• Fitting Position: frontal sided
• Vehicle Identification Number (VIN) to: 4B-Y-036 000
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Width [mm]: 10
• Material: FPM (fluoride rubber)
• Manufacturer: JP GROUP
• Lisainfo: Oil seal, 35x48x10 mm
• Additional information: Oil seal, 35x48x10 mm

• Vehicle Identification Number (VIN) from: 4B-Y-036 001
• Fitting Position: frontal sided
• Outer Diameter [mm]: 47
• Inner Diameter [mm]: 32
• Width [mm]: 10
• Manufacturer: JP GROUP A/S
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: frontal sided
• Vehicle Identification Number (VIN) from: 4B-Y-036 001
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Width [mm]: 10
• Manufacturer: JP GROUP
• Lisainfo: Oil seal, 35x48x10
• Additional information: Oil seal, 35x48x10

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)

• Fitting Position: frontal sided
• Weight [kg]: 0.016
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Material: ACM (Polyacrylate)
• Required quantity: 1
• Thickness [mm]: 10
• General Information: seal ring;35*48*10 mm
• Manufacturer: VIKA

• Fitting Position: frontal sided
• General Information: seal ring
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) to: 4B-Y-036000
• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Radial Shaft Seal Design: ASW
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 01967

• Engine Code: AQE, ARH
• Fitting Position: Front
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Inner Diameter 1 [mm]: 32
• Material: FPM (fluoride rubber)
• for OE number: 026103085D
• Swirl Type: Alternating Twist
• Dust Cover: with dust lip
• Name: CO 12012709
• Manufacturer: CORTECO
• Additional information: 12012709
• Lisainfo: 12012709

• Vehicle Identification Number (VIN) to: ******4B*Y*036000
• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Material: ACM (Polyacrylate)
• Fitting Position: frontal sided
• Weight [kg]: 0.016
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Fabrication Number: NUP-VW-012
• Manufacturer: NTY

• Vehicle Identification Number (VIN) to: 4B-Y-036000
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Dust Cover: with dust lip
• Swirl Type: Right-hand Twist
• Fitting Position: frontal sided
• Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AJP
• Fitting Position: frontal sided
• Height [mm]: 10
• Material: ACM (Polyacrylate)
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Manufacturer: BGA

• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Dust Cover: with dust lip
• Swirl Type: Alternating Twist
• Fitting Position: frontal sided
• Material: FPM (fluoride rubber)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 2
• Vehicle Identification Number (VIN) to: 4B-Y-036 000
• Thickness [mm]: 10
• for OE number: 068 103 085 E
• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Weight [kg]: 0.023
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AJP
• Fitting Position: transmission sided
• Height [mm]: 10
• Material: NBR (nitrile butadiene rubber)
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Manufacturer: BGA

• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Dust Cover: with dust lip
• Manufacturer: TOPRAN

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: frontal sided
• Vehicle Identification Number (VIN) to: 4B-Y-036 000
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Manufacturer: ELRING

• Engine Code: AJP, AQE, ARH
• Vehicle Identification Number (VIN) to: -> 4BY036000
• Fitting Position: frontal sided
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 48
• Inner Diameter 1 [mm]: 35
• Material: FPM (fluoride rubber)
• for OE number: 034115137A
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Name: CO 12010739
• Manufacturer: CORTECO

• Engine Code: ARH
• Quantity per packing unit: 10
• Fitting Position: frontal sided
• Weight [kg]: 0.035
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: frontal sided
• General Information: shaft oil seal
• Manufacturer: BORSEHUNG

• Engine Code: AQE, ARH
• Fitting Position: frontal sided
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Inner Diameter 1 [mm]: 32
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 038103085A
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Name: CO 20026413
• Manufacturer: CORTECO
• Additional information: 20026413
• Lisainfo: 20026413

• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Fitting Position: frontal sided
• Weight [kg]: 0.01
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 4B-Y-036 001
• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Radial Shaft Seal Design: ASW
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 01969

• Fitting Position: frontal sided
• Vehicle Identification Number (VIN) from: 4B-Y-036 001
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Supplementary Article/Info 2: with mounting sleeve
• Observe mounting information:
• Manufacturer: ELRING
• Lisainfo: 155.560 ELR
• Additional information: 155.560 ELR

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Fitting Position: frontal sided
• Engine Code: AJP, AQE, ARH
• Block Separation:
• Material: PTFE (polytetrafluoroethylene), ACM (Polyacrylate)
• Supplementary Article/Info 2: with mounting sleeve
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: A SL
• Swirl Type: Right-hand Twist
• Manufacturer: REINZ USZCZELKI

• Engine Code: ARH
• Fitting Position: frontal sided
• Supplementary Article/Info 2: with mounting sleeve
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 48
• Inner Diameter 1 [mm]: 35
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 038103085
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Name: CO 20026412
• Manufacturer: CORTECO

• Supplementary Article/Info 2: with flange
• Fitting Position: transmission sided
• Fabrication Number: NUP-VW-006
• Manufacturer: NTY

• for OE number: 06B 103 171 B
• Fitting Position: transmission sided
• Thickness [mm]: 15.7
• Inner Diameter [mm]: 85
• Supplementary Article/Info 2: with flange
• Outer Diameter 1 [mm]: 131
• Outer Diameter 2 [mm]: 152
• Observe service information:
• Fabrication Number: NUP-VW-008
• Manufacturer: NTY

• Fitting Position: transmission sided
• Radial Shaft Seal Design: IWD
• Dust Cover: with dust lip
• Swirl Type: Left-hand Twist
• Outer Diameter [mm]: 131
• Inner Diameter [mm]: 85
• Thickness [mm]: 16
• Supplementary Article/Info 2: with flange
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: transmission sided
• Housing Type: with housing
• Housing material: Cast Aluminium
• Sealing lip material: PTFE (polytetrafluoroethylene)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AQE
• Construction Year from: 01.1999
• Fitting Position: transmission sided
• for OE number: 038103171
• Material: PTFE (polytetrafluoroethylene)
• Manufacturer: FAI

• Engine Code: AJP, AQE, ARH
• Fitting Position: transmission sided
• Supplementary Article/Info 2: with mounting sleeve
• Lisainfo: Seal flange for crankshaft, rear
• Additional information: Seal flange for crankshaft, rear

• Fitting Position: transmission sided
• Weight [kg]: 0.22
• Inner Diameter [mm]: 85
• Required quantity: 1
• Supplementary Article/Info 2: with flange
• Outer Diameter 1 [mm]: 131
• Outer Diameter 2 [mm]: 152
• Thickness [mm]: 15.7
• General Information: seal ring
• Manufacturer: VIKA

• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Housing Type: Integrated housing
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 01412

• Engine Code: AQE, ARH
• Quantity per packing unit: 5
• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Weight [kg]: 0.265
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AJP
• Fitting Position: transmission sided
• Height [mm]: 16
• Inner Diameter [mm]: 131
• Outer Diameter [mm]: 155
• Housing Type: with housing
• Manufacturer: BGA

• for OE number: 03G 105 021 C
• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Fitting Position: frontal sided
• Outer Diameter [mm]: 48
• Weight [kg]: 0.031
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ARH
• Fitting Position: transmission sided
• Weight [kg]: 0.239
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AQE, ARH
• Fitting Position: transmission sided
• Supplementary Article/Info 2: with mounting sleeve
• Height 1 [mm]: 15.7
• Outer Diameter 1 [mm]: 131
• Outer Diameter 2 [mm]: 152
• Inner Diameter 1 [mm]: 85
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 028103171B
• Swirl Type: Alternating Twist
• Name: CO 20033462
• Manufacturer: CORTECO

• Thickness [mm]: 15.7
• Inner Diameter [mm]: 85
• Fitting Position: transmission sided
• Outer Diameter 1 [mm]: 131
• Outer Diameter 2 [mm]: 152
• Weight [kg]: 0.22
• Supplementary Article/Info 2: with flange
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Radial Shaft Seal Design: IWD
• Swirl Type: Left-hand Twist
• Housing Type: with housing
• Supplementary Article/Info 2: with mounting sleeve
• Manufacturer: ELRING

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Fitting Position: transmission sided
• Engine Code: AJP, AQE, ARH
• Block Separation:
• Material: PTFE (polytetrafluoroethylene)
• Supplementary Article/Info 2: with flange
• Name: RN 81-90006-00
• Manufacturer: REINZ

• Engine Code: ARH
• Fitting Position: transmission sided
• Supplementary Article/Info 2: with flange, with mounting sleeve
• Height 1 [mm]: 15.7
• Outer Diameter 1 [mm]: 131
• Outer Diameter 2 [mm]: 152
• Inner Diameter 1 [mm]: 85
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 06B103171B
• Name: CO 20019557
• Manufacturer: CORTECO