• Length [mm]: 57
• Number of connectors: 2
• Supplementary Article/Supplementary Info: without gasket/seal
• Lisainfo: Temperature sensor for air intake
• Additional information: Temperature sensor for air intake

• Number of pins: 2
• Housing Colour: black
• Manufacturer: DELLO AUTOMEGA

• for OE number: 12 38 079
• Length [mm]: 57
• Supplementary Article/Supplementary Info: without gasket/seal
• Fabrication Number: ECT-PL-001
• Manufacturer: NTY
• Name: NTY ECT-PL-001

• Length [mm]: 57
• Material: Plastic
• Number of pins: 2
• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV677

Manufacturer: DELLO AUTOMEGA

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 1342567, 6238422, 90542063
• Manufacturer: MEAT&DORIA

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor, Active sensor
• Manufacturer: KAMOKA

• Number of pins: 2
• Housing Colour: black
• Manufacturer: DELPHI
• Name: DE TS10521

• Fabrication Number: ESS-FT-002
• Manufacturer: NTY

• Engine Code: Z 12 XEP
• Manufacturer Restriction: BOSCH
• Colour: black
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 1.880.170, 1.880.190
• Name: EP 1.830.239
• Manufacturer: EPS

• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 30
• Alternative Repair Kit: 550700
• Manufacturer: ERA

• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 2
• Housing Colour: blue
• Supplementary Article/Supplementary Info: with seal
• Corresponds to the original part in colour: black, light blue, white
• Manufacturer: METZGER

• Number of pins: 3
• Pressure [Pa] from: 10,000
• Pressure [Pa] to: 115,000
• Fabrication Number: ECM-PL-007

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• for OE number: 55187973, 1920 JH, 4M5G 12K073 AB, 93183528
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year to: 12.2011
• Manufacturer: BOSCH
• Name: BS 0281002170

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: Z 12 XEP
• Name: EP 1.994.033
• Manufacturer: EPS

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET
• Additional information: CS0336 VERNET
• Lisainfo: CS0336 VERNET

• Number of pins: 3
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Manufacturer: FAST

• Tightening torque to [Nm]: 22
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour Coding: blue
• Name: MM SPA103
• Manufacturer: MAGNETI MARELLI

• Fabrication Number: ECP-PL-010
• Manufacturer: NTY

• Engine Code: Z 12 XEP
• Name: EP 1.957.006
• Manufacturer: EPS

• Construction Year to: 12.2011
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Manufacturer: BOSCH

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114441
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114341
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: Z 12 XEP
• Name: EP 1.953.361
• Manufacturer: EPS

• Length [mm]: 300
• Fitting Position: Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-PL-008
• Manufacturer: NTY

• Number of pins: 3
• Manufacturer: DELPHI

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Construction Year to: 11.2010
• Engine Code: Z12XEP
• for OE number: 1 319 158
• Colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: for camshaft, without cable, with seal ring
• Connector Shape: oval
• Resistor [kOhm]: 320
• Weight [kg]: 0.03
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Voltage [V]: 12
• Corresponds to the original part in colour: anthracite
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009163921
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Pressure from [kPA]: 13
• Manufacturer: DELPHI
• Name: DE PS10121
• Lisainfo: PS10121
• Additional information: PS10121

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 117.5
• Measuring Range from [V]: 0.392
• Measuring Range to [V]: 4.75
• Number of connectors: 3
• Manufacturer: VERNET

• for OE number: 855528, 9193654
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 575
• Number of pins: 4
• Number of circuits: 4
• Thread Size: M 18x1,5
• Connector Shape: oval
• Manufacturer: DELLO AUTOMEGA

• Lambda Sensor: Diagnostic Probe
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Construction Year to: 12.2011
• Fitting Position: after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Manufacturer: DELLO AUTOMEGA

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Transmission Type: Manual Transmission
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 450
• Number of connectors: 4
• Version: Planar
• Weight [kg]: 0.105
• Manufacturer: VEMO GERMANY

Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Weight [kg]: 0.022
• Resistor [Ohm]: 850
• Rated Voltage [V]: 12
• Housing Diameter [mm]: 20.7
• Manufacturer: ERA

• Lambda Sensor: Diagnostic Probe, Planar probe
• Fitting Position: after catalytic converter
• Number of pins: 4
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 12.2011
• Manufacturer: BOSCH

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Engine Code: Z 12 XEP
• Voltage [V]: 12
• Length [mm]: 290
• Number of circuits: 4
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV073

• Transmission Type: Manual Transmission
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Connector Shape: oval
• Thread Size: M18 x 1,5
• Weight [kg]: 0.085
• Length [mm]: 520
• for OE number: 08 55 386
• Cable Length [mm]: 210
• Number of circuits: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 6G000001
• Fitting Position: Front, Upper
• Exhaust System: before catalytic converter
• Lambda Sensor: Regulating Probe
• Length [mm]: 400
• Number of connectors: 4
• Manufacturer: VERNET

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 220
• Weight [kg]: 0.067
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe, Unheated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 520
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 520
• Manufacturer: DELPHI
• Name: DE ES20314-12B1
• Quality class: PJ

Additional information: "Tootja: DELPHI
ASTRA F CLASSIC KOMB
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
ASTRA F CLASSIC KOMB
(kvaliteediklass: PJ)"

• Resistor [Ohm]: 9
• Length [mm]: 275
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 275
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM003

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 325
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV680

• Conductor Number: 4
• Resistor [Ohm]: 9
• Length [mm]: 575
• Number of circuits: 4
• Cable Length [mm]: 575
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Construction Year to: 12.2011
• Manufacturer: BOSCH
• Name: BS 0261230101

• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Manufacturer: FAE

• Fitting Position: Front, Upper, before catalytic converter
• Vehicle Identification Number (VIN) to: 56999999
• Block Separation:
• Cable Length [mm]: 300
• Manufacturer: DELPHI
• Name: DE ES20315-12B1

Lambda Sensor: Regulating Probe, Diagnostic Probe, Planar probe, Heated Additional information: "Tootja: DELPHI
VECTRA C GTS, 08.02-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
VECTRA C GTS, 08.02-
(kvaliteediklass: PJ)"

• Engine Code: Z 12 XEP
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 448
• Weight [kg]: 0.11
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: Z 12 XEP
• Fitting Position: after catalytic converter
• Quantity: 1
• Lambda Sensor: Diagnostic Probe, Planar probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 350
• Thread Size: M18x1,5mm
• Resistor [Ohm]: 9
• Overall Length [mm]: 300
• Cable Length [mm]: 300
• Number of pins: 4
• Weight [kg]: 0.12
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2011
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986602

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 12.2011
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 300
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258006499

• Construction Year to: 12.2011
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 325
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258006924

• for OE number: 855528, 855429
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 575
• Number of pins: 4
• Weight [g]: 86
• Gross Weight [g]: 119
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
CORSA C (F08, F68),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CORSA C (F08, F68),
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: for pre-catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• for OE number: 08 55 355
• Length [mm]: 570
• Number of circuits: 4
• Weight [kg]: 0.104
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Number to: 19KP7461
• Lambda Sensor: Regulating Probe
• Length [mm]: 570
• Technical Information Number: Universal 77015
• Fitting Position: before catalytic converter
• Manufacturer: FAE

• Engine Number from: 19KP7462
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 350
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 350
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358066121
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 93186115
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Weight [g]: 83
• Gross Weight [g]: 116
• Manufacturer: DENSO
• Name: DN DOX-2050

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
CORSA D, 07.06-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CORSA D, 07.06-
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe
• Length [mm]: 450
• Technical Information Number: Universal 77015
• Fitting Position: before catalytic converter
• Manufacturer: FAE

• Fitting Position: Front, Lower, before catalytic converter
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Cable Length [mm]: 325
• Name: DE ES21083-12B1
• Manufacturer: DELPHI