• Construction Year to: 12.2006
• Lambda Sensor: Diagnostic Probe
• OE-numbri jaoks: 15407117
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 425
• Pistikkontaktide arv: 4
• Kaal (g): 101
• Brutokaal [g]: 134
• Manufacturer: DENSO

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Ülekandeliinide arv: 4
• Lambda andur: Sond
• Manufacturer: KAMOKA

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Lambda Sensor: Diagnostic Probe
• Fitting Position: for cylinder 4-6, after catalytic converter
• Vehicle Equipment: for vehicles without trailer hitch
• Required quantity: 1
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 340
• Lambda andur: soojendatud
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA ELEKTRYKA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Lambda Sensor: Diagnostic Probe
• Block Separation:
• Fitting Position: after catalytic converter, for cylinder 4-6
• Lambda andur: Sõrmesensor
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Käigukasti liik: Käigukast
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Vehicle Equipment: for vehicles with factory mounted tow bar, for vehicles without factory fitted towbar

• Lambda Sensor: Regulating Probe
• Length [mm]: 1,400
• Fabrication Number: ESL-BM-022
• Manufacturer: NTY

• Fitting Position: after catalytic converter
• Lambda andur: soojendatud, Diagnoosisond
• Väliskeerme mõõde: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 460
• Kaal (kg): 0,086
• Name: SW 33 10 3200
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe
• Kaablipikkus (mm): 480
• Lambda andur: Titaanandur, soojendatud
• Name: DE ES21190-12B1
• Manufacturer: DELPHI

Fitting Position: to cylinder 1, to cylinder 3, after catalytic converter

• Engine Code: N52 B25 A, N52 B25 B, N52 B25 BE
• for facelift:
• Vehicle Equipment: for vehicles without trailer hitch
• Lambda Sensor: Diagnostic Probe
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Lambda andur: Sõrmesensor, soojendatud, Keere eelmääritud
• Pistikkontaktide arv: 4
• OE-numbri jaoks: V99760001
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Pikkus (mm): 350
• Väljalaskesüsteem: pärast katalüsaatorit
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe
• Block Separation:
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, for cylinder 1-3, for cylinder 4-6 Vehicle Equipment: for vehicles with factory mounted tow bar, for vehicles without factory fitted towbar

• Fitting Position: for cylinder 1-3, after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Vehicle Equipment: for vehicles with trailer hitch
• Kaablipikkus (mm): 614
• Lambda andur: Titaanandur, soojendatud
• Manufacturer: DELPHI
• Name: DE ES20368-12B1

• Fitting Position: Front, Exhaust Manifold, after catalytic converter
• Engine Code: N52 B25 A
• Supplementary Article/Info 2: Catalytic Converter at exhaust manifold
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Lambda andur: Titaanandur, soojendatud, Keere eelmääritud
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2006
• Lambda Sensor: Diagnostic Probe
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 93
• Brutokaal [g]: 140
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 4-6
• Vehicle Equipment: for vehicles without factory fitted towbar
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 380
• ka universaaltootena saadav vaata toode-nr.: 0258986602
• Soovituslik vahetusintervall (km): 250 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda andur: soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 450
• tootekoodile: 81633E
• Kvaliteet: OE EQUIVALENT
• Name: Lambda andur
• Manufacturer: MD

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 1-3
• Vehicle Equipment: for vehicles with factory mounted tow bar
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 482
• Soovituslik vahetusintervall (km): 250 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 12.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Engine Code: N52 B25 A, N52 B25 B, N52 B25 BE
• Kaablipikkus (mm): 1 392
• Lambda andur: Lineaarne lambda andur, soojendatud
• Manufacturer: DLP

Name: SONDA LAMBDA BMW 125I, 130I, 135I, 323I TOURING 04-16

• Fitting Position: for cylinder 1-3
• Vehicle Equipment: for vehicles without trailer hitch
• Lambda andur: Titaanandur
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 460
• Pistikkontaktide arv: 4
• Installatsiooni pool: pärast katalüsaatorit
• Name: Lambda andur
• Manufacturer: MEY

• Lambda Sensor: Lambda Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV405

• Engine Code: N52 B25 A, N52 B25 B
• Construction Year to: 11.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: Exhaust Manifold
• Required quantity: 2
• Lambda andur: Diagnoosisond
• Pistikkontaktide arv: 5
• Kaablipikkus (mm): 570
• OE-numbri jaoks: 7 569 930
• Kvaliteet: OE EQUIVALENT
• Name: SONDA LAMBDA BMW 1 05-
• Manufacturer: MD

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 1-3
• Vehicle Equipment: for vehicles without factory fitted towbar
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 430
• ka universaaltootena saadav vaata toode-nr.: 0258986602
• Soovituslik vahetusintervall (km): 250 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: for cylinder 4-6
• Vehicle Equipment: for vehicles with factory mounted tow bar
• Lambda andur: Titaanandur
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 460
• Piirangutega toode/piirangu info: soojuskaitsega
• Pistikkontaktide arv: 4
• Installatsiooni pool: pärast katalüsaatorit
• Name: Lambda andur
• Manufacturer: MEY

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 640
• Number of pins: 6
• Total Length [mm]: 780
• Manufacturer: ERA

• Construction Year to: 11.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: for cylinder 4-6, before catalytic converter
• Kaablipikkus (mm): 312
• Lambda andur: Lineaarne lambda andur, soojendatud
• Name: DE ES20555-12B1
• Manufacturer: DELPHI

• Construction Year to: 11.2005
• Fitting Position: for cylinder 1-3, before catalytic converter
• Lambda Sensor: Regulating Probe
• Kaablipikkus (mm): 352
• Lambda andur: Lineaarne lambda andur, soojendatud
• Manufacturer: DELPHI
• Name: DE ES20554-12B1

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: N52 B25 A
• Construction Year to: 11.2005
• Fitting Position: for cylinder 1-3, before catalytic converter
• Required quantity: 1
• Lambda Sensor: Regulating Probe
• Length [mm]: 380
• Kaablipikkus (mm): 400
• Ühendushulk: 5
• Ülekandeliinide arv: 5
• Manufacturer: FACET

Lambda andur: soojendatud, Titaanandur, Lineaarne lambda andur, Keere eelmääritud

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 4-6
• Vehicle Equipment: for vehicles with factory mounted tow bar
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 510
• ka universaaltootena saadav vaata toode-nr.: 0258986602
• Soovituslik vahetusintervall (km): 250 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: N52 B25 A
• Construction Year to: 11.2005
• Fitting Position: for cylinder 1-3, before catalytic converter
• Required quantity: 1
• Lambda Sensor: Regulating Probe
• Length [mm]: 380
• Kaablipikkus (mm): 400
• Ühendushulk: 5
• Ülekandeliinide arv: 5
• Name: EP 1.998.467
• Manufacturer: EPS

Lambda andur: soojendatud, Titaanandur, Lineaarne lambda andur, Keere eelmääritud

• Engine Code: N52 B25 A
• Construction Year to: 11.2005
• Fitting Position: for cylinder 4-6, before catalytic converter
• Required quantity: 1
• Lambda Sensor: Regulating Probe
• Length [mm]: 340
• Kaablipikkus (mm): 350
• Ühendushulk: 5
• Ülekandeliinide arv: 5
• Manufacturer: FACET

Lambda andur: soojendatud, Titaanandur, Lineaarne lambda andur, Keere eelmääritud

• Construction Year from: 12.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: for cylinder 4-6, before catalytic converter
• Kaablipikkus (mm): 910
• Lambda andur: Lineaarne lambda andur, soojendatud
• Name: DE ES21275-12B1
• Manufacturer: DELPHI

• Engine Code: N52 B25 A
• Construction Year to: 11.2005
• Fitting Position: for cylinder 4-6, before catalytic converter
• Required quantity: 1
• Lambda Sensor: Regulating Probe
• Length [mm]: 340
• Kaablipikkus (mm): 350
• Ühendushulk: 5
• Ülekandeliinide arv: 5
• Name: EP 1.998.464
• Manufacturer: EPS

Lambda andur: soojendatud, Titaanandur, Lineaarne lambda andur, Keere eelmääritud

• Construction Year to: 11.2005
• Required quantity: 1
• Lambda Sensor: Regulating Probe
• Installatsiooni pool: katalüsaatori ees
• Pistikkontaktide arv: 6
• Kaablipikkus (mm): 400
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Pistikukatte kuju: ovaalne
• Manufacturer: VALEO

Lambda andur: Titaanandur, Lineaarne lambda andur, Keere eelmääritud, soojendatud

• Required quantity: 1
• Vehicle Equipment: for vehicles with trailer hitch
• Lambda Sensor: Diagnostic Probe
• Installatsiooni pool: katalüsaatori ees, pärast katalüsaatorit
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 450
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Manufacturer: VALEO

• Production date to: 31.10.2005
• Lambda andur: Lineaarne lambda andur
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 400
• Pistikkontaktide arv: 6
• Name: Lambda andur
• Manufacturer: MEY

Fitting Position: before catalytic converter, for cylinder 1-3, for cylinder 4-6

• Construction Year to: 11.2005
• Fitting Position: for cylinder 1-3, before catalytic converter
• Required quantity: 1
• Lambda andur: Lineaarne lambda andur
• Kaablipikkus (mm): 400
• Pistikkontaktide arv: 6
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii
• Manufacturer: HELLA
• Name: HE 6PA009166801

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Lambda andur: soojendatud
• Väliskeerme mõõde: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 5
• Kaablipikkus (mm): 406
• Kaal (kg): 0,097
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Lambda Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY
• Name: CE 09SKV915

• Construction Year from: 12.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 1-3
• Ülekandeliinide arv: 5
• pikkus üle kõige (mm): 1 400
• Soovituslik vahetusintervall (km): 250 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: N52 B25 A
• Construction Year from: 12.2005
• Fitting Position: for cylinder 1-3, before catalytic converter
• Required quantity: 1
• Lambda Sensor: Regulating Probe
• Length [mm]: 1,400
• Kaablipikkus (mm): 1 500
• Ühendushulk: 5
• Ülekandeliinide arv: 5
• Name: EP 1.998.482
• Manufacturer: EPS

Lambda andur: soojendatud, Titaanandur, Lineaarne lambda andur, Keere eelmääritud

• Construction Year to: 11.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 4-6
• Ülekandeliinide arv: 5
• pikkus üle kõige (mm): 340
• Soovituslik vahetusintervall (km): 250 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 11.2005
• Required quantity: 1
• Lambda Sensor: Regulating Probe
• Installatsiooni pool: katalüsaatori ees
• Pistikkontaktide arv: 6
• Kaablipikkus (mm): 350
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Pistikukatte kuju: ovaalne
• Name: VA 368396
• Manufacturer: VALEO

Lambda andur: Titaanandur, Lineaarne lambda andur, Keere eelmääritud, soojendatud

• Construction Year from: 12.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 4-6
• Ülekandeliinide arv: 5
• pikkus üle kõige (mm): 910
• Soovituslik vahetusintervall (km): 250 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 11.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 1-3
• Ülekandeliinide arv: 5
• pikkus üle kõige (mm): 380
• Soovituslik vahetusintervall (km): 250 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 11.2005
• Fitting Position: for cylinder 4-6, before catalytic converter
• Lambda Sensor: Regulating Probe
• Pikkus (mm): 400
• Pistikkontaktide arv: 6
• Manufacturer: FAE

• Engine Code: N52 B25 A
• Fitting Position: Rear
• Lambda andur: Diagnoosisond, soojendatud
• Pinge [V]: 12
• Ühendushulk: 4
• Kaablipikkus (mm): 500
• Manufacturer: PIERBURG

• Engine Code: N52 B25 A, N52 B25 B
• Construction Year from: 12.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: Exhaust Manifold
• Required quantity: 2
• Lambda andur: Lineaarne lambda andur
• Pistikkontaktide arv: 5
• Kaablipikkus (mm): 1 290
• tootekoodile: 81668E
• Kvaliteet: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year from: 12.2005
• Required quantity: 1
• Lambda Sensor: Regulating Probe
• Installatsiooni pool: katalüsaatori ees
• Pistikkontaktide arv: 6
• Kaablipikkus (mm): 950
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Pistikukatte kuju: ovaalne
• Manufacturer: VALEO
• Name: VA 368430

Lambda andur: Titaanandur, Lineaarne lambda andur, Keere eelmääritud, soojendatud

• Engine Code: N52B25A, N52B25B
• Construction Year from: 12.2005
• Fitting Position: Exhaust Manifold
• Required quantity: 2
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Kaablipikkus (mm): 1 405
• Keermemõõt: M18 x 1,5
• Ühendushulk: 5
• Pistikukatte kuju: D-kuju
• Pikkus (mm): 1 250
• Pistikkontaktide arv: 5
• Lambda andur: Sond, Keere eelmääritud
• Ülekandeliinide arv: 5
• Väljalaskesüsteem: pärast katalüsaatorit
• Kaal (kg): 0,188
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: for cylinder 4-6, after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Pikkus (mm): 400
• Pistikkontaktide arv: 4
• tehnilise informatsiooni number: Universal 77015
• Manufacturer: FAE