer: OPTIMAL ZAWIESZENIE

• Construction Year from: 01.2015
• Suspension: for vehicles without electronic suspension control
• Internal Thread Size: M8 x 1,25
• Material: Rubber/Metal
• Number of Holes: 6
• Fitting Position: Front Axle Right, Front Axle Left
• Weight [kg]: 1.22
• Supplementary Article/Info 2: with ball bearing
• Observe service information:
• Name:
• Manufacturer: FEB

Technical Information: Vehicles can be equipped with different suspension strut mount differing in terms of quantity of fitting holes (3 or 6) and thread (M8 or M10). Please identify the fitted product for comparison. More information in the attached technical bulletin. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.2014
• Braking/Driving Dynamics: for vehicles without EDC
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Number of mounting bores: 3
• Manufacturer: BILSTEIN
• Name: BI 12-251377

• Construction Year to: 12.2014
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing, with fastening material
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Replace in pairs only:
• Number of mounting bores: 6
• Mounting points diameter [mm]: 8
• for OE number: 31 30 6 881 929, 6 881 929
• Supplementary Article/Supplementary Info: with integrated ball bearing
• Article number of recommended accessories: 42501 01, 42502 01
• Manufacturer: LMI

Suspension: for vehicles with standard suspension, for vehicles with sports suspension Name: Laager - K„„ndmik. BMW P. 1 F20/30 LE/PR 10- Z O½YSKIEM

• Construction Year to: 01.2015
• Height [mm]: 70
• Outer Diameter [mm]: 180, 125
• Internal Thread Size: M10 x 1,5
• Material: Aluminium
• Number of Holes: 3
• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle
• Weight [kg]: 1.03
• Supplementary Article/Info 2: with ball bearing
• Observe service information:
• Name: SW 20 93 9925
• Manufacturer: SWAG

Technical Information: Vehicles can be equipped with different suspension strut mount differing in terms of quantity of fitting holes (3 or 6) and thread (M8 or M10). Please identify the fitted product for comparison. More information in the attached technical bulletin. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.2015
• Suspension: for vehicles without electronic suspension control
• Internal Thread Size: M8 x 1,25
• Material: Rubber/Metal
• Number of Holes: 6
• Fitting Position: Front Axle Right, Front Axle Left
• Weight [kg]: 1.22
• Supplementary Article/Info 2: with ball bearing
• Observe service information:
• Name: SW 20 10 2532
• Manufacturer: SWAG

Technical Information: Vehicles can be equipped with different suspension strut mount differing in terms of quantity of fitting holes (3 or 6) and thread (M8 or M10). Please identify the fitted product for comparison. More information in the attached technical bulletin. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.2015
• Suspension: for vehicles without M technology
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Number of mounting bores: 6
• Manufacturer: BILSTEIN
• Name: BI 12-283286
• Quality class: Q

• Construction Year from: 01.2015
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Suspension: for vehicles with M technology
• Required quantity: 2
• Thread Size: M8
• Number of Holes: 6
• Bearing Type: Ball Bearing
• Name: COC 49470888
• Manufacturer: CORTECO

• Construction Year from: 01.2015
• Suspension: for vehicles with M technology
• Braking/Driving Dynamics: for vehicles with Adaptive Drive
• for special equipment code: 02VF
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Info 2: with bearing
• Manufacturer: METZGER

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with rolling bearing
• Number of mounting bores: 3
• Thread Size: M8
• Quantity per axle: 2
• Manufacturer: METZGER

• Suspension: for vehicles with electronic suspension control
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Number of mounting bores: 6
• Mounting points diameter [mm]: 8
• for OE number: 31 30 6 881 930, 6 881 930
• Supplementary Article/Supplementary Info: with integrated ball bearing
• Name: Vedruamordi tugilaager
• Manufacturer: LMI

• Construction Year from: 01.2015
• Suspension: for vehicles with electronic suspension control
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 177
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 1.22
• Supplementary Article/Info 2: with ball bearing
• Name: Vedruamordi tugilaager
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Shock Absorber System: Normal Suspension
• Weight [kg]: 1.03
• Supplementary Article/Info 2: with bearing
• Guarantee: 5 years guarantee
• Packaging length [cm]: 18.9
• Packaging width [cm]: 9.8
• Packaging height [cm]: 21.5
• Manufacturer: MONROE

• Construction Year from: 01.2015
• Suspension: for vehicles with electronic suspension control
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 177
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 1.42
• Supplementary Article/Info 2: with ball bearing
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.